Reviews Hole Enlarging Bit

Dremel 9904 Tungsten Carbide Cutter

  • Use on Hardened steel, fired ceramics and other hard materials.
  • Do not use for drilling or enlarging holes less than twice the diameter of the cutter to avoid carbide surface catching side of hole and breaking.
  • For best results insert bit in tool and back out slightly before tightening down to provide plenty of shank for the collect or chuck to hold the bit.
Check Stock

Dremel 9909 Tungsten Carbide Cutter,Silver

  • The product is 1/8" Diameter, Tungsten Carbide Cutter.
  • Shapes, smooths or grinds especially hard materials including: hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics and hard woods..
  • A high-speed cutter made of tungsten carbide, the hardest material next to diamonds..
  • Do not use this cutter for drilling holes or for enlarging holes that are less than twice the diameter of the cutter. The tungsten carbide surface can easily catch the side of a hole and break the bit..
  • For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto the bit..
Check Stock

Diamond Finger Milling Bits 1 Inch（25mm）for Enlarging and Shaping Holes Reshaping Milling Tool for Porcelain Tile Hard Ceramic Marble Stone Granite Counter Sink and More

  • Must Have Tool: Diamond Finger Milling Bit able to elongate, enlarge, and shape circular holes, drain holes in tiling projects in bathroom and kitchen to fit tiles perfectly around pipes, faucets, shower valves and more..
  • Designed for Tough Job: Work perfectly for enlarging or trimming holes in porcelain sink, limestone vanity sink top, ceramic bathroom sink, thick granite countertop, marble, stone,even quartz countertop, which is harder..
  • Time and Money Saver: when upgrade or replace the bathrooms faucets, you may find the faucets are a bit larger than the old ones. Use this Diamond Finger Milling Bit to enlarge the hole, you can save a lot of trouble and time..
  • High Quality: This diamond finger bit is heavily diamond coated, both sides and the end, as a result, it can grind wet or dry, no chips, scratches or bumps, make beautiful holes.
  • recommend to do some test holes in scrap to get the feel for it..
  • Easy to Use: 1 piece of 1 inch (25mm) Vacuum Brazed Diamond finger bit, hole depth up to 2 inch (50mm), with 5/8-11 Thread for most angle grinders.
  • please take your time and do not force the bit.
  • Use goggles, ear plugs, and vacuum with it..
Check Stock

Ring Sizer Adjuster for Loose Rings 6 Pack, 3 Sizer for Different Band Widths – Silicone Ring Size Adjuster , Mandrel for Making Jewelry Guard, Spacer, Ring Sizer

  • 9 inches long x 1 inches wide | 2 oz weight.
  • The Matt Wax Ring Filer makes enlarging the finger size of wax models much easier. This durable, hardwood mandrel is designed with a steel blade that runs the length of the handle to the tip on the tapered section..
  • Slide this mandrel through the hole of a wax ring or ring tube and gently rotate clockwise. As the blade turns, it scrapes the inner wall, enlarging the ring to the size that is marked along the mandrel, leaving a smooth and even finish on the ring..
Check Stock

IRWIN 1890945 Flexible Installer Drill Bit with High-Speed Steel Tip, 3/8-Inch Shank, 24-Inch Length

  • Unique combination of 135 Degree self-centering split point stepped to 118 Degree hole enlarging body for fast, easy starts and smooth drilling.
  • Hole in flute for easy wire pulling through walls, ceilings and floors.
  • 3-flatted shank prevents slipping in drill chuck and includes hole for wire pulling.
  • Tapered flute for faster chip ejection, less binding and smoother drilling Does not apply to 1/4" diameter SKUs.
  • Premium high speed steel construction for extended drilling life in metal, wood and plastic.
Check Stock

BestNest Classic Three-Woodpecker House

  • This home provides a wonderful roost to specific woodpeckers.
  • 2.5" diameter entry hole is perfect for red-headed, hairy, or red-bellied woodpeckers.
  • Metal guard around the entry prevents them from enlarging it.
  • All wood construction remains lovely and durable.
Check Stock

Plow & Hearth Kingsgate Cottage Lighted Birdhouse, White

  • This home provides a wonderful roost to specific woodpeckers.
  • 2.5" diameter entry hole is perfect for red-headed, hairy, or red-bellied woodpeckers.
  • Metal guard around the entry prevents them from enlarging it.
  • All wood construction remains lovely and durable.
Check Stock

BestNest Classic Three-Woodpecker Houses Pack of 2

  • Set of 2 homes provides wonderful roosting spots to specific woodpeckers.
  • 2.5" diameter entry hole on each is perfect for red-headed, hairy, or red-bellied woodpeckers.
  • Metal guard around the entry holes prevent other animals from enlarging them.
  • All wood construction remains lovely and durable.
Check Stock

Rannb Wood Auger Dill Bit Door Lock Installation Kit Door knob hole saw Door latch hole saw

  • 【Function】Used for larger lock hole and a auger bit for latch hole..
  • 【Accurately Drill】Pricise boring for door is assured with four edged hole saw and pilot drill bit..
  • 【Completed Kits】Cut type hole saw with a mandrel bit is for larger lock hole. Wood Auger Bit is for latch hole..
  • 【Package Content】1pcs x Hole Saw + 1pcs x Auger Bit + 1pcs x L Shaped Mandrel Bit.
  • 【Please Attention】This Door Lock Installation Kit is only used on wood doors..
Check Stock

Dremel 9910 Tungsten Carbide Cutter

  • The product is 1/8 Inch Diameter, Tungsten Carbide Cutter.
  • Do not use for drilling or enlarging holes less than twice the diameter of the cutter to avoid carbide surface catching side of hole and breaking.
  • Secure objects to a stable surface while working.
  • Use the sides of the cutter (rather than the tip) for effective cutting the tip cuts poorly and can break under pressure.
  • Use higher speeds for hard woods slower speeds for metals and very slow speeds for plastics.
Check Stock

6 PCS Metal Desk Grommet 2 Inch Zinc Alloy Desk Cable Wire Grommet Cord Wire Hole Cover Outlet Port Tidy Cable Hole Cover Organizers for 2 Inch Mounting Hole Diameter

  • Specification: Mounting hole diameter: 1.95 inch (50mm).
  • Height: 0.6 inch (15mm), Fits Hole Size: 2 inch..
  • Material: 2 inch desk grommet is made of zinc alloy.
  • surface drawing treatment which makes their appearance more elegant, and meet you any decoration requirements..
  • Easy to Install: Simply drill a hole in the surface and insert the grommet into the hole. Lined with nylon brush in the open to keep your cable and protect them from damage..
  • Removable Cover: The center cover can be removed completely enlarging the opening, you conveniently and easy to adjust the cable, easy to use which makes your desk tidy..
  • Wide Use: The desk hole cover is widely used in office, home, hotel, bank, etc. Organize wires and cables on office equipment, computer components, entertainment systems effectively..
Check Stock

Diamond Tile Drill Bits Ceramic Diamond Glass Drill Bit Set 5 Pack 2 Carbide Drill Bits Ceramic Tile Drill Bits 3 Porcelain Granite Drill Bits and Drill Guide for Diamond Tip Drill Bit for Bottles

  • Tungsten Carbide Drill Bit For Ceramic Tile Bits For Drill Holes In Clay Plant Pots For Drainage 3/16″ And 1/4″ Ceramic Drill Bits For Tile . Tungsten Carbide Drill Bits have Self Centering Point for Drilling Holes in Ceramic Tile Marble Travertine and Slate..
  • Diamond Drill Bits For Glass 3/16 In 1/4″ In 1/2 Inch Drill Bit For Glass Drill Set. glass Drill Bit For Bottles Half Inch Glass Drill Bit With Guide For Drilling Hole In Glass Bottles And Glass Blocks For Tree Lights. Keep These Glass Hole Saw Drill Bit For Drilling Glass Cool With Water For Extended Life..
  • For Best Results Use The Diamond Drill Bit For Porcelain And The Spear Point Ceramic Tile Bit To Drill Tile. Use Diamond Bit To Drill Glass And Carbide Tipped Drill Bits With Any Battery or Electric Drill Hole Cutter Bits Must Be Used Wet. Carbide Ceramic Tile Drill Bit Set Can Be Used Dry If No Heat Builds Up..
  • Whilst The Tungsten Tile Cutting Drill Bits Can Be Used As Porcelain Tile Drill Bit The Diamond Tile Drill Bit Will Drill Holes In Porcelain Tile Faster And Last Longer As Long As Diamond Cutting Tip Is Kept Cool. Remove Diamond Tipped Drill Bit From Tile Hole Every 10 To 15 Seconds And Dip Diamond Porcelain Drill Bit Into Cup Of Water, Also Spray Water Into Ceramic Tile Hole To ....
Check Stock

DT-DIATOOL Diamond Core Drill Bits Kit for Porcelain Tile Ceramic Marble Granite Concrete Hole Saw (19/28/35/45/51mm) + Finger Bits (20mm) + 2 Adapters

  • 【Specification】Totally 8pcs/box: 5pcs(19/28/35/45/51mm) drill bits + 1pc 20mm finger bit + 1pc hex shank adapter + 1pc M14 to 5/8"-11 adapter..
  • Drill bits: Diameter 19mm-51mm, 5/8-11 thread, total length 75mm(3 Inch).
  • Finger bit: Diameter 20mm, 5/8-11 thread, total length: 65mm. Workable length 50MM, Grit #50/60..
  • Hex adapter: 5/8"-11 male thread, 3/8" hexagon shank.
  • M14 adapter: 5/8-11 male thread to M14 female thread.
  • 【Application】Drills Bits for dry or wet drilling holes.
  • Finger Bits for grinding,enlarging or shaping holes on porcelain ceramic tiles, granite, masonry,marble,concrete,etc. Adapters change 5/8 Inch-11 thread to 3/8-Inch hexagon shank or M14 thread and allow your bits to fit a wider range of machines..
Check Stock