Reviews Holley Tunnel Ram Intake Manifold

Speedway Motors Shotgun Bill's Scoop Aluminum Air Intake Scoop, Polished

  • Perfect addition to your tunnel ram intake manifold.
  • Includes throttle linkage arms for the anodized butterflies to connect to your carburetor.
Check Stock

Tektall Intake manifold adapter Replace for TBI 5.7 350 adapts a small block 1.75" bore throttle body injection 1" thick Fits Pattern 4-barrel Manifold Alloy Durable

  • 【Fitment】 Tektall Intake manifold adapter Replace for TBI 5.7 350..
  • 【Good Quality】 Made from a super durable and heat resistant composite material. This part is far better that a 1/2" or less steel or aluminum spacer.A full 1" thick . Bores match the bores of the throttle body and taper to match a 4 barrel intake without hurting airflow which is a proven way to increase TQ and airflow.Mounting holes to the manifold are slotted for tuning adjustments..
  • 【High performance】 Tektall Intake manifold adapter's bores are tapered in to adapt the wider TBI unit to the narrow Holley edelbrock pattern 4bl manifold. This is very important many adapters don't have this feature. This can cause poor performance that is blamed on the computer, injectors ect. when it is really the adapter..
  • 【Package includes】 1 X Intake manifold adapter, 1 X Gaskets, 1 X Mounting stud kit （Studs, nuts, and washers.） , 1 X Manual..
  • 【NOTE】 Please confirm the item if it matches your machine before you purchase. All Tektall products will undergo strict inspections and strong packaging before shipment.Please rest assured to purchase.Thanks..
Check Stock

Dokili Aluminum Intake Manifold Small Block Air Gap for SBC Vortec 350 1996-up

  • 【Fitment】Dokili aluminum intake manifold is compatible with 96+ Vortec engines..
  • 【Features】Dokili intake manifold comes with 180° high rise and dual-plane designs, providing excellent high RPM power, from 1,500 to 6,500 rpm. It features four corner water outlets, dual distributor hold down provisions, accepting late model water neck, A/C, alternator and HEI brackets..
  • 【Premium Material】Built with natural finish aluminum of superb quality and fit. Angles and straightness comparable to factory manifolds. Port size measures 2.06" x 1.18" and intake measures 4.65" tall..
  • 【Dual Plane】The intake is square bore style and works with all 4150 Holley style carburetors. Dual plane designs have two smaller plenums that receive air from the carburetor or throttle body, which results in a higher velocity through the booster making the engine more responsive to the driver..
  • 【Air Gap】The air gap design allows air to flow under the plenum to prevent heat transfer from the engine resulting in more horsepower..
Check Stock

Weiand 7547-1 X-CELerator Intake - Chevy Small Block V8 - IMCA

  • IMPROVE ENGINE PERFORMANCE AND HORSEPOWER with this higher flowing intake manifold compared to a stock cast iron intake.
  • DESIGNED TO FIT WITH POPULAR AFTERMARKET SQUARE BORE 4150 AND 4160 CARBURETORS including Edelbrock, Holley, Quickfuel, Proform, and more.
  • FITS GM AND CHEVROLET CYLINDER HEADS from 1955 through 1986.
  • 3000 TO 7500 RPM POWER BAND for street or mild race applications.
  • FABRICATED FROM CAST ALUMINUM for weight savings and improved performance.
Check Stock

TYFYB Aluminum Satin Intake Manifold For Small Block Chevy SBC 305 327 350 400 1957-1986 1500-6500 RPM

  • Intake gaskets with 1.23" wide x 1.99" tall port holes.
  • Carburetor Flange Type:4-Barrel Square Bore.
  • Aluminum intake is a dual plane, 180° street manifold designed to be used with Holley, Carter AFB or Edelbrock square flange carbs..
  • Power comparable to single plane manifolds yet retains throttle response/driveability of a dual plane.
  • Fitment:Fits 1957-86 SBC Chevy engine applications..
Check Stock

Red Seats, Volume 2 [Explicit]

  • Brand New Quick Fuel Technology Brawler Street Carburetor, Mechanical Secondaries, 750 CFM, 4150, Red Billet Color (Holley Part #BR-67320).
  • Brawler continues to lead the pack with their newest family of carburetors in a black with red billet color combination. While the look is new, the out of the box performance is the same that you have come to expect from Brawler..
  • Brawler Street carburetors come with red billet metering blocks with the latest technology in air/fuel calibrations for modern street or race engine demands. They also come with red billet throttle bodies for superior durability and throttle shaft stability..
  • Brawler Street models offer all of the options and tunability that you would find from more expensive carburetors in the market, including an electric choke, a beautiful finish, and 4-corner idle adjustment on all mechanical secondary models..
  • NOTE: This model of carburetor has the square bore flange bolt pattern. It can replace Holley, Edelbrock, Carter AFB & Autolite style carburetors with 5 3/16" x 5 5/8" bolt pattern. If you have a spreadbore style intake manifold, you will need an adapter to install this carburetor. Similar to the Mr. Gasket #1932..
Check Stock

JEGS Small Block Chevy 1996-2002 AirGap Intake Manifold | For Use With Vortec Cast Iron Cylinder Heads | 1500-6500 RPM Power Range | Satin Aluminum | Square Bore Carburetor Mounting Pad

  • IMPROVE ENGINE PERFORMANCE AND HORSEPOWER with this higher flowing intake manifold compared to a stock cast iron intake.
  • DESIGNED TO FIT WITH POPULAR AFTERMARKET SQUARE BORE 4150 CARBURETORS including Edelbrock, Holley, Quickfuel, Proform, and more.
  • FITS GM AND CHEVROLET VORTEC CAST IRON CYLINDER HEADS from 1996 through 2002.
  • 1500 TO 6500 RPM POWER BAND for street or mild race applications.
  • FABRICATED FROM CAST ALUMINUM for weight savings and improved performance.
Check Stock

JEGS Small Block Chevy 1996-2002 Intake Manifold | For Use With Vortec Cast Iron Cylinder Heads | Non-EGR | Idle - 5500 RPM Power Range | Black Cast Aluminum | Square Bore Mounting Pad

  • IMPROVE ENGINE PERFORMANCE AND HORSEPOWER with this higher flowing intake manifold compared to a stock cast iron intake.
  • DESIGNED TO FIT WITH POPULAR AFTERMARKET SQUARE BORE 4150 CARBURETORS including Edelbrock, Holley, Quickfuel, Proform, and more.
  • FABRICATED FROM BLACK CAST ALUMINUM for weight savings, great looks, and improved performance.
  • FITS GM AND CHEVROLET VORTEC CAST IRON CYLINDER HEADS from 1996 through 2002.
  • IDLE TO 5500 RPM POWER BAND for street or mild race applications.
Check Stock

NEW HOLLEY STREET DEMON CARBURETOR,SHINY,625 CFM,4 BARREL,ELECTRIC CHOKE,GASOLINE ONLY,VACUUM SECONDARIES

  • ...tion and dual mounting pattern make it run-ready for a large variety of engines and vehicles!.
  • NOTE: This model of carburetor has the square bore flange bolt pattern. It can replace Holley, Edelbrock, Carter AFB, and Autolite style carburetors with 5 3/16" x 5 5/8" bolt pattern. If you have a spreadbore style intake manifold, you will need an adapter to install this carburetor. Similar to the Mr. Gasket #1932..
Check Stock

JEGS Small Block Chevy 1996-2002 Intake Manifold | For Use With Vortec Cast Iron Cylinder Heads | Non-EGR Design | Idle - 5500 RPM Power Range | Polished Aluminum | Square Bore Carburetor Mounting Pad

  • IMPROVE ENGINE PERFORMANCE AND HORSEPOWER with this higher flowing intake manifold compared to a stock cast iron intake.
  • DESIGNED TO FIT WITH POPULAR AFTERMARKET SQUARE BORE 4150 CARBURETORS including Edelbrock, Holley, Quickfuel, Proform, and more.
  • FITS GM AND CHEVROLET VORTEC CAST IRON CYLINDER HEADS from 1996 through 2002.
  • IDLE TO 5500 RPM POWER BAND for street or mild race applications.
  • FABRICATED FROM CAST ALUMINUM for weight savings and improved performance and then polished for beautiful looks under your vehicle’s hood.
Check Stock

NEW QUICK FUEL TECHNOLOGY BRAWLER STREET CARBURETOR,RED BILLET BLACK FINISH,MECHANICAL SECONDARIES,650 CFM,4150 MODEL,COMPATIBLE WITH GASOLINE

  • Brand New Quick Fuel Technology Brawler Street Carburetor, Mechanical Secondaries, 650 CFM, 4150, Red Billet Color (Holley Part #BR-67318).
  • Brawler continues to lead the pack with their newest family of carburetors in a black with red billet color combination. While the look is new, the out of the box performance is the same that you have come to expect from Brawler..
  • Brawler Street carburetors come with red billet metering blocks with the latest technology in air/fuel calibrations for modern street or race engine demands. They also come with red billet throttle bodies for superior durability and throttle shaft stability..
  • Brawler Street models offer all of the options and tunability that you would find from more expensive carburetors in the market, including an electric choke, a beautiful finish, and 4-corner idle adjustment on all mechanical secondary models..
  • NOTE: This model of carburetor has the square bore flange bolt pattern. It can replace Holley, Edelbrock, Carter AFB & Autolite style carburetors with 5 3/16" x 5 5/8" bolt pattern. If you have a spreadbore style intake manifold, you will need an adapter to install this carburetor. Similar to the Mr. Gasket #1932..
Check Stock

Carburetor Intake Manifold Boot Joint for Yamaha Warrior 350 YFM350X 1987-2004, Fit for Yamaha Wolverine 350 YFM350FX 4x4 1995, 1UY-13586-01-00, 1UY-13586-02-00, CNC 6061-T6 Aluminum Alloy

  • 1. Fitment - CNC aluminum alloy carburetor carb intake manifold boot fit for Yamaha Warrior 350 YFM350X 1987-2004, fit for Yamaha Wolverine 350 YFM350FX 4x4 1995.
  • 2. Reference OE Number - 1UY-13586-01-00, 1UY-13586-02-00.
  • 3. Function - Replacing the new intake manifold interface can solve problems such as high idle speed, weak acceleration and easy flameout during acceleratio. The carburetor intake manifold boot replaces the old or broken manifold boot perfectly..
  • 4. Material + Installation - Carburetor carb intake manifold boot made of premium quality rugged design with aluminum alloy material, for extended lifetime, with high temperature resistance, high pressure resistance and other advantages. Easy to install, just replace the old or broken intake manifold interface during installation.
  • 5. Service - We offer CNC aluminum alloy carburetor carb intake manifold boot 2-years shelf life, hassle-free return and money back policy, buy with confidence! any questions about carburetor carb intake manifold boot, please contact us by email, we will reply you within 12 hours, you will get a brand new CNC aluminum alloy carburetor carb intake manifold boot.
Check Stock

MOSTPLUS 615-175 329-01780 W7Z9424AA1 Intake Manifold Compatible with Ford Crown Victoria Explorer Mustang 4.6L

  • 【Fitment】— Compatible for 2001-08 Ford Crown Victoria Intake Manifold V8 4.6L (8th Vin Digit W) , Compatible for 2006-11 Ford Crown Victoria Intake Manifold V8 4.6L (8th Vin Digit V) , Compatible for 2001-05 Ford Crown Victoria Intake Manifold V8 4.6L (8th Vin Digit 9) , Compatible for 2002 Ford Explorer Intake Manifold V8 4.6L (8th Vin Digit W) , Compatible for 1999-04 Ford Mustang Intake Manifold V8 4.6L (8th Vin Digit X)(Detailed Apllication below).
  • 【OEM Part Number】 — 1W7Z9424AB, 329-01780,3W7Z9424AA,3W7Z9424AD,615-175.
  • 【Function】— The intake manifold supplies air to the cylinders of an engine. High quailty material, excellent performance, high resistance..
  • 【High Quality】— This intake manifold is made to meet or even exceed the standard quality to help your car start normally..
  • 【Note】— Not correct for models with coolant-heated PCV. Please check the year, make, model and trim of your vehicle in the garage before purchase..
Check Stock