Reviews High viscosity Lubricants

Klein Tools 56117 Premium Synthetic Wax Wire and Cable Pulling Lubricant, 1-Quart Squeeze Bottle

  • increased load-bearing capacity, beyond 800-1000% higher than most conventional compressor oils.
  • thick, high durability film strength to prevent metal to metal contact even in high operating temperatures conditions.
  • offers both high temp continuous operation capabilities and arctic grade - 50 F.
  • multi viscosity keeps fluid requirements at a minimum eliminating the need for lower or higher viscosity oils due to temperature range.
  • Works exceptionally well on rotary, vane, screw, and reciprocal air compressors in severe service with high compression temperatures and long operating hours.
  • High purity base oils with top tier detergent pack guaranteed sludge free operation and exceptionally clean equipment.
  • exceptional bearing protection eliminates bearing vibrations and polish.
  • dramatically prolongs component life far beyond ordinary lubricants.
  • Not recommended for breathing air pumping compressors, oxygen compressors, or LPG compressors fitted on natural gas pipelines..
Check Stock

ARP 100-9913 Bolt Kit (Ultra Torque lube1.0 oz.)

  • Protected valve train parts include: camshaft, lifters, valve springs, rocker arms, pushrods and distributor gear.
  • Contain high viscosity extreme pressure additives not found in today's conventional oils and lubricants.
  • Compatible with all petroleum, synthetic and blended engine oils.
Check Stock

(2 Pack) Petrol Gel Food Grade Equipment LubricantNSF (2/4 oz. Tube)

  • Authorized by USDA as a lubricant for Use where incidental contact with food may occur, USDA rated h-1, FDA approved.
  • Technical white grease, impervious to water, will NOT taint, operating temperature 0-185 degrees.
  • Petrol-gel is the purest of lubricants, made with odorless, tasteless high viscosity Index paraffin base oil.
  • Petrol-gel is compounded with appropriate food grade additives to meet the performance demands for all Recommended applications.
Check Stock

Tractor Maintenance Log Book: Tractor Repair ,Servicing and Maintenance Logbook| Routine Inspection Log For Farmers and Company (Volume 13)

  • Odorless, tasteless high viscosity Index paraffin base oil.
  • Technical white grease, impervious to water, will NOT taint.
Check Stock

Cannon Cannon-Fenske Routine Calibrated Viscometers, Size 100

  • For measurement of kinematic viscosity of transparent Newtonian liquids, particularly petroleum products or lubricants.
  • Meets ASTM D 445 and ISO 3104 requirements.
  • Specifications conform to ASTM D 446 and ISO 3105.
Check Stock

Cannon Cannon-Fenske Routine Calibrated Viscometers, Size 75

  • For measurement of kinematic viscosity of transparent Newtonian liquids, particularly petroleum products or lubricants.
  • Meets ASTM D 445 and ISO 3104 requirements.
  • Specifications conform to ASTM D 446 and ISO 3105.
Check Stock

Cannon Cannon-Fenske Routine Calibrated Viscometers, Size 200

  • For measurement of kinematic viscosity of transparent Newtonian liquids, particularly petroleum products or lubricants.
  • Meets ASTM D 445 and ISO 3104 requirements.
  • Specifications conform to ASTM D 446 and ISO 3105.
Check Stock

Cannon Cannon-Fenske Routine Calibrated Viscometers, Size 350

  • For measurement of kinematic viscosity of transparent Newtonian liquids, particularly petroleum products or lubricants.
  • Meets ASTM D 445 and ISO 3104 requirements.
  • Specifications conform to ASTM D 446 and ISO 3105.
Check Stock

ZuwaUSA Drill Powered Pump ¾” 8 GPM - Marine Grade Aluminum | Unistar-2001A (Drill not included)

  • CONNECTION: 3/4” NPT | Dry self-priming to 13 Ft. | Max temperature 200°F | Working pressure of 58 PSI | The 3/8” shank fits all common chucks for most drills.
  • FLUID VISCOSITY: 1 (water) to 20,000 cP (heavy gear oil) | Transports a wide range of liquids, including liquids containing solids, oils, and corrosives.
  • DRILL POWERED: ZUWAUSA heavy-duty drill powered pump is designed to work with rechargeable/electrical drills with a maximum speed of 3,000 RPM.
  • FLUID TRANSFERS: water, seawater, wastewater, diesel fuel, biodiesel, vegetable oils, gear, motor and heating oil, detergents, antifreeze, chemicals, cooling lubricants..
  • EXAMPLE APPLICATIONS: diesel / home heating oil, remote sludge transfer, gear box oil changes, domestic water supply, flooded basements, barrel emptying/filling, draining waste oil, sewerage disposal, fueling vehicles, car wash, draining aquariums, disposal of cooling lubricants, bilge pump, booster pump..
  • OTHER TERMS FOR THIS PRODUCT: Coolant purge pump, Water purge pump, Oil purge pump, Fluid purge pump, Drill pump, portable water pump, portable oil pump, portable coolant pump, Heating oil transfer pump.
Check Stock

MicroLubrol ATD Auto Top & Door Rubber Seal Lubricant Oil 30ml (2 oz. or 57 gm.)

  • INNOVATIVE DAUBER TOP allows for easy lubrication of foosball rods with no drip, no spray, and no mess..
  • 100% SILICONE ROD LUBRICANT formulated for use on most modern foosball tables. High viscosity, long lasting, advanced formula works great for both home and heavy duty commercial tables, without damaging the bearings and bumpers like oil based lubricants..
  • KEEPS TABLE TOP CLEAN. No need to use a rag or dirty your hands. The 2 oz. bottle comes capped with a precision dauber top that applies a thin, even layer of lubricant with no drip and no overspray, keeping the playing surface clean..
  • ENHANCES PLAY by reducing friction between the rod and the bearings, eliminating hesitation and increasing performance..
  • NON-TOXIC AND ODORLESS. Safe for the environment.100% Money-Back Guarantee. Made in the USA..
Check Stock

Starfire Premium Lubricants AW 32 Hydraulic Oil, 5 Gallon, Pail

  • Sinopec Antiwear Hydraulic Oil L-HM is a line of premium quality antiwear lubricants blended using selected and carefully refined high-quality mineral oils, combined with a multifunctional additive system and available in a wide viscosity range from ISO Grade 32 to 150. This line of oils has been designed to meet the requirements of major hydraulic pump manufacturers, and its applications include hydraulic systems used in industrial and marine applications as well as in mobile machinery..
  • Compare to: Mobil DTE 25, Shell Tellus S2 M 46, Exxon Humble Hydraulic 46, Texaco Rando HD 46, Chevron Rykon 46 Oil, Conoco Super 46 Hydraulic, Clarity 46 Hydraulic Oil, Nuto H 46.
  • Certifications: ISO 11158-HM, DIN 51524 Part 2, Cincinnati 70, Easton Vickers M-2950-S and I-286-S, Parker-Denision HF-0.
  • Oem equivalent part number: Cincinnati Lamb P-70, DIN 51524 Pt 2, Eaton Vickers M-2950S, Parker Denison HF-1.
Check Stock

Spot On FoosJuice 100% Silicone Foosball Rod Lubricant with Dauber Top Applicator - The Clean and Easy to Use Lube

  • INNOVATIVE DAUBER TOP allows for easy lubrication of foosball rods with no drip, no spray, and no mess..
  • 100% SILICONE ROD LUBRICANT formulated for use on most modern foosball tables. High viscosity, long lasting, advanced formula works great for both home and heavy duty commercial tables, without damaging the bearings and bumpers like oil based lubricants..
  • KEEPS TABLE TOP CLEAN. No need to use a rag or dirty your hands. The 2 oz. bottle comes capped with a precision dauber top that applies a thin, even layer of lubricant with no drip and no overspray, keeping the playing surface clean..
  • ENHANCES PLAY by reducing friction between the rod and the bearings, eliminating hesitation and increasing performance..
  • NON-TOXIC AND ODORLESS. Safe for the environment.100% Money-Back Guarantee. Made in the USA..
Check Stock

Sta-Lube Hydraulic & Jack Oil SL2552-32 Fl. Oz, Anti-Foam, Anti-Rust 20W Non-Detergent Oil

  • This item does NOT ship to residential, home business or farm addresses, please scroll down to confirm shipping details prior to purchase..
  • Sinopec Antiwear Hydraulic Oil L-HM is a line of premium quality antiwear lubricants blended using selected and carefully refined high-quality mineral oils, combined with a multifunctional additive system and available in a wide viscosity range from ISO Grade 32 to 150. This line of oils has been designed to meet the requirements of major hydraulic pump manufacturers, and its applications include hydraulic systems used in industrial and marine applications as well as in mobile machinery..
  • Certifications: ISO 11158-HM, DIN 51524 Part 2, Cincinnati P69, Easton Vickers M-2950-S and I-286-S, Parker-Denision HF-0.
Check Stock