Reviews Hose Barbs With Lock Ring
Tool Daily Compatible Chemical Injector Set for Pressure Washer, Replacement for Briggs and Stratton 190593GS 190635GS 203640GS
- Pressure Washer Soap Injector Kit, compatible Briggs & Stratton Pump 190593GS, 190635GS and 203640GS. Please identify the part number of pressure washer pump, then check if it fits your pressure washer..
- How to replace: Follow soap hose to end and you’ll find injector. Take off soap hose. Use wrench to remove old injector. Clean out any gunk or dried soap in receptacle. Make sure rubber o ring is on injector as pictured. Put ball bearing inside injector and then the spring with small end of spring against the ball bearing. Insert injector into receptacle and tighten injector with 13mm wrench. Don’t overtighten, you’ll break the o ring or crack white metal on pump. Put the soap hose back on..
- If the part on your pressure washer part is worn-out, rusted or hard-water-deposit clogged, you can replace it with this set..
- Package List: Two Chemical Injector Sets, including 2 Brass Barbs, 2 Check Valve Balls, 2 Springs, 4 O-Rings..
Check StockYuanTenhwy 3 PCS 3/8 10mm Brass Hose Barb Tee Fittings With 9 PCS Stainless Steel Clamps For Air/Water Hose Splicer 3-Way-T…
- 【Size】: The outer diameter of Hose barb fitting is 3/8 inch (10mm).
- 【Packing list】: 3 PCS of 3-way(Type T) Hose barbs fitting with 9 PCS of stainless steel hose clamp.
- 【Material】: The hose barbs fitting is made of brass, and the hose clamp is made of stainless steel.
- 【Features】: corrosion resistance, dimensions in line with standards, and overall smooth without burrs.
- The solid barb and hose clamp ensure that the hose and the Hose barb fittings are well sealed during connection, and are not easy to leak.
- 【Application Scenarios】:It is applicable to pipeline installation and maintenance, and is often used to assist in the transportation of gas, water or oil. However, federal laws do not allow the installation of these fittings for drinking water in the United States and its territories..
Check StockPlastic Quick Connect Male/Female Coupling Connector 3/16'' Hose Barb Insert 3 Set/Pack
- Quick-Disconnect Fittings, Straight-Through Hose barbs.
- Suitable for 4mm-5mm Inner Diameter Tube.
- Subject Material: POM Sealing ring material: EDPM.
- Suiltable for a wide variety of applications in pharmaceutical, food and beverage, labaratory, chemical.
Check Stock280 Pcs Barbed Connectors Irrigation Fittings Kit,Drip Irrigation Barbed Connectors 1/4 Tubing Fittings Kit for Flower Pot Garden Lawn Straight Barbs,Single Barbs,Tees,Elbows,End Plug,4-Way Coupling
- Easy to storage and install: These irrigation kits have a box, convenient and will not leak easily,just push the tubing firmly over the barbs for a tight fit, they don‘t need others tools. Please put these drip irrigation accessories in 70-80 ° water for 10 seconds before assembly, the tube will remain tight after cooling.
- Large quantities: 280 matching kits total, Hose Elbows Fittings (25pcs), Barbed Hose End Plug (25pcs), Oblique Barbed 4-way Connector (25pcs), Single barbs (30pcs), Straight Barbs (100pcs), Oblique Barbed Tees (75pcs).
- High-quality materials: These irrigation fittings are made of high-quality plastics, safe and non-toxic, with strong pressure resistance, durability and corrosion resistance, lightness and wear resistance, can maintain you for a long time and have a long service life..
- Widely used: These drip irrigation accessories connectors are ideal for vegetable gardens, flower beds, elevated garden beds, lawns, gardens, vineyards, forest gardens, farm, residential, greenhouse gardening, and agricultural irrigation applications, with strong practicability for you.
- Note: Please confirm your size before purchasing. These irrigation kits are designed with barbs and can be used to connect 1/4 inch drip irrigation pipes. Please check....
Check Stock204Pcs Barbed Connectors Irrigation Fittings Kit,Drip Irrigation Barbed Connectors 1/4 Tubing Fittings Kit for Flower Pot Garden Lawn Straight Barbs,Single Barbs,Tees,Elbows,End Plug,4-Way Coupling
- Easy to storage and install: These irrigation kits have a box, convenient and will not leak easily,just push the tubing firmly over the barbs for a tight fit, they don‘t need others tools. Please put these drip irrigation accessories in 70-80 ° water for 10 seconds before assembly, the tube will remain tight after cooling.
- Large quantities: 204 matching kits total, Spray (14 pcs), Micro Drip (12pcs), Tees (50pcs), Drip Emitter (18pcs), Oblique Barbed 4-way Connector (10pcs), Barbed Hose End Plug (20pcs), Hose Elbows Fittings (20pcs), Single barbs (20pcs), Straight Barbs (40pcs).
- High-quality materials: These irrigation fittings are made of high-quality plastics, safe and non-toxic, with strong pressure resistance, durability and corrosion resistance, lightness and wear resistance, can maintain you for a long time and have a long service life..
- Widely used: These drip irrigation accessories connectors are ideal for vegetable gardens, flower beds, elevated garden beds, lawns, gardens, vineyards, forest gardens, farm, residential, greenhouse gardening, and agricultural irrigation applications, with strong practicability for you.
- Note: Please confirm your size before purchasing. These irrigation kits are designed with barbs and can be used to connect 1/....
Check StockFive Oceans FO4277 Brass Fuel Hose Barb 1/4 inches NPT Thread x 3/8 inches Hose, Crafted for Fuel Systems, Sharp-Edged Barbs, For Any Portable Tank
- This Five Oceans Fuel line connector can be installed with confidence using our pipe-to-hose fittings..
- Perfectly crafted for fuel systems, these pipe hose fittings are the ideal use for any portable tank..
- This machined brass fitting features a male 1/4 inches NPT thread and sharp-edged barbs for 3/8 inches hose to provide excellent grip. Brass construction resists corrosion..
- Barbs provide excellent gripping power for fuel line connections.
- We recommend the use of fuel compatible thread sealant to prevent galling and provide the best possible connection.. FIVE OCEANS, 40 YEARS developing High-Quality Marine & Outdoor Products.
Check Stock【2 Pairs】MRbrew Homebrew Hose Swivel Nut Barb 1/4 Barb & 5/16 Barb Stainless Steel MFL Quick Disconnects Fittings for Brewing Keg System
- 【MATERIAL】304 Stainless Steel, rust-free, can be used for long time.
- 【1/4’’ BARB】Often used for liquid ball lock and pin lock disconnects.
- 【5/16’’ BARB】Often used for gas ball lock and pin lock disconnects.
- 【KEGGING NECESSARIES】Necessary for home or commercial brewing systems.
- 【PACKGE】4 * Swivel nuts, 2 * 1/4’’ barbs, 2 * 5/16’’ barbs.
Check StockValue Plastic SMTLL-J1A Luer Tube Fitting Threaded Adapter Male Luer Integral Lock Ring X 1/4-28 UNF Thread, Natural Kynar PVDF (pack of 25)
- Coupler with angled barbs for connecting pipes or tubing in a straight run.
- Fitting has a male luer lock on one end and a barbed connector on the other.
- Polypropylene for chemical resistance and dimensional stability.
- Luer lock with integral ring for secured, leak-free connection.
- Barb lacks parting lines, ensuring a leak-free union with tubing.
- Meets ROHS standards for quality assurance.
Check StockWallPeg Locking Pegboard Hooks - 100 pk. Flex-Lock J Style for Peg Board Tool Organizer - AM 114 B
- WallPeg Peg Hooks do not have split barbs that damage peg holes.
- WallPeg Pegboard hooks have a smooth Flex-Lock system to protect pegboards.
- Pegboard hooks have rounded safety tips and Patented Flex-Lock features.
- Black Peg hooks fit 1/4" pegboard hole size, no barbs to damage board holes.
- Easy to install, easy to move, stays in place…that’s the Flex-Lock way!.
Check StockGarden Retractable Hose Reel, Any Length Lock, 82+8 FT 5/8 Inch Automatic Rewind Wall Mounted Reel with 8 Patterns Nozzles, Brass Connector, 180° Watering & Car Washing, 82 feet, (GHR5A)
- 【Locked at Any Length & Safety Lock】When you pull the hose to a certain length, it will lock automatically, so you don't have to hold it all the time. It takes 12 to 15 seconds to retract the 82FT hose back after a gentle tug, by pressing the safety lock on the side panel you can lock the hose during its retraction, providing more safety for children and seniors..
- 【High Quality】The hose is made from new polymer, the rubber ring to connect the hose with the tape is waterproof and durable, while the metal copper connector is made of solid brass. These factors make the hose reel more durable and not easy to break..
- 【82ft Long Hose & Multiple Spray Functions】The garden hose reel is designed to be 82 feet long, coming with 8 Spray Functions (Mist, Shower, Cone, Angle, Full, Soaker, Flat, Center) for you to Choose in different usage Scenarios..
- 【High Water Pressure & 180° Rotation】With 350 PSI high pressure, you can clean car or garden faster. The robust wall bracket and the rotating shaft allow the hose reel pivot 180 degrees, bringing the water to every corner of your garden..
- 【Easy to Replace the Hose】With the double lock design and the auto rewind mechanism, you can simply replace the hose by uncovering the lid, saving your time and en....
Check StockGarden Retractable Hose Reel, Any Length Lock, 100+6.7 FT 1/2inch,Automatic Rewind Wall Mounted Reel with 8 Patterns Hose Nozzles, Brass Connector, 180Degree Garden Watering & Car Washing Generi005
- 【Locked at Any Length & Safety Lock】When you pull the hose to a certain length, it will lock automatically, so you don't have to hold it all the time. It takes 12-15 seconds to retract the 100FT hose back after a gentle tug, by pressing the safety lock on the side panel you can lock the hose during its retraction, providing more safety for children and seniors..
- 【High Quality】The hose is made from new polymer, the rubber ring to connect the hose with the tape is waterproof and durable, while the metal copper connector is made of solid brass. These factors make the hose reel more durable and not easy to break..
- 【100ft-Long Hose & Multiple Spray Functions】The garden hose reel is designed to be 100 feet long, coming with 8 Spray Functions (Mist, Shower, Cone, Angle, Full, Soaker, Flat, Center) for you to Choose in different usage Scenarios..
- 【High Water Pressure & 180° Rotation】With 350 PSI high pressure, you can clean car or garden faster. The robust wall bracket and the rotating shaft allow the hose reel pivot 180 degrees, bringing the water to every corner of your garden.
- 【Easy to Replace the Hose】With the double-lock design and the auto-rewind mechanism, you can simply replace the hose by uncovering the lid, saving your time and ene....
Check StockRain Barrel Connector Kit
- Includes two stainless steel hose clamps, one 3' long x 3/4" diameter hose, two poly hose barbs, and two 1/2" bulk head assemblies.
Check Stock190 Pcs Barbed Connectors Irrigation Fittings Kit,Drip Irrigation Barbed Connectors 1/4 Tubing Fittings Kit for Flower Pot Garden Lawn Straight Barbs,Single Barbs,Tees,Elbows,End Plug,4-Way Coupling
- Easy to storage and install: These irrigation kits have a box, convenient and will not leak easily,just push the tubing firmly over the barbs for a tight fit, they don‘t need others tools. Please put these drip irrigation accessories in 70-80 ° water for 10 seconds before assembly, the tube will remain tight after cooling.
- Large quantities: 190 matching kits total, Spray (8 pcs), Micro Drip (10pcs), Tees (40pcs), Drip Emitter (18pcs), Oblique Barbed 4-way Connector (10pcs), Support Stakes (40pcs), Barbed Hose End Plug (20pcs), Hose Elbows Fittings (20pcs), Single barbs (20pcs).
- High-quality materials: These irrigation fittings are made of high-quality plastics, safe and non-toxic, with strong pressure resistance, durability and corrosion resistance, lightness and wear resistance, can maintain you for a long time and have a long service life..
- Widely used: These drip irrigation accessories connectors are ideal for vegetable gardens, flower beds, elevated garden beds, lawns, gardens, vineyards, forest gardens, farm, residential, greenhouse gardening, and agricultural irrigation applications, with strong practicability for you.
- Note: Please confirm your size before purchasing. These irrigation kits are designed with barbs and can be used to connect 1/4....
Check Stock