Reviews Hose Crimp Machine

Tool Daily Sewer Jetter Kit for Pressure Washer, 50 FT Hose, 1/4 Inch NPT, Corner, Rotating and Button Nose Sewer Jetting Nozzle, 3600 PSI

  • ...ment and cover. Inner tube is made of thermoplastic polyester. Reinforcement layer is 1/4" high tenacity polyester textile braid which is chemically bonded. Cover layer is made of thermoplastic polyurethane, which can resist weather, oil, abrasion and ozone. Jetter sewer hose is ISO 9001 Certified and pin test each crimp to confirm proper internal crimp. Bend radius of the hose is 4.3 inch..
  • Corner Sewer Jetter Nozzle: 1 water sideways that clears blockages at the corner. 3 rear jets at 33° flush out debris loosened by the front jet. Orifice 4.0. Side port to blast at corners where hose cannot navigate. Ideal for cleaning around the corner..
  • Button Nose Sewer Jet Nozzle: 1 front jet at 0° that clears blockages. 3 rear jets at 33° flush out debris loosened by the front jet. Orifice 4.0.
  • Rotating Sewer Jetter Nozzle: 3 backward rotating blasts into the clogged pipe and moves the nozzle through the pipe. At the meantime, it provides an even cleaning and flushes out debris. It is easy to slide into sewer lines and drain pipes. Used for flushing debris or cleaning fixed pipes when connect to a sewer jetter hose. Orifice 4.5..
Check Stock

Tool Daily Sewer Jetter Kit for Pressure Washer, 100 FT Hose, 1/4 Inch NPT, Corner, Rotating and Button Nose Sewer Jetting Nozzle, 4400 PSI

  • ...nd cover. Inner tube is made of thermoplastic polyester. Reinforcement layer is 1/4″ high tenacity polyester textile braid which is chemically bonded. Cover layer is made of thermoplastic polyurethane, which can resist weather, oil, abrasion and ozone. Jetter sewer hose is ISO 9001 Certified and pin test each crimp to confirm proper internal crimp. Bend radius of the hose is 4.3 inch..
  • Corner Sewer Jetter Nozzle: 1 water sideways that clears blockages at the corner. 3 rear jets at 33° flush out debris loosened by the front jet. Orifice 4.0. Side port to blast at corners where hose cannot navigate. Ideal for cleaning around the corner..
  • Button Nose Sewer Jet Nozzle: 1 front jet at 0° that clears blockages. 3 rear jets at 33° flush out debris loosened by the front jet. Orifice 4.0.
  • Rotating Sewer Jetter Nozzle: 3 backward rotating blasts into the clogged pipe and moves the nozzle through the pipe. At the meantime, it provides an even cleaning and flushes out debris. It is easy to slide into sewer lines and drain pipes. Used for flushing debris or cleaning fixed pipes when connect to a sewer jetter hose. Orifice 4.5..
Check Stock

LOKMAN Stainless Steel Single Ear Hose Clamp 80Pcs 6-23.6mm Crimp Hose Clamp Assortment Kit Ear Stepless Cinch Rings Crimp Pinch Fitting Tools 1/4 inch - 15/16 inch

  • Heavy duty 304 stainless steel - LOKMAN crimp hose clamps are salt resistant, corrosion-resistant. Can be applied in the complex environment..
  • 360 ° seal protection - without any steps or gaps in the crimp clamp, inner circumference assurance the hose uniform surface compression..
  • Package Quantity - 80pcs LOKMAN single ear pinch hose clamps with 9 sizes range. Scope of 1/4'' ~ 15/16'' ( 6mm-23.5mm). Organized within a convenient plastic storage case..
  • Narrow ear - Lock forces concentrated. Specially formed strip edges reduce the risk of damage to the part being clamped..
  • Please note - The size of the clamp denotes the inner dimension (id) of the Clamp..
Check Stock

Brass Hose Barb 90 Degree Elbow Fitting 5/16 Barbed x 5/16 Barbed Pack of 5

  • 90-degree elbow for connecting 5/16" barb hose to hose at an angle.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Barbed fitting creates a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (sold separately).
  • All kinds of size, we can also provide customized order production solutions,including oem..
Check Stock

Wokape 50Pcs 10.3-12.8mm Single Ear Hose Clamps, 304 Stainless Steel PEX Pinch Clamps Cinch Rings Crimping Tool Stepless Hose Clamp for Securing Pipe Hoses and Automotive

  • ...he quantity can meet almost your needs..
  • ❥Special Cochlear Design---- Special cochlear design provides a strong thermal expansion compensation function, which compensates for the dimensional change caused by the change of the hose. The design ensures that the clamps can continuous clamp during temperature changes, machine variations, or dimensional changes. The pipe is always in good sealing and fastening status..
  • ❥Seal Protection----- These hose clams can provide a fast and reliable connection for pipes, and form a 360 degree watertight seal. The clamp concentrates seal compression, and inner circumference assurance the hose uniform surface compression,the clamping effect is obvious and stronger. The edge of all clamps are polished smooth, and they will not damage the hose. The clamps don't have inner protrusion and narrow band, can provide a more centralized seal pressure..
  • ❥High Quality-------- These hose clamps are made of high quality 304 stainless steel. The hose clamps are more salt-resistant, antirust, anti-corrosion, waterproof nad oil proof. They has good corrosion resistance, heat resistance, low-temperature strength, and mechanical properties. The solid and sturdy material let the hose calmps last longer time for use and will not rust ....
Check Stock

Anderson Metals Brass Garden Hose Fitting Connector 1/2 Barb x 3/4 Male Hose

  • Hose Clamp, Ferrule or Crimp Sleeve not included.
  • Connects a hose on one end and a female GHT threaded connector on the other.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Barb size is based on Hose Inside Diameter.
  • Male garden hose threads are all 3/4" with an outside diameter of 1.0625 and 11-1/2” threads per inch..
Check Stock

Anderson Metals-07003-0808 Brass Hose Fitting Swivel Connector 1/2 Barb x 1/2 Male Pipe

  • Connects low-pressure hose to threaded pipe with a ball swivel for an adjustable angle.
  • Fitting connects to hose on one end and has an NPT male connector on the other.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Barbed fitting creates a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (sold separately).
Check Stock

Hose Clamps 304 Stainless Steel Single Ear Hose Clamp, 125Pcs (7-25.6mm) Crimp Pipe Clamps Assortment Kit 9 Sizes Ear Stepless Cinch Rings Crimp Pinch Fitting Tools (125Pcs with Pliers)

  • ...The single ear hose clamp is made of premium raw material 304 stainless steel and has good corrosion resistance, heat resistance, low temperature strength and mechanical properties. The hose clamp stainless steel 304 has good workability such as stamping and bending, and no heat treatment hardening phenomenon. This crimp clamp can be used for a long time..
  • 360° STEPLESS DESIGN- No bulge and gap in the inner ring of the stainless steel hose clamps. Narrow band design provides more concentrated sealing pressure. The special treatment of the edge of the clamp reduces the possibility of damage to the clamped parts. This ear clamp is light weight and obvious clamping effect..
  • WIDELY USED- Standard series of spring clamps are suitable for connection of pipe fittings.
  • Using hose clamp pliers can perfectly connect the pipe to the any brand of crimp pipe fittings or tubing..
  • SHARP PLIERS- The small head design allows for good access in a limited area without damaging the pressure points on the ear clamp. The hose clamp plier is sharp but won't damage, rubber handle grips for a sure hold the clamp. Great length on handles, strong and well built..
  • ONE-STOP SERVICE- High-quality, high stability. If you have any issues at all with this product, our customer support ....
Check Stock

Dixon Valve & Coupling BM6 Brass Hose Fitting, Mender, 3/4\ Hose ID Barbed

  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Barbed fitting for a tight seal on hoses.
  • For use with a hose clamp, crimp sleeve, or ferrule (sold separately).
Check Stock

M MINGLE 150 Feet Sewer Jetter Kit for Pressure Washer, 1/4 Inch NPT, Drain Cleaning Hose, Button Nose, and Rotating Sewer Jetting Nozzle, Orifice 4.0, 4.5, 3600 PSI

  • ...nd reinforcement. The inner tube is made of thermoplastic polyester. The cover layer is made of thermoplastic polyurethane, which can resist oil, weather, ozone, and abrasion. The reinforcement layer is a 1/4" high tenacity polyester textile braid, which is chemically bonded. It is ISO 9001 Certified. Pin test each crimp to check the proper internal crimp..
  • 【Button nose sewer jetter nozzle】1 front jet at 0° angle can clear blockages. 3 rear jets at a 33° angle can flush out debris loosened by the front jet. The orifice is 4.0..
  • 【Rotating sewer jet nozzle】3 backward rotating blasts into the clogged pipe and move the nozzle through the pipe. The nozzle is easy to slide into drain pipes and sewer lines. It offers an even cleaning and flushes out debris. The orifice is 4.5..
  • 【Widely Application】The sewer jetter hose can connect to the pressure washer pump with an M22 coupler (female M22 to female 1/4’’ NPT). It can also connect to a pressure washer wand or trigger gun with a 1/4’’ quick disconnect plug. The sewer jetter hose connects to the sewer nozzle with a solid end. The other end is a swivel which releases stress between the sewer hose and gun/pressure washer outlet..
Check Stock

Beduan Stainless Steel 1/4 Hose Barb 3 Way Y Shaped Union Home Brew Fitting

  • Material: Made of 304 stainless steel, corrosion resistant ductility at high temperatures, and low magnetic permeability..
  • Size: 1/4”Barb x 1/4”Barb x 1/4”Barb.
  • Barbed fitting creates a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (sold separately)..
  • Hose fittings are used in systems such as beer brewing, air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation..
Check Stock

Supplying Demand 41025 Clothes Dryer 5 Foot Braided Stainless Steel Steam Hose Installation Kit with Elbow

  • Hose measures 5 ft with the 90 degree angle to allow for closer installation to the wall 60-inch X 3/4-inch FHT x 3/4-inch FHT fill hose.
  • This braided stainless steel will ease peace of mind instead of basic rubber hoses.
  • 3 piece set - Includes 5ft Hose, 1 Ft hose, and Y connetor..
  • This steam dryer installation kit comes with all the components needed to install your new steam dryer or update your existing one with newer stronger....
Check Stock

OTC 4723 Stinger Ear-Type CV Boot Clamp Plier

  • OTC's Ear Type CV Boot Clamp Pliers are designed to crimp the ear-type CV boot clamps used on most Cars, Trucks, SUV's, Vans and off-road vehicles that use CV boots.
  • May also be used to crimp the type of clamps used on fuel and cooling system hoses.
  • Ensures even, precise crimping for a tight, leak-proof seal.
  • Using the correct tool reduces the possibility of damage to the clamp, boot, or hose.
  • High-grade materials ensure quality performance over the lifetime of the tool.
Check Stock