Reviews Honda 3hp Outboards

Poseidon Marine Oil Filter for Yanmar 1GM 2GM 3GM 3JH 2QM15 2YM 3YM RO 119305-35151

  • Easy to remove old filter and install the clean, new filter..
  • Replace the filter once each season or as your owner's manual recommends based on engine use..
  • 20 micron filter element providing superior engine protection..
  • For use on select 2000-2018 9.9-115 HP Yamaha, Honda, and Nissan/Tohatsu Outboards. Verify fitment using your engine model number and serial number..
  • Replaces Honda 15400-PRB-007, 15400-ZW4-003.
  • Yamaha 5GH-13440-00-00, 5GH-13440-10-00, 5GH-13440-30-00, 5GH-13440-70-00.
Check Stock

Honda Outboard, 2002 - 2008 Repair and Tune-Up Manual

  • SELOC SERVICE MANUAL HONDA OUTBOARDS 2002-2008.
  • 05/27/2023 (Publication Date) - SELOC PUBLISHING (Publisher).
Check Stock

1-1/16

  • Includes a 9/16 Garboard / Drain Plug Socket wrench for easy removal.
  • Made of non-corrosive durable glass reinforced plastic material ~ This tool is great to keep on-board for emergencies or for routine maintenance ~ Not recommended for extended use.
  • Color: Yellow ~ Quantity: 1 Wrench ~ Made in USA.
  • Aftermarket part that Fits: Mercruiser Alpha / Mariner / Mariner Mercury / Force V4 & V6 / Honda Outboards BF75-BF130 / OMC Cobra / Volvo Penta SX / May fit other Makes/Models that have a 1-1/16 " prop nut.
Check Stock

UanofCn 06193ZV7020 Water Pump Impeller Service Kit for Honda Marine Outboard 25 and 30 HP 4 Stroke Motors Cooling Replace 06193-ZV7-020 06193-ZV7-010

  • Water pump rebuild repair impeller kit for Honda Marine 25HP 30HP outboards.
  • Fit Honda marine motors 4-Stroke BF25A BF25D BF30A BF30D water cooling system all years.
  • OEMpart numbers 06193-ZV7-020, 06193-ZV7-010.
  • Please contact us with your serial number or horsepower if you are not sure if this part is correct for your engine.
  • The kit shipped from USA, Guaranteed Timeliness.
Check Stock

Invincible Marine Large Motor Flusher, Rectangular Rubber

  • Made using the highest quality components.
  • The most trusted name in marine accessories and equipment.
  • Designed to fit larger outboards with larger water intake..
  • Flushes your engine after every trip with this easy to use motor flusher.
  • Simply attach to your garden hose, slide over your lower units water intake, and turn on the water.
  • This flusher fits most Johnson/Evinrude, Mercury, Yamaha, Chrysler, Force, Honda, Nissan, Suzuki, and Tohatsu.
Check Stock

BBH Marine Boat 300HP Hydraulic Outboard Steering System Kit with Hydraulic Cylinder, Helm Pump and Tubing

  • Compatible with such brands as Yamaha, Suzuki, Honda, Mercury, Nissan, Tohatsu and more..
  • Universal design for outboards up to 300 horsepower..
  • Aluminum alloy casing and stainless steel ensure the wear resistance and corrosion resistance..
  • Replaceable parts with user-friendly design. Easy to install..
  • High strength reusable nylon hoses are equipped with quick-fit 1/4 pipe fitting..
Check Stock

Winibo ZA0301 Marine Outboard Hydraulic Steering System for Boats with Helm Pump, Hydraulic Cylinder and Tubing

  • Make your boat steer better than new! Helm Mounted Hydraulic Steering systems for Boats.
  • Universally Designed for outboards rated up to 90 total Horsepower!.
  • Compatible with such brands as Yamaha, Suzuki, Honda, Mercury, Nissan, Tohatsu and more!.
  • Our kit is made of high quality stainless steel and Aluminum alloy for years of trouble free use!.
  • 24 Foot of quality Hydraulic hose, Top mounted pump, and a ¾” tapered steering wheel shaft, guarantee a professional installation on most boats!.
Check Stock

Winibo ZA0300 Boat Hydraulic Steering System For Outboard up to 150HP With Helm Steering Ram, Cylinder, Tube kits

  • Helm Mounted Hydraulic Steering systems for Boats.
  • Universally Designed for outboards rated up to 150 total Horsepower.
  • Compatible with such brands as Yamaha, Suzuki, Honda, Mercury, Nissan, Tohatsu and more.
  • Hydraulic Steering kit built in High class Stainless Steel For Years of trouble free use.
  • 24 feet of quality Hydraulic hose, Top mounted pump, and a ¾” tapered steering wheel shaft guarantee a professional installation on most boats.
Check Stock

GHmarine Transom Saver Support and Trailering Motor Locks for Single Ram Outboard Mercury Evinrude Johnson Yamaha Honda and Tohatsu, Rubber Black

  • Designed for use with single ram trim and tilt systems outboards engines.
  • Compatible with Yamaha, Mercury, Evinrude/Johnson, Suzuki, Honda marine engines.
  • Size with 5 inches Transom Support and 4 inches locks.
  • Simply solves outboard motor trailering problems, Quickly and easily installs around trim and tilt ram.
  • Helps protect your outboard and minimizes strain on the boats transom.
Check Stock

Replacement Dometic SeaStar Control Cable Type 3300/33C Cable Universal for Yamaha Outboard Motor Honda Teleflex Marine Boat Cable Replace SeaStar Solutions Remote Control Throttle Shift Cable, 20ft

  • ...ype 10-32 Threaded Cable Ends. These control cables can be used in any boat and are by far the best choice for long runs, twin stations or other difficult routings with multiple cable bends. Replacing a broken or worn control cable regularly can ensure superior performance and safe driving experience of your Yamaha outboards..
  • FITS THE FOLLOWING MACHINES - Replacement 20 FT CC3320XX Dometic SeaStar Control Cables with 10-32 UNF thread is compatible with Force Marine Control Cable, Chrysler Marine Control Cable, Honda Marine Control Cable, Nissan Marine Control Cable, Suzuki Marine Control Cable, Tahatsu Marine Control Cable, Yamaha Marine Control Cable, Teleflex Marine Control Cable, Morse Marine Control Cable. Please kindly check the fitment and part number before ordering, Thanks!.
  • REPLACES PART # - CC3320XX, Replaces Teleflex CC33220, Replace SeaStar XTREME CCX63320 | Universal type 3300/33C cables are designed to fit aftermarket engine controls as well as OEM units from BMW, Chrysler, Honda, Nissan, Suzuki, Yamaha and others, they are offered for demanding applications in which a smooth feel at the control is essential. Direct replacement for a proper fit and easy installation, quality materials used, meets or exceeds OEM standards, 100% rigor....
Check Stock

Yinlowa Replacement Dometic SeaStar Control Cable Type 3300/33C Universal for Yamaha Outboard Motor Honda Teleflex Marine Boat Cable Replace SeaStar Solutions Remote Control Throttle Shift Cable,13ft

  • ...ype 10-32 Threaded Cable Ends. These control cables can be used in any boat and are by far the best choice for long runs, twin stations or other difficult routings with multiple cable bends. Replacing a broken or worn control cable regularly can ensure superior performance and safe driving experience of your Yamaha outboards..
  • FITS THE FOLLOWING MACHINES - Replacement 13 FT CC3320XX Dometic SeaStar Control Cables with 10-32 UNF thread is compatible with Force Marine Control Cable, Chrysler Marine Control Cable, Honda Marine Control Cable, Nissan Marine Control Cable, Suzuki Marine Control Cable, Tahatsu Marine Control Cable, Yamaha Marine Control Cable, Teleflex Marine Control Cable, Morse Marine Control Cable. Please kindly check the fitment and part number before ordering, Thanks!.
  • REPLACES PART # - CC3320XX, Replaces Teleflex CC33213, Replace SeaStar XTREME CCX63313 | Universal type 3300/33C cables are designed to fit aftermarket engine controls as well as OEM units from BMW, Chrysler, Honda, Nissan, Suzuki, Yamaha and others, they are offered for demanding applications in which a smooth feel at the control is essential. Direct replacement for a proper fit and easy installation, quality materials used, meets or exceeds OEM standards, 100% rigor....
Check Stock

Quicksilver 802889Q1 Oil Drain Pump

  • Fits all MCM/MIE engines with threaded fitting on dipstick tube.
  • Mercury/Mariner 8/9.9 FourStroke outboards MY2004 and prior.
  • 8/9.9 4‑stroke outboards require additional adapter 828369.
Check Stock

881170A15 Boat Motor Side Mount Remote Control Box With 8 Pin for Mercury Outboard Engine PT, Left Side

  • 2 with power trim &15ft cable, Built-in warning horn.
  • -Fits Mercury Outboard Rigging Parts, Controls & Gauges Remote Controls and Components Side Mount 1994 & Up - Cat.# 90-8M0125572 Remote Control-4000 Side Mount(Power Trim) -Fits Mercury (1986 thru 1993) Outboard COMMANDER 2000 REMOTE CONTROL (with integral power trim) -Fits Mercury 1994 & Up Outboard Commander 2000 Remote Control (with integral power trim) -Does not include throttle & shift cables.
  • -Fits Mercury Force 1993 and newer outboards 40hp and higher utilizing style cables (with power trim). -Remote Control cables need Gen I style to connect to control box. -When used with MY2005 and newer 8/9.9/15/20 four-stroke outboards an adapter harness 84-892473A01 is required. -for MY2005 and newer 8/9.9 Four Stroke outboards SAE T/S cables must be used..
Check Stock