Reviews Hole Reamer

5/8 Bridge Reamer Bridge/Construction Reamer 1/2 Shank M2 HSS Taper Chucking Reamer Bit Tool for Steel Metal Alloy Wood Plastic Drilling Hole

  • Material: 5/8 bridge reamer is made of high-quality M2 HSS steel, with high toughness, high-temperature resistance, corrosion resistance and long service life. Compared to other commonly used low-grade high-speed steels, M2 has an increased content of tungsten and molybdenum, both key elements for improved durability.
  • Wide Application: HSS bridge reamers can enlarge or align existing holes and are suitable for various materials such as aluminum, brass, bronze, cast iron, copper, iron, metal, nickel, plastic, steel and other structural materials Note: It requires existing holes Or a pilot hole is required.
  • Size Infor: Length of chucking reamer is 6.5 inch.
  • Safe to Use: Designed with helical flutes and safety stops to keep chips away from the operator. The safety collar stops to prevent over-penetration and loss of operator stability.
  • Design: The tapered tip design allows the reamer to fit into unevenly overlapping holes, aligning the bolt holes. The 5/8" bridge reamer is not a drill, it just aligns the reamer with the pre-drilled hole.
Check Stock

T Handle Tapered Reamer Tool 3-13mm(1/8-1/2 ), 6 Fluted Chamfer Bridge Pin Hole Handheld Chaser, 45# Steel 1/4\ Hex Shank Durable for Chamfering Taper Holes Countersink Latches Guitar

  • CHAMFER REAMING TAPER REAMER: 3-13mm (1/8-1/2) six-blade taper reamer, taper hole, chamfer deburring and other functions, convenient for screw sinking, convenient and quick..
  • PURPOSE 1: Removal of burrs: remove from wood, cut pipes, pipes and ducts. Internal deburring edge tool, the capacity is 1/8" to 1/2"..
  • PURPOSE 2: Enlarged bridge pin hole, headstock, hole for tuner and volume/tone knob.
  • LABOR-SAVING AND CONVENIENT: T-shaped handles can provide leverage, making reaming easier, stronger control, and easier turning.
  • effortlessly processing in sheet metal, plastic and other materials..
  • SIZE: 45#steel, 1/4” Handle 85mm Length + 128mm Length Reamer 3-13mm Reaming diameter range..
Check Stock

Lichamp Reamers Set for Metal Taper Reamer Drill Bit for Steel for 3/8 1/2 5/8 3/4 inches Hole M2 HSS Chucking Bridge Steel Reamers

  • Unique Tapered Reamer - Construction grade reamer set are used to align existing holes prior to bolt or rivet installation. Increased taper for ease in hole entry, especially for drilling holes bigger in pitman arm and steering knuckles..
  • M2 High Speed Steel - HSS M2 ensures sharp and fast execution in most hard steel material for clean results, while provides good wear resistance in mild steels and non-ferrous materials..
  • Wide Applications - Works well in free cutting and carbon steels, as well as soft, non-ferrous materials such as aluminum, brass and copper..
  • Five Grooves Fast Drilling - Reversed spiral push chips forward and are ideal for through-hole applications, reduces the friction, runs cooler, performs well in heat, corrosion and rust resistance..
  • Safe Straight Shank - Round shank with 3 flats to prevent slipping in the drill chuck, safety flange/ stop collar to prevent the reamer running through the hole..
Check Stock

HHIP 2006-0085 15/16-1-1/16\ High Speed Steel Adjustable Blade Reamer, 6 Blades, 9\ OAL, Size H

  • Straight flute reamers should be used in thru-hole applications only.
  • Blades are adjusted by loosening one nut and tightening the other.
  • Adjustable blades give the operator the ability to handle multiple hole sizes with a single tool.
  • Square end allows the user to turn the reamer by hand with an adjustable wrench or straight handle tap wrench.
Check Stock

PAGOW 1/2\ Hand Reamer, High Speed Steel H7 6 Straight Groove Reamer, Straight Flutes Hand Milling Cutter Tool

  • Premium Material: The material is low alloy steel with high hardenability and low hardenability. The reamer has the characteristics of high wear resistance, less severe cutting and less deformation..
  • Hand Reamer: Reamer for reaming holes have been drilled after processing (or reaming) on the workpiece, mainly to improve the precision of the hole, reducing its surface roughness, is finishing and semi-finishing tool for the hole..
  • Straight Flute Tool: 6 Flutes & Straight Shank. Allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts..
  • Application Object: Installed in the lathe for cutting of metal tools. Straight flute hand reamers is used in ferrous metals and most nonferrous metals. Designed for accurate reaming in aluminum, cast iron, copper, magnesium alloy, plastic, wood, etc..
  • Application: Good for general purpose applications, offering combination of hardness and toughness for wear resistance. Features just the base substrate without any additional treatment or coatings, suitable for wide ranges of applications..
Check Stock

High Precision Industrial Grade Spiral Reamer 1:10 Hss Steel, Conical Handle Hinge Hinged Die Processing Tool 8 X 12 X 40mm

  • Shank diameter: 3,4,5,6,7,8,9,10mm, machining hole size and shape can be suitable for different componets.
  • Features: The sawing edge of the reamer set of the chuck machine is sharp, the sawing ability is strong, the precision is high, and the sawing is clean.
  • Easy to use: Straight shank machine reamers can be installed on drilling machines, milling machines, etc.
  • Application: The H8 reamer set can process the surface of metal materials such as iron, steel, plastic, wood, copper, aluminum, etc.
  • Durable: The reamer set is made of high-speed steel, with high hardness, good toughness and long service life.
Check Stock

Mxfans High Speed Steel 29.5-33.5mm Slitting Dia Adjustable Hand Operated Reamer

  • Fit for A3 steel, alloy steel, cast iron, cast steel, aluminum and other metal materials, etc..
  • Functions:The reamer are used to remove the rotating tool that has been machined to the thin metal layer of the surface. The precise size and shape can be obtained after the hole is machined through the reamer..
Check Stock

uxcell 13.75mm-15.25mm Cutting Diameter HSS Adjustable Hand Reamer Milling Cutter

  • Cutting Hole Size : 13.75mm-15.25mm/ 7/13.
  • Square End Size : 6 x 6mm/ 0.2" x 0.2"(L*W).
  • Total Size : 160 x 14mm/ 6.2" x 0.5"(L*Max.D).
  • Package Content : 1 x Adjustable Hand Reamer.
Check Stock

Rannb Adjustable Hand Reamer Square End Hole Cutting Tool Adjustment Range 17-19mm

  • ⭐【Material】The Adjustable Reamer is made of premium HSS with good hardness and toughness..
  • ⭐【Square End】Square end allows the user to turn the reamer by hand with an adjustable wrench or straight handle tap wrench..
  • ⭐【How to Adjust】Blades are adjusted by loosening one nut and tightening the other..
  • After reaming the hole can get the exact size and shape..
  • ⭐【Applicable Material】A3 steel, alloy steel, cast iron, cast steel, aluminum and other metal materials..
Check Stock

Beer Tap Faucet Handle Black - Set of 10

  • WHAT WILL YOU GET - You will get a M3-M12 tap wrench. Fit 1/16" - 1/2" / 2.5mm - 12mm capacity size. Overall size(closed) is 19.3cm x 2.3cm x 1cm/7.6inch x 0.9inch x 0.4inch(LxWxH). Shank diameter is 8mm/0.3inch..
  • HIGH QUALITY TAP REAMER - The adjustable tap wrench is made of high-quality steel, with high hardness, strong wear resistance and long service life. The end of the tapping wrench tool is knurled for easy and firm grips. The hand wrench tool has one rigid handle and one adjustable jaws, which can easily and firmly clamp the tools..
  • MULTIPLE USE - The tap reamer wrench is designed for use with small tools that require manual rotation, such as taps, reamers, drill bits, and screw extractors. Manual operation is very simple and convenient, which can improve your work efficiency. It is also very suitable for DIY tapping..
  • EASY TO USE - When using a tapping wrench, apply even force with both hands. The wrench and the tap should form a 90-degree angle, and the tap and the threaded bottom hole are perpendicular to each other, rotate the adjustable metal tap handle reamer wrench in a certain direction..
  • QUALITY SERVICE - Thank you very much for your support. Piutouyar provides 30 days return and exchange service. Customer 100% satisfaction is our top pr....
Check Stock

YaeKoo 2 pcs Tapered Reamer T Handle 6 Fluted Chamfer Bridge Pin Hole Hand Held Reamer Sizes 1/8\-1/2\ (3-13mm) & 5''-5/8'' (5-16mm) Handle Drilling Tools

  • The Tapered Reamer is used to remove burrs from steel, brass, aluminum, plastic, wood and wall panels.
  • The T Reamers are Precisely machined cutting edges smooth the surface of the metal without effort.
  • Reamer T handle for easy reaming.The removable handle facilitates compact storage..
  • Material of Taper Reamers: high carbon steel heat treatment, longer service life.
  • Packing includes :2 pieces Bridge Pin Hole Reamers, 1/8" -1/2 "(3-13mm) size and 1/5" -5/8 "(5mm -16mm) size.
Check Stock

ABN Spark Plug Thread Repair Kit, 14mm Reamer Cylinder Thread Repair Tool & Thread Insert – Spark Plug Rethreader Kit

  • ...w it firmly into the newly tapped head.
  • Apply grease on the tap to help catch any metal shavings (rather than letting them drop into the cylinder) and back out the tap out every half turn to every whole turn to clean the metal shavings from the tap.
  • PERFECT SIZE: 14mm reamer with 12 points.
  • Use with 3/8-inch drive ratchet or wrench.
  • Inserts sizes are 3/8-Inch, 7/16-Inch, 1/2-Inch, and 3/4-Inch.
  • Tap is tapered to allow the tip to fit and rethread the hole in order for the coil to fit.
  • Measure your plug diameter, thread, and pitch to see if this kit is compatible.
  • PACKAGE CONTENTS: Rethread kit includes a tapping reamer and 4 different depths of inserts for your convenience.
Check Stock

QWORK 1/8\ - 1/2\ Tapered Straight Flute Handle Reamer T Handle Tapered Reamer Tool for Wood Plastic

  • High Quality - Made of premium 45# Steel, it is durable, stable and high strength. And the cutting edges is sharp for expanding the hole..
  • Function - It is an ideal way for reaming the hole in metal sheets and plastic without effort, which is not easy to drill..
  • Design - With removable T-handle, it can save you the power to reaming and control..
  • Specification - This reamer can expand hole of size from 1/8" to 1/2"..
  • 100% Satisfied Service - Enjoy a smooth & frustration free experience with our 100% Satisfied Service in one Month!.
Check Stock