Reviews Home Appliance Mould

4 Pack Tray Silicone Molds

  • What you will receive: the package comes with 5 pieces of round coaster resin moulds, 5 pieces of square coaster resin moulds, 2 pieces of silicone coaster storage box mould in rectangle and round, sufficient quantities and proper combinations will satisfy your various DIY needs in daily life.
  • Quality material: these epoxy casting moulds are made of silicone material, they are lightweight, reliable and reusable, they can withstand temperature from minus 40 to 446 degrees Fahrenheit, you can use them for a long time, and they are non-toxic, safe and tasteless, easy to clean with warm soapy water.
  • Simple to use: our round and square resin moulds set has smooth interior, so they are easy to demould, you just need to put the required filler into the mould, wait a while until the resin is completely cured, and gently twist the mould to push it out without tearing easily, while maintaining the shape of the mould.
  • Size of products: the diameter of round craft resin coaster mould is approx. 9 cm/ 3.54 inches, the size of the square coaster silicone mould is approx. 9 x 9 cm/ 3.54 x 3.54 inches, the round coaster holder silicone mould measures about 4 x 10.5 cm/ 1.57 x 4.13 inches, and the size of rectangle coaster storage box silicone mould is approx. 4 x 7 x 1....
Check Stock

Solimeta Natural Gas or LP Gas Manifold Pressure Test Kit, LP Gas Pressure Tester, Natural Gas Meter, 0-35' W.C

  • For measuring the low pressure in natural gas or LP gas pressure across appliance manifolds..
  • 2-1/2″ capsule gauge, 40″ Rubber Hose..
  • Pressure range: 0-35″W.C, 2.5-4 for natural gas, 10 to 12 for LP gas..
Check Stock

Ice Roller for Face, Black Facial Ice Roller Mould, Silicone Face Ice Cubes for Skin Care and Pain Relief, Reusable DIY Facial Care Ice Mould

  • 【Easy to Make Ice & Demould】After frozen for no less than 12 hours in the environment below -10℃, submerge one end of the lid of the frozen ice mould under running water for 30 seconds, and then easily remove the lid horizontally..
  • 【Anti-Spill Design】We added a high quality silicone sealing ring to the seam in the middle of the ice mould, which can enhance the sealing performance of the ice mould and prevent the water in the mould from overflowing..
  • 【Good for Skin Care】The face roller with ice on the face can Improve puffiness, Moisturizing before makeup, Soothes and repairs after sun exposure, Shrink pores and tighten skin and Improve fine lines. Different DIY beauty materials can be matched according to your needs. (Such as Cherry Tomatoes, Milk, Rose, Cucumber, Lemon ect).
  • 【Also Good for Pain Relief】This ice mould is a very practical must-have gadget at home. In addition to good for facial rejuvenation, you can Use this ice mould to ice compresses for relieving physical discomfort. (Such as Toothache, Headache, Fever and Sprain ect).
  • 【Practical Gift】This ice mould is approx. 2.2 x 1.6 x 3.9 inch which is very comfortable to hold, small and light design, and easy to grasp, also the ice roller hea....
Check Stock

Silicone molds Butterfly and Flower Halloween Theme Spring Theme Craft Art Silicone Soap Mold Craft Molds DIY Craft Art Soap Making Molds

  • ENJOY SOAP MAKING AT HOME - large silicone soap mould is cute and practical.
  • hand soap mould has a cavities with unique patterns which will make a....
  • RELIABLE MATERIAL - cold process soap mould is made of high-quality silicone, which is food grade, heat and cold, flexible but sturdy enough to serve....
  • PLENTY OF USES - it's good to use these decorative soap moulds not only as bath soap moulds or body lotion bar moulds but also as jello mould,....
  • EASY TO USE - flexibility and surface of the soap making moulds ensure very easy of the handmade soap or dessert.
  • THE BEST HANDMADE GIFTS IDEA - silicone soap mould tray and E-Book with easy homemade soap recipes may serve as the ultimate gift for every creative....
Check Stock

7 Pieces Silicone Resin Casting Moulds Set, Include 2 Universal Lighter Protective Cover Resin Mould Square Coaster Silicone Mould Spice Grinder Epoxy Mould for DIY Craft

  • Package quantity: package comes with 5 pieces silicone resin casting moulds, including 2 x universal lighter protective cover resin mould, 1 x square coaster silicone mould, 1 set of spice grinder epoxy mould, enough for you to make desired crafts.
  • Size detail: the universal lighter protective cover resin mould measures approx. 6.6 x 3.5 cm and 5.2 x 3.5 cm, the square mould is about 9.5 cm in diameter, and the grinder epoxy mould is about 6 cm in diameter, please allow a little error on the size due to manual measurement.
  • Durable material: these resin casting moulds are made of durable silicone material, not easy to break, durable to serve you for long time, and with smooth interiors, reducing the need to cut back and polish the finished resin crafts, easy to release after the resin is fully cured.
  • DIY you own craft: these epoxy DIY moulds are compatible with epoxy resin, wax, soap and other materials, add some sequins, resin dyes, dried flowers and other decors into the mould, to make practical coasters, cup mats, wall decorations, hanging ornaments, home table decors, art works and other DIY projects.
  • Nice gift choice: you can send our silicone resin moulds set to others who are DIY lovers as gifts, or send the finished products to your lover, friends....
Check Stock

Silicone Molds Fairy Butterfly, Beautiful Faery Shape Craft Art Soap Molds, Angel Craft Molds DIY Handmade Soap Molds - Soap Making Supplies by ZKAYX

  • ENJOY SOAP MAKING AT HOME - large silicone soap mould is cute and practical.
  • hand soap mould has a cavities with unique patterns which will make a beautiful design on your soap.
  • RELIABLE MATERIAL - cold process soap mould is made of high-quality silicone, which is food grade, heat and cold, flexible but sturdy enough to serve for a long time.
  • PLENTY OF USES - it's good to use these decorative soap moulds not only as bath soap moulds or body lotion bar moulds but also as jello moulds, silicone cake mould.
  • EASY TO USE - flexibility and surface of the soap making moulds ensure very easy of the handmade soap or dessert.
  • silicone moulds are also easy to clean and store.
  • THE BEST HANDMADE GIFTS IDEA - silicone soap mould tray and E-Book with easy homemade soap recipes may serve as the ultimate gift for every creative person whose favorite hobby is soap making.
Check Stock

Roastove Natural Gas or LP Gas Manifold Pressure Test Kit, LP Gas Pressure Tester, Natural Gas Meter, 0-35" W.C

  • 【Application】For measuring the low pressure in natural gas or LP gas pressure across appliance manifolds..
  • 【CONTENTS】 2-1/2" dial size, 40" Rubber Hose, 1/8"NPT male brass fitting, protected and fit in a mould plastic box..
  • 【RANGE】 0-35"W.C./Ounces per square inch, 2.5 to 4' W.C. for natural gas, 10 to 12" W.C. for LP gas..
  • 【DURABLE】Black steel case, snap on acrylic window, beryllium diaphragm capsule, brass movement and connection..
Check Stock

Measureman Natural Gas or LP Gas Manifold Pressure Test Kit, 0-35 "W.C, 1/4"NPT, 40" Length Hose

  • For measuring the low pressure in natural gas or LP gas pressure across appliance manifolds.
  • 2-1/2" dial size, 40" Rubber Hose, 1/8"NPT male brass fitting, protected and fit in a mould plastic box.
  • Pressure range: 0-35"W.C./Ounces per square inch, 2.5 to 4' W.C. for natural gas, 10 to 12" W.C. for LP gas.
  • Black stel case, snap on acrylic window, beryllium diaphragm capsule, brass movement and connection, lower mount.
Check Stock

10 Pieces Coaster Resin Moulds, Include 2 Silicone Coaster Storage Box Mould 4 Square Epoxy Casting Mould 4 Round Silicone Moulds for Candle Holder, Soap Box, Cups Mats, Home Decoration (White)

  • What Your Will Receive: the silicone cup mat storage box mould set has 4 round silicone cup mat moulds, 4 square silicone cup mat moulds, 1 round cup mat storage box mould and 1 square cup mat container mould, the quantity and shape can meet your various needs.
  • Wear Resistant to Use: the cup mat resin moulds are made of quality silicone material, flexible and soft, easy to use and release, safe and wear resistant, smooth inside, no need to cut and polish the finished resin, easy to clean and reusable.
  • Easy to Demould: after the resin is fully cured, you just need to gently rotate the mould and release the finished product, the finished product is very shiny and smooth like a mirror, no sticking, no need to cut and polish, save your time.
  • Nice Handmade Gift: you can use our cup mat silicone moulds to make nice looking cup mats, give the finished products as gifts to your family, friends and partners on Christmas, Valentine's Day, birthday, Thanksgiving, anniversary or other occasions and festivals, or you can give the mould directly to resin DIY lovers, your family and friends will love this set of cup mat.
Check Stock

LOVEINUSA Ice Cream Mold Set, Square Cakesicle Mold Small Popsicle Molds 50 Wooden Sticks for DIY Ice Cream Cake Mousse Dessert

  • PACKAGE INCLUDED - 1 x Square Chocolate-like Popsicle Mould, 1 x Classic Popsicle Mould, 50 x Wooden Stick, each mould has 4 cavities, suitable for both kids and adults..
  • SIZE - Chocolate-like Mould: 10.25 x 5.75inches, Classic Mould: 8.4 x 4.8inches, Popsicle Stick: 4.5inches (L), Cavity of Chocolate-like Mould: 1.9 x 3.1inches, Cavity of Classic Mould: 1.5 x 2.75inches.
  • PREMIUM QUALITY - Our Ice Pop Molds are all made of food-grade silicone, eco-friendly and BPA free, can stand with the temperature ranging from -40-230 degrees Celsius. Can be put in the fridge and oven. Washable and dishwasher safe..
  • PERFECT DESIGN - Our popsicle molds are compact and easy to store. Stackable in the fridge, room-saving and easy to clean up, labor-saving. Easy to pop the popsicle out when frozen. Lightweight and reusable, designed for long-term use..
  • VARIOUS APPLICATIONS - Our popsicle mould is not only perfect for all kinds of ice creams making but also for freezing fruit, cakesicle, mousse and other desserts making. Suitable for both refrigerator and oven..
Check Stock

SKEMIX Custom Stencil Beautiful Vintage Font Alphabet Letters 1.2' Font 11' x 8.5'

  • DDissneey Font Uppercase Alphabet Letters Cake Mould easy to use and clean..
  • Set of 36pcs DIY Letter Cake Mould Fondant Sugarcraft Cookie Plunger Cutter Mold Decorating Tools, Creative your home and kitchen life..
  • High Quality Food Grade Plastic, safe in the dishwasher for easy clean up..
  • Tapered Edge for Easy Cutting of Fondant, Dough, Play Doh, and Anything Else..
Check Stock

Silicone Flower Pot Mold,Round Succlent Flower Pot Mold Silicone Cement Mold Handmade Gypsum Concrete Plants Pot Vase Mould Plaster Art Decor Home Garden

  • 【DIY Silicone Flower Pot Mold】Made of silicone material, soft, durable, can be reuse, non-toxic and long time to use. Heat-resistant temperature....
  • 【Multi Usages Succulent Plant Vase Planter Cement Molds Concrete Clay Mould,Concrete Molding Tool】This mold can be used to as cement/ plaster/....
  • 【Home Garden Decoration Craft Concrete Planter Pallet Mould】Please use Cement or concrete if to make flower pot.
  • 【Reusable DIY Molds】This reusable mold features novel design, soft texture, changeable style and is easy to release and clean. You can use it....
  • 【Package Includes】 1 pcx Silicone Flower Pot Mold,can be used for Succulent Plant Flower Pot, Cement Fleshy Plant Flower Pot Silicone Mould, DIY....
Check Stock

5 Pieces Maple Leaf Jewelry Resin Moulds Spice Silicone Mould and Lighter Protective Cover Epoxy Mould Set for DIY Crafts Resin Casting Candle Wax Soap Making Projects Supplies

  • What's included: the package contains 5 pieces resin casting moulds, including 1 piece maple leaf jewelry mould and 2 pieces (1 pair) spice grinder resin moulds and 2 pieces lighter protective cover resin moulds in two size, enough for you to apply and satisfy your various needs.
  • Nice material: these epoxy moulds are made of silicone, which are reliable and easy to release materials, and the mould is not easy to get deformed, washable, please pay attention to blending ratio when adjusting glue.
  • Dimension: the size of maple leaf jewelry mould is approx. 16 x 18 cm/ 6.3 x 7 inches, the diameter of spice grinder resin mould is approx. 6 cm/ 2.4 inches, the size of lighter protective cover resin mould is approx. 6.6 x 3.5 x 2.5 cm/ 2.6 x 1.4 x 0.98 inch and 5.2 x 3.5 x 2.5 cm/ 2 x 1.4 x 0.98 inch, proper sizes are simple for you to operate.
  • How to use: you just need to twist the silicone mould and release your items out of the mould after the resin is completely dry and solidified, no tearing while the mould maintains its shape, so convenient for your DIY crafts.
  • Design your styles: our epoxy casting moulds provide interesting DIY ways for you to make, you can add some dry flowers, sequins, powder or pigments of various colors into the resin mould, or add a ....
Check Stock