Reviews Hole Reamer Tool

T Handle Tapered Reamer Tool 3-13mm(1/8-1/2 ), 6 Fluted Chamfer Bridge Pin Hole Handheld Chaser, 45# Steel 1/4\ Hex Shank Durable for Chamfering Taper Holes Countersink Latches Guitar

  • CHAMFER REAMING TAPER REAMER: 3-13mm (1/8-1/2) six-blade taper reamer, taper hole, chamfer deburring and other functions, convenient for screw sinking, convenient and quick..
  • PURPOSE 1: Removal of burrs: remove from wood, cut pipes, pipes and ducts. Internal deburring edge tool, the capacity is 1/8" to 1/2"..
  • PURPOSE 2: Enlarged bridge pin hole, headstock, hole for tuner and volume/tone knob.
  • LABOR-SAVING AND CONVENIENT: T-shaped handles can provide leverage, making reaming easier, stronger control, and easier turning.
  • effortlessly processing in sheet metal, plastic and other materials..
  • SIZE: 45#steel, 1/4” Handle 85mm Length + 128mm Length Reamer 3-13mm Reaming diameter range..
Check Stock

HHIP 2006-0085 15/16-1-1/16\ High Speed Steel Adjustable Blade Reamer, 6 Blades, 9\ OAL, Size H

  • Straight flute reamers should be used in thru-hole applications only.
  • Blades are adjusted by loosening one nut and tightening the other.
  • Adjustable blades give the operator the ability to handle multiple hole sizes with a single tool.
  • Square end allows the user to turn the reamer by hand with an adjustable wrench or straight handle tap wrench.
Check Stock

5/8 Drill Bridge/Construction Reamer with 1/2 Shank Chuck,HSS Taper Bridge Reamer Bit Tool for Steel Metal Wood Alloy to Align Existing Hole and Enlarge Hole

  • The heavy duty high-speed steel bridge reamer is also called construction reamers,it used for aligning an existing hole and enlarging undersized hole prior to bolt or rivet installation.Our reamer bit aligns and enlarges pre-drilled holes ready for bolting..
  • Makes reaming holes out extremely easier than using large drill bits,the reamed hole is smooth without tear-outs. But there must be a existing hole or a pilot hole that is smaller than 5/8" before using our 5/8" Bridge/Construction Reamer..
  • The tapered point design permits the reamer bit to enter into the overlapping holes of out-of-line,make the bolt holes line up.Enlarging the holes in the steering knuckles and pitman arm..
  • The 5/8" bridge reamer bit is not a drill bit,only aligning reamer to aligh holes which are pre-drilled.If you need to expand a hole to 5/8". At first there must be a 3/8" pre-drilled hole,then ream out to 5/8"..
  • Commonly used in bridge,construction,steel erection and automotive truck trailer industries,specially use in structural materials such as steel, metal, alloy aluminum,brass,plastic,iron,nickel,copper,cast iron etc.Three symmetrically placed flats on shank provide positive grip in portable electric and pneumatic tools..
Check Stock

Mxfans High Speed Steel 29.5-33.5mm Slitting Dia Adjustable Hand Operated Reamer

  • Fit for A3 steel, alloy steel, cast iron, cast steel, aluminum and other metal materials, etc..
  • Functions:The reamer are used to remove the rotating tool that has been machined to the thin metal layer of the surface. The precise size and shape can be obtained after the hole is machined through the reamer..
Check Stock

Sabo Lemon Citrus Reamer Juicer 4-in-1 Multitool with Zester Channel Knife Paring Knife for Cocktail and Bar

  • 4-in-1 MULTI TOOL: This multi tool features a lemon citrus reamer for juicing, a paring knife for cutting up lemons and citrus fruits, a channel knife and zester for peeling and garnishing. It is a handy bar tool for making cocktails, drinks, and garnishing along the way..
  • FOOD SAFE AND DURABLE: The citrus reamer is made with hard ABS plastic and is FDA compliant food safe. The paring knife and zester is made with sharp polished stainless steel and can last for a long time..
  • SAVE YOUR SHELF SPACE: For those who don’t want to have multiple tools hogging up your shelf space in your kitchen, this reamer combines multiple tools into one so you don’t have to look for each individual tool anymore..
  • JUST THE RIGHT SIZE: The reamer tool is 6″ long, and the reamer head is just the right size for the average citrus fruits like lemons and oranges..
  • DISHWASHER SAFE: The plastic reamer is dishwasher safe and very easy to clean..
Check Stock

Beer Tap Faucet Handle Black - Set of 10

  • WHAT WILL YOU GET - You will get a M3-M12 tap wrench. Fit 1/16" - 1/2" / 2.5mm - 12mm capacity size. Overall size(closed) is 19.3cm x 2.3cm x 1cm/7.6inch x 0.9inch x 0.4inch(LxWxH). Shank diameter is 8mm/0.3inch..
  • HIGH QUALITY TAP REAMER - The adjustable tap wrench is made of high-quality steel, with high hardness, strong wear resistance and long service life. The end of the tapping wrench tool is knurled for easy and firm grips. The hand wrench tool has one rigid handle and one adjustable jaws, which can easily and firmly clamp the tools..
  • MULTIPLE USE - The tap reamer wrench is designed for use with small tools that require manual rotation, such as taps, reamers, drill bits, and screw extractors. Manual operation is very simple and convenient, which can improve your work efficiency. It is also very suitable for DIY tapping..
  • EASY TO USE - When using a tapping wrench, apply even force with both hands. The wrench and the tap should form a 90-degree angle, and the tap and the threaded bottom hole are perpendicular to each other, rotate the adjustable metal tap handle reamer wrench in a certain direction..
  • QUALITY SERVICE - Thank you very much for your support. Piutouyar provides 30 days return and exchange service. Customer 100% satisfaction is our top pr....
Check Stock

Jiayouy 15 Pieces Violin Repairing Maintenance Tool Kit with Carry Bag Luthier Tools Violin Making Violin maintenance and violin making tool kit

  • Package content: 1* Peg Reels Shaver, 1* Edge Clamp Cracks Repair Tool , 3* Cam Clamp, 1* Bridge Clamp, 1* 5-16mm T - Handle Reamer 2* Bridges Reference Tool, 3 * Brass Violin Sound Post Setting, 2* 440hz +523hz Tuning Fork, 1* Fret Sanding Pen..
  • Violin Peg Reels Shaver with 4 reamer peg hole for 1/8 1/4 1/2 3/4 - 4/4 size violin peg..
  • Professional edge clamp for repairing cracks close to the edges of musical inrument. Violin Bridge Machine clamp helps fitting a bridge's feet to the violin / viola..
  • Come with a handy carrying case, zipper and handle design, easy to open and carry. No need to worry about missing small parts or messy Violin repair tools!.
  • The maintenance kit can help complete the most common Violin repairs and adjustments.Necessary tool for Violin lovers or maker..
Check Stock

CO2 Inflator and Tubeless Tire Repair Kit - Presta & Schrader Valve Compatible - Bicycle Tire Pump for Road and Mountain Bikes - No CO2 Cartridges Included

  • ...adapters needed! Simply drop the CO2 cartridge into the cup, screw on the head, attach to valve, slowly turn the lever to release air. So quick and easy you’ll be back to riding your bike in no time!.
  • 【Repair a Hole in Seconds】: This Tubeless tire repair kit contains essential tools. Besides the essential tire reamer and plug fork tools, this tubeless tire repair kit features a valve stem core removal tool that will allow you to remove the valve stem core and insert maximum, unrestricted air pressure to seat the bead and air up tire..
  • 【Easy and Quick Puncture Repair】: Our Tubeless tire repair kit works with a wide variety of tubeless tires, no tube tires - Mountain, Road, Hybrid, E-Bike, Cyclocross, Gravel Bikes and ATV. Storage canister neatly includes the needle (tire reamer and insertion tool), valve stem core removal tool, 5 rope plugs( 1.8mm thickness for little hole) and a Ball needle..
  • 【NOTE】: When you inflate you bike tire with CO2 inflator. CO2 cartridges are full of compressed air and can inflate flat tire in a matter of seconds with little effort. But please note that you'll more than likely find that your tire will be flat within 24 hours because CO2 will leak out of your tire faster than air. So don't forget to pump it up befo....
Check Stock

5/8 Bridge Reamer Bridge/Construction Reamer 1/2 Shank M2 HSS Taper Chucking Reamer Bit Tool for Steel Metal Alloy Wood Plastic Drilling Hole

  • Material: 5/8 bridge reamer is made of high-quality M2 HSS steel, with high toughness, high-temperature resistance, corrosion resistance and long service life. Compared to other commonly used low-grade high-speed steels, M2 has an increased content of tungsten and molybdenum, both key elements for improved durability.
  • Wide Application: HSS bridge reamers can enlarge or align existing holes and are suitable for various materials such as aluminum, brass, bronze, cast iron, copper, iron, metal, nickel, plastic, steel and other structural materials Note: It requires existing holes Or a pilot hole is required.
  • Size Infor: Length of chucking reamer is 6.5 inch.
  • Safe to Use: Designed with helical flutes and safety stops to keep chips away from the operator. The safety collar stops to prevent over-penetration and loss of operator stability.
  • Design: The tapered tip design allows the reamer to fit into unevenly overlapping holes, aligning the bolt holes. The 5/8" bridge reamer is not a drill, it just aligns the reamer with the pre-drilled hole.
Check Stock

17/32 HSS Hand Reamers, Spiral Flute, Right Hand Cut, Michigan Drill Series 565

  • Alloy Tool Steel Reamer: Hard and durable, reaches H8 level of drilling accuracy, and reduces surface roughness of workpieces.
  • Uncoated Tool: Features just the base substrate without any additional treatment or coatings, suitable for wide ranges of applications.
  • Hand Reamer: Reamer can be hand operated by use of wrenches and used for light cut, repair work, removing stock or simply for enlarging holes.
  • Straight Flute Tool: Allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts. Heat resistance, long service life.
  • Application: Designed for accurate reaming in aluminum, cast iron, copper, magnesium alloy, plastic, wood, etc..
Check Stock

ADJUSTABLE EXPANDING HAND REAMER 4 PIECE SET 1/4\- 3/8\ - NEW MICRO REAMER SET

  • Alloy Tool Steel Reamer: Hard and durable, reaches H8 level of drilling accuracy, and reduces surface roughness of workpieces.
  • Uncoated Tool: Features just the base substrate without any additional treatment or coatings, suitable for wide ranges of applications.
  • Hand Reamer: Reamer can be hand operated by use of wrenches and used for light cut, repair work, removing stock or simply for enlarging holes.
  • Straight Flute Tool: Allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts. Heat resistance, long service life.
  • Application: Designed for accurate reaming in aluminum, cast iron, copper, magnesium alloy, plastic, wood, etc..
Check Stock

KIMISS Boat Kill Switch, Single Engine Ignition Cut Off Switch with Keys 176408 Fit for Johnson BRP Evinrude Outboard

  • Non Slip: Using aluminum alloy handle, knurled cover treatment, non slip design, comfortable grip, easy to operate, light and durable punching reamer..
  • Wear Resistant: The steel reamer bit is stable and durable after heat treatment and machining, with high strength, wear resistance, good performance and long service life..
  • Widely Used: Ideal tool for RC model cars for drilling and trimming RC bodies. Suitable for different kinds of RC helicopters, airplanes, cars, boats, tanks, etc..
  • Ergonomic Design: The handle is ergonomically designed for a comfortable grip. Scissors for trimming RC car shell, compact and lightweight, the curved design of the tip makes you more effortless when using it..
  • Hole Saw Size: It can be drilled with a diameter of 0-14mm, with good toughness, no deformation, no scratches on the car shell, and a tight fit, saving your time and energy..
Check Stock

Lichamp Reamers Set for Metal Taper Reamer Drill Bit for Steel for 3/8 1/2 5/8 3/4 inches Hole M2 HSS Chucking Bridge Steel Reamers

  • Unique Tapered Reamer - Construction grade reamer set are used to align existing holes prior to bolt or rivet installation. Increased taper for ease in hole entry, especially for drilling holes bigger in pitman arm and steering knuckles..
  • M2 High Speed Steel - HSS M2 ensures sharp and fast execution in most hard steel material for clean results, while provides good wear resistance in mild steels and non-ferrous materials..
  • Wide Applications - Works well in free cutting and carbon steels, as well as soft, non-ferrous materials such as aluminum, brass and copper..
  • Five Grooves Fast Drilling - Reversed spiral push chips forward and are ideal for through-hole applications, reduces the friction, runs cooler, performs well in heat, corrosion and rust resistance..
  • Safe Straight Shank - Round shank with 3 flats to prevent slipping in the drill chuck, safety flange/ stop collar to prevent the reamer running through the hole..
Check Stock