Reviews Hose Assembly Air Brake

Utah Pneumatic 1/4\ Air Line Od 50 Feet SAEJ844 Air Brake Tubing Nylon Air Ride Hose DOT Approved for Air Brake System Or Fluid Transfer 1/4\ Air Hose(1/4\ air hose 50 feet)

  • Standard SAEJ844 Air suspension Horn Train Lowrider air brake tubing 1/4 air line air suspension line 1/4 pneumatic tubing air brake tube.
  • Standard SAEJ844 Air suspension Horn Train Lowrider air brake tubing 1/4 air line air suspension line 1/4 dot airline.
  • Item:PA Nylon hose. Usage:Air brake system,air or fluid transfer use with Air brake hose 1/4 dot tubing.
  • Size:1/4".Pipe Thickness 1mm Bending radius 40mm air horn tubing.
  • Weight 190Gr/10Meter.Material Polyamide air bag hose.
Check Stock

Air Powered Brake Piston Wind Back Tool Pneumatic Brake Caliper Compression Tool Brake Caliper Piston Compressor Rewind Tool Brake Pump Adjusting Tool for Auto Repair

  • ...tool creates a larger space between the caliper cavity to make room for newer and thicker brake pads..
  • Ratcheting Action: Brake piston compression tool provides 360 degree swing.
  • center located ratchet screw creates an even force when compressing the piston to ensure proper alignment and prevent damage to your brake assembly.
  • reverse movement by flipping the switch on the handle tool to retract the compression plate..
  • Easy Reset: Drain the fluids from calipers then remove the caliper and worn brake pads from your rotor assembly.
  • Retract brake caliper press plates to fit inside the caliper cavity.
  • Begin ratcheting slowly and steadily until the pistons have retracted completely.
  • Retract compression plates to remove the disc brake piston tool from the caliper cavity..
Check Stock

Beduan Union Tee 1/4\

  • 【Universal Size】Compatible with1/4" OD Tube Hose..
  • 【Push Type】Push lock union tee fitting. Designed for quick and simple installation, and compact one piece fitting assembly in tight places and for precise positioning.
  • 【High Quality】304 Stainless Steel durable material. The high-quality tee manufactured to the highest standards required for air system applications..
  • 【Good Performance】Quick construction for maximum strength and durablity. Support up to 250 PSI of air pressure..
  • 【Usage】Worked great with the air bags for truck, air brake system, hdraulic system, industrial pneumatic tools and other applications..
Check Stock

BJTDLLX Complete Rear Axle Kit with Brake Assembly & Pillow Blocks for DIY Go Kart ATV Quad Buggy Mini Bike (No Chain)

  • 【Material】The rear brake assembly kit of the kart is a high-performance aluminum cylinder with pre-installed brake fluid.
  • the brake disc is made of high-quality steel, which is durable and has a long service life..
  • 【Rear Axle Kit】length is 740 mm/29 inches, disc size is 160 mm x 4 mm/6.3 inches x 0.16 inches, T8F 58T sprocket (without chain). This is a complete rear axle kit for karts..
  • 【Rear Brake Caliper Assembly】with master cylinder and caliper, 61 inches/1550 mm brake hose length. This rear brake assembly should fit most pit bikes made in China..
  • 【Wide Range of Applications】very suitable for DIY karting projects or reconstruction. Suitable for four-wheel ATV off-road karts. Suitable for many 50cc 70cc 90cc atv quad bikes, karts, such as atomik, motowork, DHZ, LEI, etc..
  • 【Package Content】rear axle kit + brake assembly + a pair of pillows (without chain). (Package size: 30'' x 8'' x 3'', shipping weight: 12lb)..
Check Stock

Mityvac MV6830 Professional Pneumatic Air Operated One Person Brake and Clutch Bleeder; Bleeds up to 2 Quarts (1.9 Liters) Per Minute with Simple and Efficient Operation

  • The Mityvac MV6830 includes the following components: brake bleeder.
  • molded base with screws for bench mounting.
  • user manual (English/French/Spanish/German)..
  • Includes a swivel air inlet to prevent kinks in the air hose during movement and the automatic shutoff valve prevents overfilling..
  • 1.9-quart (1.8 liter) fluid collection reservoir allows the operator to perform multiple bleeding jobs without emptying..
  • Bleeds at a rate of up to two quarts (1.9 liters) per minute for increased productivity and features a variable thumb throttle to maintain desired flow rate..
  • Reservoir and lid feature large, coarse threads to reduce cross threading, and the bench-mountable, molded base keeps the unit secure while removing or replacing the lid..
Check Stock

EWK 2 Liter Pneumatic Vacuum Brake Bleeder Oil Fluid Extractor Pump

  • VACUUM BRAKE BLEEDER – Suitable For Most Standard And ABS Brake Systems, Bleeding And Flushing Hydraulic Brakes With Efficiency..
  • ONE MAN BRAKE BLEEDER KIT – Most Effective Way To Bleed The Brake Fluid. Unlike Traditional Operation, The Set Only Requires One Person To Do The Full Job!.
  • WORK ELEGANTLY – The Air Operated Brake Bleeder With A Silencer Makes A Messy Job Cleaner, Quicker And Quieter..
  • NO SPILLS, NO MESSES – The Stable Set Ensures Safe Extraction. Old Fluid Is Well Collected Without Spillage..
  • BLEED IT OUT – Air Pockets In The Braking System Lower The Braking Force. The Silicon Hose Equipped With One-Way Valve Keeps The Air From Returning Into The System When Bleeding..
Check Stock

ANRIWT Air Brake Line Fittings,1/4" DOT Air Fittings Brass Push in Fitting, Push to Connect Union Fittings, Air Brake Union 1/4" Tube OD for Trucks Trailers Use and Industria Workshops (4 PCS)

  • 【PREMIUM MATERIAL】：Our air brake fittings are made of high quality CA360 brass,Meets D.O.T FMVSS 571.106 ,SAE J1131 Air Brake system Requirements and Air Brake system Requirements,with corrosion resistance, high temperature ductility and low permeability. Great for long time use, dot air brake fitting pneumatic fittings type: 1/4" ..
  • 【EASY TO USE】: Union connect two tube with same OD. All dot air quick connect fittings can be sealed by pushing the tube firmly into the fittings and they are also simple to be removed from the tube..
  • 【TYPICAL APPLICATION】：Air brake fittings assortment kit can be used with air systems, copper tubing in air lines brake systems, which is perfect for automotive car or truck repair,air operated seats, operating gauges, air horns, industrial workshops, air brake connections,towing machine hose connection and air brake connections or lawn mower repair..
  • 【PRESSURE RANGE】: Air brake fittings working pressure from vacuum to 250 psi. Temperature Range: -40° F to +200° F（-40°C to +93°C）(Note: see tubing manufacturer’s recommendations for pressure and temperature mut....
Check Stock

FOUR UNCLES 2L Vacuum Brake Bleeder Air Brake Bleeder Kit with 2L Brake Fluid Extractor and 1L Refilling Bottle

  • 【One Person Operation】This brake bleeder bleeds and flushes hydraulic brakes and clutches with a vacuum and is simple to use. Large capacity collection reservoir can contain 2 liters of fluid, also includes an automatic master cylinder refill kit with a 1 liter reservoir (safety cup), which makes changing brake oil easy and simple for one man operation..
  • 【2 Silicon Bleed Hoses】The brake oil bleeder kit includes a 40 inch silicone bleed hose with a universal rubber adapter that used with most standard and ABS brake systems, and a 40 inch master cylinder evacuation hose especially for bleeding brake in master cylinder..
  • 【Efficiently to Bleeding Work】It contains a variable thumb throttle which maintains average air flow rate 2 cfm and a desired brake fluid flow rate. And the fixing ring lock keeps extracting oil continuously, efficiently and quicker..
  • 【Quieter Work】 Built-in Integrated silencer allows the brake fluid to flow quietly through the silicone hose and makes a messy job cleaner, quicker and quieter..
  • 【Convenient & After Sales】Midget size of the N.W is less than 1 kg makes it easy and convenient to operate and carry even for women. And If there is some problem with our products while you receive it, pls feel free to contact us, ....
Check Stock

Orion Motor Tech Brake Bleeder, Pneumatic Brake Fluid Bleeder Kit with 8 Master Cylinder Adapters, 1L Vacuum Brake Bleeder for Solo Brake Fluid Replacement, Brake Fluid Bleeder Kit

  • EASY ONE-PERSON OPERATION: This pneumatic brake bleeder kit from Orion Motor Tech uses 90-120 psi of compressed air to quickly bleed old fluid and air from your brake lines into its 1.2 quart reservoir without need for an extra pair of helping hands or feet.
  • HANDS-FREE CONVENIENCE: The trigger lock allows continuous extraction of brake fluid.
  • the 5' transparent hose lets you easily and accurately inspect the old fluid during the draining process.
  • and the hangers permit out-of-the-way operation as you work.
  • SUPERIOR DURABILITY: The main polyethylene body and the silicone bleeding hose are both highly resistant to heat, wear, and chemical corrosion for a long service life.
  • COMPLETE COMPATIBILITY: Four sizes of reservoir adapters come equipped to fit master cylinders on most vehicles—including cars, motorcycles, trucks, SUVs, and more, while the American and European-style adapters ensure compatibility with almost any standard air compressors.
  • 1 YEAR WARRANTY: Order this reliable brake bleeder kit with your peace of mind assured thanks to Orion Motor Tech's usual strong warranty and friendly 24/7 customer service.
  • order today at no risk and enjoy hassle-free brake service for years to come!.
Check Stock

Mission Automotive 16oz Brake Bleeding Kit - Easy Use One Person Brake Fluid Bleeder with Magnet Mount and Hanging Lanyard - for Car and Motorcycles Brake Systems 16oz Fluid Capacity

  • Brake Bleeding Made Easy! Our brake bleeder kit has been designed to make brake maintenance as easy as possible and help you get the job done from your garage without making excess mess..
  • How It Works: It couldn't be easier to use! Just attach the valve on out 12" brake bleeder hose to your brake system open the valve and pump a few times on the brake until the fluid hose is full with no air bubbles.
  • Includes Magnet Mount And Hanging Lanyard: No need to hold the bottle, Just attach to a magnetic metal surface OR use the lanyard to secure the bottle in an upright position to capture the brake fluid..
  • High Quality & Durable: Our brake bleeder kit is manufactured from durable oil resistant plastics with a flexible 12'' fluid tube and extra strong magnet..
  • For Use With All Brake Systems: Easy to use with all types of brake systems including cars, motorcycles, ATVs, dirt bikes, scooters,.
Check Stock

Allstar ALL42151 Black 3" x 10' Brake Duct Hose

  • Brake duct hose measures 3 inch diameter x 10 feet long.
  • Hose is flexible, features a non-kink design, and directs air from the front ducts to the spindle ducts.
  • Made from a black 3 inch double-ply neoprene-coated woven fiberglass hose with a spring steel inner and external fiberglass supports.
  • Features a smooth inner wall for unrestricted air flow.
Check Stock

Rear Hand Hydraulic Disc Brake Left Hydraulic Brake Master Caliper Assembly Compatible for Chinese Taotao Roketa Sunl 50cc 90cc 110ccc 125cc Go-Kart Dune Buggy Quad ATV Dirt Mini Bike Kinroad 1

  • [Fitment]The brake master caliper assembly compatible for Most Chinese 50cc 90cc 110cc 125cc 150cc 200cc Baja Roketa Taotao Sunl ATV Dirt Bike..
  • [Fit Models]This mini bike hydraulic brake fit models: 50cc, 70cc 90cc 110cc 125cc ATVs..
  • [Size]The brake master caliper assembly mounting Hole:7/8 inch /22mm, caliper distance between hole to hole: 2.5in/63mm, dimension brake hose length:....
  • [Package Include]Package include:1 x rear hydraulic disc brake system caliper..
Check Stock

ABN Pneumatic Vacuum Brake and Clutch Bleeder Kit, 0.75 Liter – Master Cylinder 90–120 PSI Air Pressure Fluid Bleed Tool

  • QUICK BRAKE BLEEDING: The ABN Pneumatic Vacuum Brake and Clutch Bleeder Kit, 0.75 Liter – Master Cylinder 90–120 PSI Air Pressure Fluid Bleed Tool works with your air compressor to quickly bleed those stubborn brake lines.
  • Easier to use and less messy than an inconvenient hand pump.
  • EASY TO USE: Select a fill bottle adaptor for the master cylinder to hold it in place, fill the bottle with fluid, pop it on the master cylinder and open the valve.
  • Once the master cylinder is filled, the bottle flow will stop so you can connect the vacuum jar to an air compressor (not included), connect the bleed hose to the brake bleeder and open bleeder, then pull trigger on jar and lock in place, let it draw for 4-5 minutes, close bleeder, and check brake pedal pressure.
  • ONE-PERSON JOB: Innovative bleeder design allows you to fully complete the job by yourself.
  • WORKS FOR YOUR VEHICLE: For use on motorcycle, car, and truck.
  • 90 to 120 PSI (6-8 bar) air supply requirement.
  • 25-ounce (0.75L) approximate refill container capacity.
  • Includes different adapter sizes to accurately fit your application.
  • CONTENTS: Package includes a brake and clutch bleeder, refill container, and plastic adapters.
Check Stock