Reviews Hips Sheet

3PCS Creality Original Heat Bed Platform Sticker Sheet, Hot Bed Build Surface Tape 235x235mm for Creality Ender 3/Ender 3 pro/Ender 3 V2/Ender 3 V2 Neo/Ender 3 Neo/Ender 3 S1/3 S1 Pro/Ender 3X

  • Build sheet adheres to the hot bed to help the filament stuck during printing, while also helping remove the printed model afterward..
  • Compatible with ABS, PLA, HIPS, and another filament. Works with all FDM printer models..
  • Single sheet design installs more quickly and with fewer bubbles than tape or films..
  • Durable construction allows for multiple uses with either the same or different filament materials..
Check Stock

DMI Dry and Moist Heat Electric Heating Pad for Back Pain Relief, FSA and HSA Eligible, Muscle Aches, Arthritis and Sore Joints with 9ft Cord, Large 24.5 x 11"

  • HEATING PAD FOR BACK PAIN RELIEF HAS FOUR HEAT OPTIONS to find relief from pain and tension whether in the back, hips, legs, muscle cramps, period cramps or neck and shoulder tension with high, medium, low and warm settings.
  • HEATING PAD FOR NECK AND SHOULDERS FEATURES AUTO OFF for safe and secure use while sleeping, working or watching TV. The automatic shutoff timer turns the digital heating pad off after two hours of use.
  • LARGE HEAT PAD FOR PAIN RELIEF CONTOURS TO EVERY BODY PART with a stream of heat and a soft flexible plush cover for pain relief on the knees, shins, hips, shoulders, muscles, pregnancy pain and period cramps.
  • FOAM INSERT MOISTURE SHEET FOR MOIST HEAT is effective in providing deeper penetration of the tissue. Moist heat has the ability to change the tissue temperature rapidly and obtain a quicker result in healing and recovery.
  • ELECTRIC HEATING PAD HAS AN EXTRA LONG TANGLE FREE CORD that reaches up to 9 feet for comfortable use in any resting position.
Check Stock

Sanctuarie Designs Jeannie The Genie Plus Size Halloween Costume

  • Sexy & fabulous crush velvet jumpsuit with off the shoulder neckline.
  • Accessory styles & colors may vary. Shoes not included.
  • Approximate measurements: Lg – Chest:40″ Hips:52″ | 0x(XL)- Chest:44″ Hips:56″ | 1x- Chest:48″ Hips:60″ | 2x- Chest:52″ Hips:64″ | 3x- Chest:56″ Hips:68″ | 4x- Chest:60″ Hips:72″ | 5x- Chest:64″ Hips:76″ | 6x- Chest:68″ Hips:80″ | 7x- Chest:72″ Hips:84″ | 8x- Chest:76″ Hips:88″ | 9x- Chest:80″ Hips:92″.
  • Note: Our brand runs large! Refer to Sanctuarie Designs size chart – pictured left.
Check Stock

3 Pack 16'x16' (400mmx400mm) Square 3D Printing Build Surface Heat Bed with Adhesive for 3D Printers, Cuttable to Any Size

  • ...Cr-10 S4, Formbot T-rex, Wombot Modus 3D printer, Creatbot, Tevo Black Widow, and also can cut to any small size you want..
  • 【High Quality Material】High strength and heat resistance (up to 240°C) allows the 3D Printer surface to perform consistently in high temperature environments. The durability is similar PEI sheet but the price is much affordable than PEI. This hot bed sheet is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print. And this 3d build plate is also inherently flame resistant and low in smoke production..
  • 【Easy to Install and Remove】Thick 1mm building plates will not warp or bend under heat. It is used on top of your heated print bed and provides excellent results. Simply remove the 3M adhesive paper on back side then stick it on your heat bed. Or fix it just with clip around the edges. Print directly on to the building surface without the need for additional adhesives, tapes, or slurry..
  • 【Fully Compatibly】 This 3D Printer heatbed platform sheet allows for multiple uses with either the same or different filament material. Compatible with ABS, PLA, HIPS, PET+, brick, wood, and flexible (TPE) filaments. Reuse for multiple prints, just wipe down with isopropyl alcohol ....
Check Stock

MABIS Heating Pad for Pain Relief with 4 Heat Options & Moist Heat for Back Pain Relief FSA and HSA Eligible Neck and Shoulders Muscle Aches Arthritis Period Cramps 9ft Cord 14.5 x 12 Medium

  • HEATING PAD FOR BACK PAIN RELIEF HAS FOUR HEAT OPTIONS to find relief from pain and tension whether in the back, hips, legs, muscle cramps, period cramps or neck and shoulder tension with high, medium, low and warm settings.
  • HEATING PAD FOR NECK AND SHOULDERS FEATURES AUTO OFF for safe and secure use while sleeping, working or watching TV. The automatic shutoff timer turns the digital heating pad off after two hours of use.
  • LARGE HEAT PAD FOR PAIN RELIEF CONTOURS TO EVERY BODY PART with a stream of heat and a soft flexible plush cover for pain relief on the knees, shins, hips, shoulders, muscles, pregnancy pain and period cramps.
  • FOAM INSERT MOISTURE SHEET FOR MOIST HEAT is effective in providing deeper penetration of the tissue. Moist heat has the ability to change the tissue temperature rapidly and obtain a quicker result in healing and recovery.
  • ELECTRIC HEATING PAD HAS AN EXTRA LONG TANGLE FREE CORD that reaches up to 9 feet for comfortable use in any resting position.
Check Stock

3D Printing Build Surface, 3D Printer Heat Bed Platform Sticker Sheet, 12' x 12' Square with Premium Adhesive for CR-10 / CR-10S,Hictop CR-10, Hictop Hero d3 3D Printers 310x310MM (Pack of 4)

  • 【PACK of 4】Our 3D Printer build surface Platform Sticker Sheet are 12″ x 12″ (310mm x 310mm) square, fully matches heated bed on many popular 3D printers. Fits: Creality CR-10S/CR-10, Hictop CR-10, Hictop Hero d3, JG Aurora A5 and A5x, Artillery Sidewinder X1/X2, Folger Tech FT-5, Creative3D Elf CoreXY, SainSmart Coreception CoreXY, BIQU Thunder, ADIMLab Gantry, Wanhao D9 (300), Tenlog TL-D3 PRO, Sunlu S8, JGMaker Artist-D Dual Extruder, and also can cut to any small size you want..
  • 【High Quality Material】High strength and heat resistance (up to 240°C) allows the 3D Printer surface to perform consistently in high temperature environments. The durability is similar PEI sheet but the price is much affordable than PEI. This hot bed sheet is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print. And this 3d build plate is also inherently flame resistant and low in smoke production..
  • 【Easy to Install and Remove】Thick 1mm building plates will not warp or bend under heat. It is used on top of your heated print bed and provides excellent results. Simply remove the 3M adhesive paper on back side then stick it on your heat bed. Or fix it just with clip around the edges. Print directly on....
Check Stock

Delie by Fajas Colombianas Dprada Post-Surgical Butt Lift Shapewear w/ Side zipper 09001 (Cocoa, Large)

  • CHECK OUR SIZE CHART IN THE GALLERY BEFORE THE PURCHASE: Its highly recommended to measure your waist and hips to find your size. Size are: 3XS Hips 30-32" 2XS Hips 32-34" XS Hips 34-36" S Hips 37-38" M Hips 39-40" L Hips 41-42" XL Hips 43-44" 2XL Hips 45-46" 3XL Hips 47-48". You might think its too small, but if you chose your size properly it will fit..
  • Lightweight, smooth stretch fabric for everyday control.
  • Flat-out flattening thanks to a bonded tummy panel.
  • Seamless construction for a smooth look under clothes and a comfortable fit..
  • Fajas Disenos DPrada te ofrece fajas reductoras con control en el abdomen y la cintura. Nuestras Fajas Colombianas tienen un diseno ideal con costuras planas que no se marcan debajo de tu ropa preferida. Nuestras fajas para adelgazar pueden ser para uso diario o utilizadas como fajas postparto. Sirven tambien en el proceso de recuperacion como fajas post operatorias..
Check Stock

MARIAE FQ111 Fajas Colombianas Post Surgery Compression Garment Full Body Shaper for Women Cocoa M

  • YOU MUST CHECK OUR SIZE CHART IN THE GALLERY BEFORE THE PURCHASE: Its highly recommended to measure your waist and hips to find your size. XS Hips 32-34″ S Hips 35-37″ M Hips 38-39″ L Hips 40-41″ XL Hips 42-43″ 2XL Hips 44-45″ 3XL Hips 46-47″. You might think its too small, but if you chose your size properly it will fit. We have great videos with NOT SO OBVIOUS TIPS on how to put it on (click the LOGO above the title to find them). STRETCH IT!!!!.
Check Stock

Everbellus Women Sexy Faux Leather Leggings with Pockets Skinny Leather Pants Black Large

  • Please refer to size informations. (For color Black one: S fits Waist 25"-27"/ Hips 36".
  • 2XL fits Waist 32"-35"/ Hips 44". For color Black#2 one: S fits Waist 24"-26"/ Hips 34".
  • Features: Pull on elastic wide waistband. Medium tight waist, wrinkle-resistant, stretchy, soft, full-length, ankle-pleated and comfortable leggings with pockets. Tight fit through leg, super skinny leg opening..
  • Versatile: Polyurethane (faux) legging adds a charm and rock 'n' roll flair to your wardrobe. Black pants are easy to pair with T-shirts, fleeces or any garment..
  • Silhouette: Youthful and sexy style is good for ladies and girls. Figure-hugging creates a nice silhouette..
  • Occasion: This outfit is perfect for party, clubbing, fancy night outings, dinner date, Halloween cosplay or more fits..
Check Stock

MARIAE 9182 Fajas Colombianas Postparto Levanta Pompis Stage 2 Post Surgery Liposuction Compression Garment Butt Lifter Shapewear for Women Black L

  • YOU MUST CHECK OUR SIZE CHART IN THE GALLERY BEFORE THE PURCHASE: Its highly recommended to measure your waist and hips to find your size. XS Hips 32-34″ S Hips 35-37″ M Hips 38-39″ L Hips 40-41″ XL Hips 42-43″ 2XL Hips 44-45″ 3XL Hips 46-47″. You might think its too small, but if you chose your size properly it will fit. We have great videos with NOT SO OBVIOUS TIPS on how to put it on (click the LOGO above the title to find them). STRETCH IT!!!!.
Check Stock

MARIAE 9334 Colombian Postpartum Girdles Post Surgery Compression Garments After Liposuction Fajas Colombianas Postparto Abdominal Levanta Pompis for Women Black M

  • YOU MUST CHECK OUR SIZE CHART IN THE GALLERY BEFORE THE PURCHASE: Its highly recommended to measure your waist and hips to find your size. XS Hips 32-34″ S Hips 35-37″ M Hips 38-39″ L Hips 40-41″ XL Hips 42-43″ 2XL Hips 44-45″ 3XL Hips 46-47″. You might think its too small, but if you chose your size properly it will fit. We have great videos with NOT SO OBVIOUS TIPS on how to put it on (click the LOGO above the title to find them). STRETCH IT!!!!.
Check Stock

EMEM Apparel Women's Ladies Plus Size Queen Opaque Footed Tights Fashion Hosiery Stockings Olive 4X

  • Size B: Height 5'4"-5'6" / Weight 110-130 Lbs. Size C: Height 5'6"-5'8" / Weight 125-145 Lbs. Size D: Height 5'9"-6' / Weight 140-160 Lbs. Tall: Height 6'-6'2" / Weight 155-170 Lbs..
  • 1X: Hips 40"-50" / Height 4'11"-5'4" / Weight 150-195 Lbs. 2X: Hips 40"-50" / Height 5'1"-5'7" / Weight 180-230 Lbs. 3X: Hips 44"-55" / Height 5'4"-5'10" / Weight 215-265 Lbs. 4X: Hips 50"-60" / Height 5'7"-6' / Weight 250-300 Lbs. 5X: Hips 60"-70" / Height 5'4"-5'9" / Weight 300-335 Lbs. 6X: Hips 70"-80" / Height 5'3"-6' / Weight 335-400 Lbs. 7X: Hips 75"-85" / Height 5'3"-5'9" / Weight 400-450 Lbs. 8X: Hips 80"-85" / Height 5'6"-6' / Weight 450-500 Lbs..
  • Ultra soft with wide comfortable waistband.
  • Absolute opaque coverage excellent for year round use.
Check Stock

EMEM Apparel Women's Ladies Plus Size Queen Opaque Footed Tights Fashion Hosiery Stockings White 1X

  • Size B: Height 5'4"-5'6" / Weight 110-130 Lbs. Size C: Height 5'6"-5'8" / Weight 125-145 Lbs. Size D: Height 5'9"-6' / Weight 140-160 Lbs. Tall: Height 6'-6'2" / Weight 155-170 Lbs..
  • 1X: Hips 40"-50" / Height 4'11"-5'4" / Weight 150-195 Lbs. 2X: Hips 40"-50" / Height 5'1"-5'7" / Weight 180-230 Lbs. 3X: Hips 44"-55" / Height 5'4"-5'10" / Weight 215-265 Lbs. 4X: Hips 50"-60" / Height 5'7"-6' / Weight 250-300 Lbs. 5X: Hips 60"-70" / Height 5'4"-5'9" / Weight 300-335 Lbs. 6X: Hips 70"-80" / Height 5'3"-6' / Weight 335-400 Lbs. 7X: Hips 75"-85" / Height 5'3"-5'9" / Weight 400-450 Lbs. 8X: Hips 80"-85" / Height 5'6"-6' / Weight 450-500 Lbs..
  • Ultra soft with wide comfortable waistband.
  • Absolute opaque coverage excellent for year round use.
Check Stock