Reviews Hose Splicer Fittings

Brass Barb Union Fittings LIONMAX Barb Splicer Mender Hose Fittings 4 PCS 1/4 Inch to 1/4 Inch Barb Hose ID with 8 Hose Clamps for Air/Water/Fuel/Oil

  • 【SOLID BRASS MATERIAL】Barb fitting is made of brass. Strong and durable, not easy to rust and corrode. Has a long service life. NOTE: Brass barb hose fitting is not suitable for potable water..
  • 【-65~250°F 150PSI】Hose barb fitting has strong temperature resistance and good pressure resistance. So barb union splicer fitting is often used for water, fuel, oil delivery..
  • 【PACKAGE CONTAINS】1/4'' hose ID barb fitting (4 PCS) + 304 stainless steel hose clamp (8 PCS). You don't need to buy additional accessories..
  • 【TIGHT CONNECTION】1/4 inch ID hose barb fitting is smooth overall without burrs. Size meets the standard. The strong barb and hose clamps make the barbed hose splicer not easy to leak during the connection process..
  • 【WIDE APPLICATION】Brass barb hose fitting is suitable for pipe repair. Various hoses can be connected to 1/4'' hose ID hose barb fittings. Meet your multiple needs..
Check Stock

Quickun Hose Bard Fitting 3/4 x 3/4 Hose ID Brass Hex Barbed Splicer Mender Joint Adapter Union Fitting Pack of 2

  • Type: Barb Hose Splicer / Mender. Hose ID: 3/4".
  • Adapter for connecting a hose to a hose connection.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Plastic Hose Barb Fitting Hose Fitting Adapter for Air Water Fuel 3/16 x 3/16 1/4 x 1/4 3/8 x 3/8 1/2 x 1/2 5/8 x 5/8 8Pcs

  • 【Package Included】 8 pieces Plastic barb connector in total, including 2pcs 3/16" x 3/16", 2pcs 1/2" x 1/2", 2pcs 5/8" x 5/8", 1pcs 1/4" x 1/4", 1pcs 3/8" x 3/8".
  • 【Material】 Barbed hose fittings made of 100% PP polypropylene plastic that is durable, strong, water resistant, chemical-resistant materials to assure long life.
  • 【Working Temperature & Pressure】 The plastic hose fittings temperature range from -9 °F to 175 °F, but hose splicer is not resistant to oil.
  • 【Easy Installation】 Barb hose easy to install without glue, or other tools required. Barbed ends grab 5/8" tubing tightly that won't leak.
  • If necessary, you can use a heat gun or blower to soften the end of the tube before inserting it, after cooling, the tube will remain tight.
  • 【Wide Application】 Pipe connectors Suitable for applications in pharmaceutical, food and beverage, laboratory, chemical processing and others.
Check Stock

Hardkits 69 pcs Brass Hose Barb Fittings Assortment Kits 1/8 3/16 1/4 5/16 3/8 1/2 Barb Splicer & Barb To Male Coupler & Tee

  • 【PACKAGE INCLUDES】 -----This Barb Fittings Assortment contains Splicer 3/16"(5) 1/4"(5) 5/16"(5) 3/8"(5) 1/2"(5) ，Barb Tee:1/8"(2) 3/16"(2) 1/4"(2) 5/16"(2) 3/8"(2) 1/2"(2).
  • 【PACKAGE INCLUDES】 ----- This npt barb kits contains Male Coupler: 3/16" barb to 1/8" MNPT(2) 1/4" barb to 1/8" MNPT (2) 1/4" barb to 1/4" MNPT (2) 5/16" barb to 1/4" MNPT (4) 5/16" barb to 3/8" MNPT (4) 3/8" barb to 1/4" MNPT(4) 3/8" barb to 3/8" MNPT(2) 1/2" barb to 3/8" MNPT(2) 1/2" barb to 1/2" MNPT(2) &304 stainless steel clamp rings 8 pcs.
  • 【CREATE A GOOD SEALING】 ----- NPT barb assortmentUse these hose barb fittings and clamp rings to efficiently connect the flexible tubing or hose. This assorted brass barbed fittings set would allow you to maintain a tight seal..
  • 【WIDE APPLICATIONS】 ----- This brass crimp fitting are essential component to prevent leakage of oil, gas, fluid and fuel. Great for industrial use, automotive, aquarium, marine and much more..
  • 【HIGH QUALITY】Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability，Temperatures range from -40 to 260 F..
Check Stock

JENSWILL 1 Stainless Steel Hose Barb Fitting Tee 3 way Barbed Splicer Mender Union Fitting with 3PCs Hose Clamp for Oil Water Air

  • Material - Made of 304 stainless steel, corrosion resistant ductility at high temperatures, and low magnetic permeability..
  • Feature - Barbed fitting creates a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve (3pcs hose clamp free as gift)..
  • Working Temperature & Pressure - Maximum working pressure of 2800 psi.
  • Temperatures range from -868 to 1472 ℉/-500 to 800 °C..
  • Widely Use - Application of our barb splicer is very wide. Hose fittings are used in systems such as beer brewing, air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation..
Check Stock

Brass Barb Reducer Fittings LIONMAX 1 to 3/4 Barb Hose ID Hose Barb Splicer Mender with 4 Hose Clamps for Air/Water/Fuel 2 PCS

  • 【WITH HOSE CLAMPS】1'' to 3/4'' Hose barb reducer is suitable for connecting 1 inch ID hose to 3/4 inch ID hose. The package contains barb splicer reducer 2 PCS and 304 stainless steel hose clamp 4 PCS (size can adjust). You don't need to buy additional accessories..
  • 【-65~250°F 150PSI】Brass barb reducer fitting has strong temperature resistance and good pressure resistance. So barb hose reducer is often used for water, fuel, oil delivery..
  • 【SOLID BRASS MATERIAL】Barb splicer reducer is made of brass. Strong and durable, not easy to rust and corrode. Hose barb fitting has a long service life. NOTE: Brass barb reducer fitting is not suitable for potable water..
  • 【WIDE APPLICATION】Barb hose reducer is suitable for pipe repair. Various hoses can be connected to this 1 inch to 3/4 inch ID hose barb fitting. Meet your multiple needs..
  • 【TIGHT CONNECTION】This brass barb reducer is smooth overall without burrs. Size meets the standard. The strong barb and hose clamps make the barbed splicer reducer fitting not easy to leak during the connection process..
Check Stock

Vis Brass Hose Barb Fitting Splicer/Union/Mender 3/8 Barbed x 3/8 Barbed Fuel Line Connector Pack of 5

  • 3/8" barb splicer for connecting two hoses with the same diameter in a straight run.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Barbed fitting for a tight seal on hoses.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Da by 3 pcs 3/8\(10mm) Barb Splicer Mender Hose Brass Barb Fitting with 6 pcs Stainless Steel Pipe Clamps for Water/Fuel/Air

  • Packaging Includes：3 PCS Two-Ways Brass Hose Mender, 6 PCS Stainless steel pipe clamps..
  • Size: The outer diameter of the hose barb is 3/8"(10mm), Suitable for connecting 3/8"(10mm) inner diameter hose..
  • Material: Hose barb splicer mender made of brass. Pipe clamps all components are all made of 304 stainless steel and will not rust..
  • Solid Connections:The hose barb can be solid connected to the hose（Fit hose witch inner diameter of 10mm）,The pipe clamps can create a tight seal on flexible or semi-rigid hose..
  • Characteristic: Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Stainless steel for corrosion resistance and will not rust, super sturdy..
Check Stock

Beduan Brass Hose Barb Reducer, 3/8\ to 5/16\ Barb Hose ID, Reducing Barb Brabed Fitting Splicer Mender Union Air Water Fuel

  • Material: Brass. Connections: 3/8" x 5/16".
  • Type : Barb Hose Mender/Splicer Reducer. Adapter for connecting a hose to a hose threaded connection of a different diameter.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Temperatures range from -40 to 160 F. 150 PSI maximum working pressure.
Check Stock

JoyTube Brass Hose Barb Fitting Metals Splicer Mender 1/4 Barb Hose Union Fuel Gas Water Air Pack of 12

  • Connections: 1/4” to 1/4”. Our hose barb fitting is long enough,which make sure it can insert hose but not easy to be apart. Our barb union will provide good seal when you use it to connect hose..
  • Application of our barb splicer is very wide, such as Temperature control circuits, pneumatic circuits, vacuum and fluid systems test apparatus, lubricant, coolant lines.(Air/Water/Fuel/Boat/Gas) ..
  • Connects to a hose on both ends. Union coupling for connecting two hoses with the same diameter in a straight run..
  • Brass barb union for corrosion resistance, ductility at high temperatures, and low magnetic permeability..
  • The barbed stems create better tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (not include)..
Check Stock

Beduan Brass Hose Barb Reducer 5/16 to 1/4 Barb Hose ID Reducing Barb Brabed Fitting Splicer Mender Union Air Water Fuel 4Pcs

  • Material: Brass. Connections: 5/16" x 1/4".
  • Type : Barb Hose Mender/Splicer Reducer. Adapter for connecting a hose to a hose threaded connection of a different diameter.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Temperatures range from -40 to 160 F. 150 PSI maximum working pressure.
Check Stock

Quickun Brass Hose Barb Reducer 3/8 to 1/2 Barbed Reducer Fitting Reducing Splicer Mender Union Adapter for Air Water Fuel Pack of 3

  • Material: Brass. Connections size: 1/2" x 3/8".
  • Type : Barb Hose Mender/Splicer Reducer. Adapter for connecting a hose to a hose threaded connection of a different diameter.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Temperatures range from -40 to 160 F. 150 PSI maximum working pressure.
Check Stock

Joywayus 3/8\ ID Hose Barb Fitting Hex Union Brass Fitting Water/Fuel/Air (Pack of 5)

  • 【Material】Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability..
  • 【Maximum Pressure】0~150Psi【Working Temperature】-40～160°F..
  • 【Packaging Includes】5 Brass Hose Mender with barb 3/8" x 3/8"..
  • 【Connections】Hose Splicer for connecting two hoses with the same diameter in a straight run..
  • 【Typical Application】Temperature control circuits, pneumatic circuits, vacuum and fluid systems test apparatus, lubricant, coolant lines..
Check Stock