Reviews Hollow Punch

9 Pieces Roll Pin Punch Set and 4 Pieces Hollow End Starter Punch Tool with Carry Case for repairing or servicing equipment, machines, and vehicles

  • ★9 pieces roll pin punch set is made of highly quality hardened 40# steel, drop forged, heat treated & knurled steel for extreme durability, workability, 4 pieces starter punch tool is made of highly quality stainless steel.
  • ★9pcs roll pin punch set including 1/16”, 5/64”, 3/32”, 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, 5/16”size, perfect tool for gunsmith, jewelers, watchmakers building, engineers, carpenters - use on guns, machinery, vehicles, woodwork and crafts, excellent tool for adding into your armorers wrench package.
  • ★4 pcs hollow end starter punch set including 1/8”, 5/32”, 3/16”, 7/32”,will cover all of the AR platform including trigger guard, gas block, and forward assist.
  • ★Hollow end roll pin punch set helps to prevent damage caused by an accidental slip off while getting the pin started.
  • ★This 9pcs roll pin punch set and 4pcs hollow end starter punch set come with red carrying bag, easy to use, carry, storage or hang this tool set.New set could be replaced if you have any problems.
Check Stock

ABN Hollow Punch Kit Leather Punches Tools Hole Punch Set Gasket Punch Set Gasket Cutter 3/16 to 1-3/8in (5-35mm)

  • ELIMINATE GUESSWORK: Punch accurate washers and gaskets with the ABN | 13 in 1 Hole Punch Kit Hollow Leather Punch Set.
  • This hollow hole punch set is a gasket hole punch set that makes clean and precise holes from 3/16-inch to 1-3/8-inch (5-35mm) in diameter to create round gaskets and washers in leather, copper, plastic, rubber, paper, cork, and any material that is hard to cut with a regular scissor or knife (accepted thickness depends on material.
  • EASY TO USE: Select one of the interchangeable hole punch heads and thread it onto the tip of the hollow punch tool.
  • Hold the comfortable grip tool handle with one hand while using a hammer (not included) on the top bolt to drive the tool into your selected material.
  • The pin point is spring-loaded and retracts into handle when punching a hole.
  • Pin point is removable to cut disks with no middle hole – Unscrew top bolt, remove rubber grip, and release Allen socket screw to remove the center pin.
  • BUILT TO LAST: Hole punches constructed from drop-forged heat-treated steel for maximum strength and longevity while the 4.25-inch x 2.75-inch (10.8cm x 7cm) leather hole punch tool handle is constructed with a rubber sleeve for a comfortable grip with less user fatigue....
Check Stock

OWDEN Professional 6Pcs. Leather Hollow Punch Set. Size: 1.0-5.0mm for Leather Belt, Watch Band and Leather Strap Gasket. with a Free Mini Cutting mat.

  • OWDEN Professional 6Pcs.leather hollow punch set, This Tool has a slim design to better maintain the verticality and smooth for the leather hole..
  • Each hollow punch sizes:1.0mm,1.5mm,2.0mm,3.0mm,4.0mm,5.0mm. With a free mini cutting mat. Punch size is very accurate..
  • These sizes are especially suitable for punching for leather belt, Watchband, Leather strap, And thin rubber, Plastic sheet,Canvas ,Clothing,Paper Etc..
  • The Leather hollow punch set with black finshed to avoid rust. Wipe with anti-rust oil after use..
  • Each product has a laser-marked OWDEN logo and size. Red Pvc pouch package. Trust OWDEN..
Check Stock

Round Hollow Punch Set 12Pcs Leather Craft Punch Tool Hollow Hole Punch Cutter Tool for Watch Bands Belts Canvas Paper Plastics(1mm to 10mm)

  • ★Hollow punch set easy to use by placing gasket hole punch over area that needs a hole and hit back end with a hammer or mallet, making distinctive artistic and aesthetics effects on leather with different patterns punchers.
  • ★Round hollow punch cutter come with hardened carbon steel, leather hollow punch features durable sharpness, well-tempered& round cutting edge, knurled body for secure grip& easy identification.
  • ★Paper gasket hole punch with milled cleaning hole and polished barrel for punching holes on handbags, pliable plastics, clothing, vinyl, cardboard, webbing, jacket or poster-board etc.
  • ★12 Pcs different size can be choose Size: 1,1.5,2,2.5, 3, 4, 5, 6, 7, 8, 9, 10m.Metal round leather hole puncher is suitable for falconry, hobbies, crafts, modeling, home repair etc. when making purses, file packages, vinyl or any custom leather work.
  • ★Please note:keep out of the children's reach due to sharp prong gasket cutter punching tool. Softer surface beneath leather to avoid dull or break. Beeswax putted on the end before using to help passing through easier.
Check Stock

10Pcs Leather Hole Punch Cutter 0.5mm-5mm Leather Working Tools for Leather Watch Bands Belts Canvas Paper Plastics Round Hollow Hole Punch Cutter Tool

  • ★Round hollow punch set easy to use by placing gasket hole punch over area that needs a hole and hit back end with a hammer or mallet, making distinctive artistic and aesthetics effects on leather with different patterns punchers.
  • ★Hollow punch cutter come with steel alloy material, leather hollow punch features durable sharpness, well-tempered& round cutting edge, knurled body for secure grip.
  • ★Paper gasket hole punch with milled cleaning hole and polished barrel for punching holes on handbags, pliable plastics, clothing, vinyl, cardboard, webbing, jacket or poster-board etc.
  • ★10Pcs different size can be choose Size: 0.5mm,1.0mm,1.5mm,2.0mm,2.5mm,3.0mm,3.5mm,4.0mm,4.5mm,5.0mm.Metal round leather hole puncher is suitable for falconry, hobbies, crafts, modeling, home repair etc. when making purses, file packages, vinyl or any custom leather work.
  • ★Please note:keep out of the children's reach due to sharp prong gasket cutter punching tool.Surface coating of oil to prevent rust,please clean it up before you use.
Check Stock

Mayhew 62254 Pro Pilot Punch Kit, 12-Piece

  • Pilot punches, an original Mayhew patented design, also called a roll pin punch, are a punch that fits tightly within a roll pin.
  • Drives and removes roll pins and other hollow tension pins.
  • Black oxide finish for additional rust protection.
  • 12-Piece Set includes: 1/16 x 2-3/4" Pilot Punch, 5/64 x 3/14" Pilot Punch, 3/32 x 3-1/2" Pilot Punch, 1/8 x 4" Pilot Punch, 5/32 x 4-1/2" Pilot Punch, 3/16 x 4-1/2" Pilot Punch, 7/32 x 5" Pilot Punch, 1/4 x 5-1/2" Pilot Punch, 5/16 x 6" Pilot Punch, 3/8 x 6" Pilot Punch, 7/16 x 6" Pilot Punch, 1/2 x 6" Pilot Punch.
Check Stock

CARL Heavy Duty Paper Punch 3 Hole, 300 sheet

  • High-strength "samurai steel" hollow-core punch head technology requires less force.
  • Adjustable margin depth selector and centering guides.
  • large-capacity waste tray, Heavy-gauge steel..
  • Built-in paper guide for perfect positioning.
  • Limited lifetime warranty - excluding punch heads and disks.
  • Punch heads available in 9/32-inch diameter and 11/32-inch diameter.
  • Check the punch heads frequently and replace them when they were over used (Punch heads also separately available in Replacement Punch head kit).
Check Stock

Keadic 52 Shape One Hole Punch Cutter Set with Plastic Storage Case, Hollow Leather Punching Tools for Handmade Leathercraft Polymer Clay Crafting Jewelry Making

  • 【What you Get】The hollow hole punch cutter tool kit contains 52 shape leather shape cutter, a carving knife with 5pcs replaced blades, a double-faced soft hammer and A5 cutting mat, totally 60pcs. In addition, we offer a plastic storage case for you to keep the hollow hole punch cutter organized. Different sizes and shapes of punch cutter tools will meet your various demands in leather crafting..
  • 【52 Shape One Hole Hollow Punch Cutter】Our leather punch cutter tool contains round holes, rectangle holes, square holes, oval holes and irregularly shaped holes. Made from high density alloy steel, high hardness for durability. The the resultant cuts are crisp and straight that shapes are well formed and don't leave marks..
  • 【Practical Accessories for Labor-saving】 The A5 self healing cutting mat is made of 5 layer high quality PVC material. Both sides with metric and imperial measurement, 1/2" grid lines and 30°, 45°, 60°, 90°angle guides to help accurate cutting.
  • High carbon steel blade is sharp to ensure smooth and burr-free cutting. Double-faced design hammer with nylon and rubber head offers the ultimate non slip control without scratchin....
Check Stock

10Pcs Leather Hole Punch Cutter, 1.0mm-4.5mm Leather Punch Tool Round Hollow Hole Punch for Belts, Leather, Rubber Soft Material Working

  • Hole Punch Set Size: 10 pieces leather puncher round hollow leather hole punch, the sizes are: 1.0mm, 1.2mm, 1.5mm, 1.8mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4.0mm, 4.5mm..
  • High Material: Made of drop forged, heat treated steel for long-life sharpness and durability.The surface of the hollow punch cutter tools are coated with oil to prevent rust..
  • Wide Use: Suitable for punching holes in soft materials such as leather, watchbands, rubber, vinyl, handbags, clothing, cardboard, webbing, jackets or poster boards..
  • Easy to Operate: By placing a gasket puncher on the area that needs to be punched, and hitting the back end with a hammer or mallet,the easy-to-use circular hollow puncher has a unique art on the leather of different punchers..
  • Please Note: Please keep it out of the reach of children due to the sharp-pointed gasket cutting tool. The surface should be oiled to prevent rust, please clean up before use..
Check Stock

Bostitch Antimicrobial Xtreme Duty Adjustable 2-3 Hole Punch, 160 Sheets, Silver/Black (03200)

  • Antimicrobial agent prevents growth of bacteria on the surface of the punch..
  • Hollow punch mechanism assures a clean punch through of up to 160 sheets.
  • Heavy steel construction and 7-year warranty..
Check Stock

General Tools 1280M Hollow Steel Punch 1/2 in

  • The GENERAL TOOLS and instruments 1280M hollow steel punch, 1/2" Is meant for punching a 1/2" hole.
  • The punch works on leather, rubber, gasket material, cardboard and softer metals.
  • The internal punch features a side Clearance hole for easy removal of punched material.
  • Item Package Dimension: 3.0" L x 3.0" W x 7.0" H.
Check Stock

General Tools Leather Hole Punch Tool - 6 Multi-Hole Sizes for Leather, Rubber, & Plastic - Hobbies & Crafts 8.5 inches

  • HEAVY DUTY HOLE PUNCH: A leather punch is designed for making holes in leather. The working tip is a hollow steel cylinder with a sharp circular knife-like edge, and the grip handles are comfortable to use..
  • BELT HOLE PUNCHER: Our versatile plier-like gadget can also be used for making round holes in canvas, denim, cloth, and cardboard. The instrument is made of plated steel with 6 sharp and hollow hardened steel punches..
  • FABRIC HOLE CUTTER: Make little punches with a single-style force to your belt, purse or watch strap, pet collar, tote bag, or a DIY project. The hand tool is self-opening, revolving, and strong yet accessible and convenient for unisex use..
  • DIFFERENT SIZE HOLE PUNCHER: Learn the art of crafting with our non-clogging punch sizes ranging from 5/64.
Check Stock

OWDEN Professional 13 Pcs Leather Hole Punch Set (Slim Style) 1.0-12MM for Leather Belt,Watch Band and Leather Strap Gasket. with a Free 3\ Nylon mat.

  • OWDEN Professional 13Pcs.leather hole punch set, The Tool has a slim design to better maintain the verticality and smooth for the leather hole..
  • Each hollow punch sizes:1.0mm,1.5mm,2.0mm,3.0mm,4.0mm,5.0mm,6.0mm,7.0mm,8.0mm,9.0mm,10mm,11mm,12mm. All hole size is very accurate..
  • These sizes are especially suitable for punching for leather belt, Watchband, Leather strap, And thin rubber, Plastic sheet,Canvas ,Clothing,Paper Etc..
  • The Leather hollow punch set with black finshed to avoid rust. Wipe with anti-rust oil after use..
  • Each product has a laser-marked OWDEN logo and size. Canvas pouch with a color box package. Trust OWDEN..
Check Stock