Reviews Hose Fitting

Brass Barb Union Fittings LIONMAX Barb Splicer Mender Hose Fittings 4 PCS 1/4 Inch to 1/4 Inch Barb Hose ID with 8 Hose Clamps for Air/Water/Fuel/Oil

  • 【SOLID BRASS MATERIAL】Barb fitting is made of brass. Strong and durable, not easy to rust and corrode. Has a long service life. NOTE: Brass barb hose fitting is not suitable for potable water..
  • 【-65~250°F 150PSI】Hose barb fitting has strong temperature resistance and good pressure resistance. So barb union splicer fitting is often used for water, fuel, oil delivery..
  • 【PACKAGE CONTAINS】1/4'' hose ID barb fitting (4 PCS) + 304 stainless steel hose clamp (8 PCS). You don't need to buy additional accessories..
  • 【TIGHT CONNECTION】1/4 inch ID hose barb fitting is smooth overall without burrs. Size meets the standard. The strong barb and hose clamps make the barbed hose splicer not easy to leak during the connection process..
  • 【WIDE APPLICATION】Brass barb hose fitting is suitable for pipe repair. Various hoses can be connected to 1/4'' hose ID hose barb fittings. Meet your multiple needs..
Check Stock

Brass Barb Reducer Fittings LIONMAX 1 to 3/4 Barb Hose ID Hose Barb Splicer Mender with 4 Hose Clamps for Air/Water/Fuel 2 PCS

  • 【WITH HOSE CLAMPS】1'' to 3/4'' Hose barb reducer is suitable for connecting 1 inch ID hose to 3/4 inch ID hose. The package contains barb splicer reducer 2 PCS and 304 stainless steel hose clamp 4 PCS (size can adjust). You don't need to buy additional accessories..
  • 【-65~250°F 150PSI】Brass barb reducer fitting has strong temperature resistance and good pressure resistance. So barb hose reducer is often used for water, fuel, oil delivery..
  • 【SOLID BRASS MATERIAL】Barb splicer reducer is made of brass. Strong and durable, not easy to rust and corrode. Hose barb fitting has a long service life. NOTE: Brass barb reducer fitting is not suitable for potable water..
  • 【WIDE APPLICATION】Barb hose reducer is suitable for pipe repair. Various hoses can be connected to this 1 inch to 3/4 inch ID hose barb fitting. Meet your multiple needs..
  • 【TIGHT CONNECTION】This brass barb reducer is smooth overall without burrs. Size meets the standard. The strong barb and hose clamps make the barbed splicer reducer fitting not easy to leak during the connection process..
Check Stock

Brass Barb T Fittings LIONMAX 3 Way Union Barb Tee Fitting 3/16 x 3/16 x 3/16 ID Hose Barb 3 PCS for Water/Fuel/Air

  • 【SOLID BRASS MATERIAL】3/16'' × 3/16'' × 3/16'' ID Hose barb tee fitting is made of brass. Strong and durable, not easy to rust and corrode. NOTE: Brass barb tee fitting is not suitable for potable water..
  • 【-65~250°F 150PSI】Brass barb 3 way union fitting has strong temperature resistance and good pressure resistance. So barb T fitting is often used for water, fuel, oil delivery..
  • 【SPECIFICATION】3/16'' ID Hose barb tee fitting is suitable for 3/16 inch ID hose. The package contains brass barb tee 3 PCS..
  • 【WIDE APPLICATION】Barb tee is suitable for pipe repair. Various hoses can be connected to this 3/16 inch ID hose barb tee fitting. Meet your multiple needs..
  • 【TIGHT CONNECTION】This hose barbed T fitting is smooth overall without burrs. Size meets the standard. The strong barb make the 3 way union fitting not easy to leak during the connection process..
Check Stock

Class A Customs 13 Gallon Water Tank & Plumbing Kit T-1300-BPK

  • ...Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • 13 GALLON TANK MEASUREMENTS 21” x 9” x 16”- Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adapter (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adapter (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adapter (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.
Check Stock

POWERTEC 70175 Dust Collection Hose with Fittings Plus Two Reducers , Black

  • ...to connect your shop vac or 2-1/2” dust collection system to a 1-1/2” tool port, an additional 1-1/2” screw on adapter, Powertec 70296, is available. Simply remove the 1”ID adapter and replace it with the additional 1-1/2” ID adapter.
  • INCLUDES: (ONE) 10ft dust collection hose, (ONE) 1" pliable plastic hose fitting, (ONE) 1-1/2" pliable plastic hose fitting, (ONE) 2-1/4" ABS dust hose adapter, and (ONE) 2-1/2" ABS dust hose adapter.
  • APPLICATION: Allows you to extend the reach of your shop vacuum or dust collecting power tools with a long, flexible and premium quality vacuum hose that is free roaming and able to suck up dust, dirt and debris.
  • VERSATILE: Offers a dust collection power tool hose with fittings that work with most small vacuums, shop dust collection systems, orbital sanders, joiners, jigs and other power tools. The nominal 2-1/4” adapter should fit most shop vac ports with a nominal ID of 2-1/4”. Shop Vac ports sizes can vary between different manufacturers. Please refer to the actual adapter sizes before ordering, to verify that it will work for your application.
  • DIMENSIONS: Dust collector hose 1-3/16" O.D x 10ft long | ABS vacuum dust hose adapter nominal 2-1/2" O.D actual 2-27/64”| ABS vacuum dust hose adapter nominal 2-1/4"....
Check Stock

Class A Customs | T-1000-BPK| 10 Gallon Fresh Water Tank & Plumbing Kit RV Concession

  • 10 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 19” Longest Length (not including fittings) x 9” x 14” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thre....
Check Stock

Class A Customs | T-2100-BPK| 21 Gallon Fresh Water Tank & Plumbing Kit RV Concession

  • 21 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 34” Longest Length (not including fittings) x 9” x 16” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thre....
Check Stock

Class A Customs | T-4000-BPK| 40 Gallon Fresh Water Tank & Plumbing Kit RV Concession

  • 40 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 39 1/2” Longest Length (not including fittings) x 13” x 18” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe....
Check Stock

Class A Customs | T-3000-BPK| 30 Gallon Fresh Water Tank & Plumbing Kit RV Concession

  • 30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 34 1/2” Longest Length (not including fittings) x 12” x 17 1/2” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male ....
Check Stock

Boltigen Pressure Washer Swivel Fitting, Anti Twist 3/8 NPT Male to Female Stainless Steel Connector Joint, 360 Degree Kink Free Swivel Fitting (3/8 NPT Male to 3/8 NPT Female-1Pc)

  • 【Swivel Fitting】 Kink free Swivel Joint for pressure washer with 3/8'' NPT male and female thread fitting，connects hose to hose or gun to hose..
  • 【Smart Design】 Pressure washer swivel joint with 360 degree rotation, eliminates twists and kinks on working, reduces stress on not only hose and gun, but also operator..
  • 【High Working Pressure】 Working pressure of washer gun fitting is up to 4500 PSI and working temperature is up to 250 °F, suitable for hot and cold water. Pressure washer fitting is made of high quality stainless steel, resistance to corrosion and long life using. Max Flow Rate: 30.0 GPM..
  • 【Application】 Suitable for connect swivel fitting between gun and hose, Swivel fitting rotates freely, reduces the strain on your wrist when using the pressure washer..
  • 【Quality Warranty】 The stainless steel pressure washer swivel joint for your pressure washer gun and hose. We did 100% inspection before goods leave our factory, if you have any problem with these products, we will 100% refund to you or replace a new set for you..
Check Stock

Class A Customs | Under Mount 20 Gallon RV Concession Fresh and Gray Water Holding Tank & Plumbing Kit UM-2000-BPK

  • 20 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 48” Longest Length (not including fittings) x 8.5” x 13” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Th....
Check Stock

Class A Customs | Under Mount 30 Gallon RV Concession Fresh and Gray Water Holding Tank & Plumbing Kit | UM-3000-BPK

  • 30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 48” Longest Length (not including fittings) x 8.5” x 20.5” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES: (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5”....
Check Stock

RIDGE WASHER Pressure Washer Gun with Extension Wand for Hot and Cold Water, Power Washer Gun with M22 Fitting, 5 Nozzle Tips, 40 Inch, 4000 PSI

  • Power washer gun is designed for hot and cold water in gas and electric pressure washer. Max Temperature for water is up to 100℃ ( 212°F ). Max Flow Rate is up to 5.3 GPM. Max Pressure is up to 4000 PSI..
  • This pressure washer wand fits pressure washer hose with M22 14mm or M22 15mm fitting. Generac, Ryobi, Briggs Stratton, Craftsman, Simpson, Karcher pressure washer hose has M22 14mm fitting. Sun Joe, Excell, MI-T-M, Stanley, Campbell, AR Blue, Cleanforce, Simoniz power washer hose has M22 15mm fitting. Please connect power washer wand to the hose directly if your hose has M22 14mm fitting. Please connect brass coupler between wand and hose if your hose has M22 15mm fitting..
  • The length of pressure washer handle is adjustable. Easy to change the length based on the purpose of cleaning. There are three length, 40 inch, 24 inch, 9 inch..
  • 5 spray nozzles have different spray angle (0, 15, 25, 40, 65 degree). Choose suitable nozzle based on the purpose of cleaning. Such as watering flowers or plants, washing car, fence or roof. Universal 1/4’’ quick connector is also designed for turbo nozzle, surface cleaner, water broom, undercarriage cleaner, pivoting coupler, foam cannon, pressure washer sandblasting kit, gutter cleaner attachment..
Check Stock