Reviews Hilti Concrete Saw

Hilti 3738Baseplate 36/S13 - DX 36

  • Available in different strengths: green/3 (light), yellow/4 (medium), red/5 (heavy).
  • Hilti cartridges are designed specifically for use with Hilti powder-actuated tools as part of a matched tolerance system.
  • .27 caliber short cartridges for use with DX 460, DX 351 and DX 36 powder-actuated tools.
  • For driving pins, studs, etc. into concrete and steel.
Check Stock

Hare Krishna Hare Rama

  • Not to be used in any type firearms. Use compatible with HILTI DXE37.
  • High performance in penetrate hollow block and concrete.
  • Power level is designated by the load level number marked on each box and also by the color of the box and the....
  • High quality powder loads, Includes 100 power loads per box.
Check Stock

Freeman PSSCP Pneumatic 3" Single Pin Concrete Nailer with Case

  • Construction Applications: Fasten wood, steel, or other thin metal to concrete walls, cement blocks, and poured concrete slabs fast and easy. Designed for heavy duty jobs such as basement renovations, garage updates, framing, plywood to concrete nailing, wire lathe installation, steel banding, decking, fencing, and subfloors..
  • Compatible Nails: Single concrete pins from 3/4" – 3" and 0.145" diameter, including Ramset and Hilti.
  • Built to Last: One piece hardened steel drive blade results in a durable pneumatic tool resistant to damage.
  • 10 Times Faster than Powder-Actuated Systems: Works with conventional air compressors, hoses and fittings. No powder or certifications required, and no need to pre-drill holes..
  • Ergonomic Body: Rugged but also lightweight and comfortable for extended use.
Check Stock

Bosch HS1912 1 In. x 18 In. Flat Chisel SDS-max Hammer Steel

  • For concrete removal, hard surface break up and chiseling.
  • Suitable for use on brick, concrete and loose stone.
  • Fits Bosch SDS-max hammers, competitive SDS-max driver hammers and Hilti hammers using TE-Y and TE-FY shanks (sold separately).
  • 1 In. chisel width and 18 In. long SDS-max shank.
Check Stock

Sabre Tools 10-Pack SDS Plus 3/16\ x 6\ Rotary Hammer Drill Bits, Carbide Tipped for Brick, Stone and Concrete

  • 3/16” x 4” x 6" SDS plus drill bit 10 pack set – Ideal for use with Tapcon concrete screws.
  • High quality SDS masonry hammer drill bits designed to work in masonry applications.
  • Compatible with all SDS Plus sized rotary hammer drills.
  • Bosch, DeWalt, Hitachi, Hilti, Makita, Milwaukee, etc..
  • SDS hammer drill bit feature 2-flute self-centering carbide tip ensuring fast cut speeds and MAXIMUM life.
  • Our SDS drill bits haExtended life – our concrete bits optimized design allows material to quickly exit the hole while allowing the concrete hammer drill bit to remain cool.
Check Stock

Diamond 4 inch Concrete Hole Saw Masonry Core Drill Bit Heavy Duty for Brick, Cinder Block Standard Shank Drilling Holesaw Tool

  • Durable 4 core drill bits for concrete, exactly 4 inches diameter. Tool Life: 7 to 10 holes in concrete. Not for Hammer or Impact drilling..
  • Concrete hole saw 4 inch with 2 inch depth of cut and standard 3/8 inch shank for standard cordless or electric drill. Not for hammer action.
  • 4 in concrete hole saw dry or wet use drilling holes in concrete block, brick, stones, basement walls, foundations, tile, marble, granite countertop, ceramic, porcelain.
  • Sintered diamond 4 in concrete core saw bits for concrete..
  • Diamond is sintered, not visible. Laser welded diamond concrete hammer core bit fits your standard drill. If abused, this hole saw will no last more than a few uses..
Check Stock

Sabre Tools 5/8\ SDS Plus Ground Rod Driver Bit for use with Rotary Hammer (5/8\ Ground Rod Driver)

  • 3/8" x 10” x 12" SDS Plus Drill Bit (Version 2) – long masonry hammer drill bit.
  • High quality SDS bit designed to work in masonry applications.
  • Compatible with all SDS Plus sized rotary hammer drills.
  • Bosch, DeWalt, Hitachi, Hilti, Makita, Milwaukee, etc..
  • SDS hammer drill bit feature 2-flute self-centering carbide tip ensuring fast cut speeds and MAXIMUM life.
  • Extended life – our concrete bits optimized design allows material to quickly exit the hole while allowing the concrete hammer drill bit to remain cool.
Check Stock

Sabre Tools 10-Pack 1/4 Inch x 6 Inch SDS Plus Rotary Hammer Drill Bits, Carbide Tipped for Brick, Stone and Concrete (1/4” x 4\ x 6\)

  • 1/4” x 4” x 6" SDS plus drill bit 10 pack set – Ideal for use with Tapcon concrete screws.
  • High quality SDS masonry hammer drill bits designed to work in masonry applications.
  • Compatible with all SDS Plus sized rotary hammer drills.
  • Bosch, DeWalt, Hitachi, Hilti, Makita, Milwaukee, etc..
  • SDS hammer drill bit feature 2-flute self-centering carbide tip ensuring fast cut speeds and MAXIMUM life.
  • Extended life – our concrete bits optimized design allows material to quickly exit the hole while allowing the concrete hammer drill bit to remain cool.
Check Stock

Sabre Tools 10-Pack 5/32 Inch x 6 Inch SDS Plus Rotary Hammer Drill Bits, Carbide Tipped for Brick, Stone and Concrete (5/32” x 4\ x 6\)

  • 5/32” x 4” x 6" SDS plus drill bit 10 pack set – Ideal for use with Tapcon concrete screws.
  • High quality SDS masonry hammer drill bits designed to work in masonry applications.
  • Compatible with all SDS Plus sized rotary hammer drills.
  • Bosch, DeWalt, Hitachi, Hilti, Makita, Milwaukee, etc..
  • SDS hammer drill bit feature 2-flute self-centering carbide tip ensuring fast cut speeds and MAXIMUM life.
  • Extended life – our concrete bits optimized design allows material to quickly exit the hole while allowing the concrete hammer drill bit to remain cool.
Check Stock

BOSCH HC5099 2 In. x 23-In. SDS-max Speed-X Carbide Rotary Hammer Bit for Concrete Drilling

  • UNIVERSAL: Fits all SDS-max hammers and Hilti hammers with TE-Y/TE-FY shanks.
  • DURABLE: Solid carbide head is ideal for drilling masonry and concrete.
  • RELIABLE: Stays sharper longer to drill more holes than competitors' bits.
  • ACCURACY: Centric tip guides bit through hard and reinforced concrete.
  • SPEED: Inclined side cutters have an aggressive edge for faster cutting.
Check Stock

Bosch HC5073 1-1/4 In. x 36 In. SDS-Max Speed-X Carbide Rotary Hammer Bit for Concrete Drilling

  • UNIVERSAL: Fits all SDS-max hammers and Hilti hammers with TE-Y/TE-FY shanks.
  • DURABLE: Solid carbide head is ideal for drilling masonry and concrete.
  • RELIABLE: Stays sharper longer to drill more holes than competitors’ bits.
  • ACCURACY: Centric tip guides bit through hard and reinforced concrete.
  • SPEED: Inclined side cutters have an aggressive edge for faster cutting.
Check Stock

BOSCH HC5091 1-1/2 In. x 21 In. SDS-max Speed-X Carbide Rotary Hammer Bit for Concrete Drilling

  • UNIVERSAL: Fits all SDS-max hammers and Hilti hammers with TE-Y/TE-FY shanks.
  • DURABLE: Solid carbide head is ideal for drilling masonry and concrete.
  • RELIABLE: Stays sharper longer to drill more holes than competitors' bits.
  • ACCURACY: Centric tip guides bit through hard and reinforced concrete.
  • SPEED: Inclined side cutters have an aggressive edge for faster cutting.
Check Stock

Sabre Tools 3/4 Inch x 39 Inch SDS Plus Rotary Hammer Drill Bit, Carbide Tipped for Brick, Stone, and Concrete (3/4\ x 37\ x 39\)

  • 3/4" x 37” x 39" SDS Plus Drill Bit – long masonry hammer drill bit.
  • High quality SDS bit designed to work in masonry applications.
  • Compatible with all SDS Plus sized rotary hammer drills.
  • Bosch, DeWalt, Hitachi, Hilti, Makita, Milwaukee, etc..
  • SDS hammer drill bit feature 2-flute self-centering carbide tip ensuring fast cut speeds and MAXIMUM life.
  • Extended life – our concrete bits optimized design allows material to quickly exit the hole while allowing the concrete hammer drill bit to remain cool.
Check Stock