Reviews High viscosity Bonding

EDSRDXS UV Bonding & Welding Glue Kit UV Super Bonding Soft & Hard Glue with Black Light, Quick-Drying for Bonding Glass, Metal, Plastic 2 Pack Each 0.7oz (20ml x 2pack)

  • LIQUID PLASTIC BONDING KIT：EDSRDXS UV bonding glue contains two selected bonding function UV glue (soft & hard), each of which is 0.7 oz, 20ml. It is a low-viscosity, high-strength and UV-curable modified acrylate adhesive..
  • UV super bonding soft glue can still maintain a certain degree of toughness (can maintain a small degree of bending) after bonding. It is specially used for laminating PC, PMMA, PET, PS (excluding PP), and is also suitable for laminating plastic, glass, and metal. combine. UV super viscous hand feeling glue has a viscosity of 450-550 CPS and is a colorless transparent liquid. It can withstand extreme temperatures from -22°F to 275°F (-30°C to 135°C). Under pen light, it cures within 30-40 seconds and remains transparent, never yellowing..
  • UV super bonding hard glue is transparent light yellow liquid, excellent for bonding between glass and metal, glass and glass. It has a special engineering viscosity of 300 to 400 CPS, which provides better adhesion on relatively narrow fracture surfaces. This glue can work at extreme temperatures ranging from -40°F to 194°F (-40°C to 90°C). It can be cured within 60s under the irradiation of....
Check Stock

Titebond 1415 III Ultimate Wood Glue, 32-Ounce Bottle, 2 Pack

  • 【Wide application】Suitable for bonding Wood, Oak, Board, Table, Chair, Furniture, Wooden Product, Wooden Crafts, Wooden Furniture, Wood edge, etc. Can be used for bonding between wood and wood, wood and other materials, such as wood and metal, wood and rubber, wood and plastic. The wood glue is transparent and colorless, very durable. It is very suitable for making bonding crafts, diy, daily object repairing, etc. Glue is suitable for all kinds of uneven, rough and vertical surfaces..
  • 【Super viscosity】Glue for Furniture - Unique instant bonding performance, which can bond any wood such as oak, wooden product, wooden crafts, wooden furniture, wood edge within a few seconds. This is the most effective and economical adhesive. Other glues are only short-lived or even non-sticky, but our metal glue can always remain viscous to make your furniture, models, crafts stable and beautiful..
  • 【Super viscosity】Glue for Furniture - Unique instant bonding performance, which can bond any wood such as oak, wooden product, wooden crafts, wooden furniture, wood edge within a few seconds. This is the most effective and economical adhesive. Other glues are only short-lived or even non-sticky, but our metal glue can always remain viscous to make your furniture, ....
Check Stock

West System 105A Epoxy Resin (32 fl oz) Bundle with 206A Slow Epoxy Hardener (7 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • ...2 fl oz), 206A Slow Epoxy Hardener (7 fl oz), and 300 Mini Pumps Epoxy Metering Pump Set (3-Pack).
  • WEST SYSTEM EPOXY: Based on 105 Epoxy Resin, West System Epoxy is a versatile low-viscosity epoxy system. It is used for boat building, composite construction and repairs that require high-strength, waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • FIVE-PART RESIN TO ONE-PART HARDENER RATIO: When combined with 105 Resin in a five-part epoxy resin to one-part hardener ratio, this cured resin/206 Slow Hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and barrier coating properties. The West System 206 Slow Hardener is not intended for clear coating.
  • GENERAL COATING AND BONDING APPLICATIONS: The 105/206 Epoxy Mixture is used for general coating and bonding applications whe....
Check Stock

West System 105B Epoxy Resin (126.6 fl oz) Bundle with 206B Slow Epoxy Hardener (27.5 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • ...l oz), 206B Slow Epoxy Hardener (27.5 fl oz), and 300 Mini Pumps Epoxy Metering Pump Set (3-Pack).
  • WEST SYSTEM EPOXY: Based on 105 Epoxy Resin, West System Epoxy is a versatile low-viscosity epoxy system. It is used for boat building, composite construction and repairs that require high-strength, waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • FIVE-PART RESIN TO ONE-PART HARDENER RATIO: When combined with 105 Resin in a five-part epoxy resin to one-part hardener ratio, this cured resin/206 Slow Hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and barrier coating properties. The West System 206 Slow Hardener is not intended for clear coating.
  • GENERAL COATING AND BONDING APPLICATIONS: The 105/206 Epoxy Mixture is used for general coating and bonding applications whe....
Check Stock

Akfix - GA055 705 Fast Adhesive CA Glue (0.7 oz.) with Activator (3.38 fl oz.) [Clear Super Glue Adhesive and Accelerator Spray]

  • An adhesive set which consists of high viscosity cyanoacrylate adhesive and activator.
  • High bonding strength especially suitable for the applications where cure speed needs to be accelerated.
  • It is particularly suited to bonding difficult substrates which have a porous or uneven nature since it increases bonding strength by preventing the adhesive to be absorbed by the surface.
  • It is suitable for the bonding of a very wide range of materials, including acidic surfaces and some porous ones, where rapid bonding times are required.
  • Suitable for MDF, wood, chip wood, rubber, most plastics, leather and other common substrates.
Check Stock

Akfix 2-Pack 400ml 705 Fast Adhesive CA Glue (3.50 oz.) with Activator (13.50 fl oz.) Clear Super Glue Adhesive and Accelerator Spray - 2 Pack

  • An adhesive set which consists of high viscosity cyanoacrylate adhesive and activator.
  • High bonding strength especially suitable for the applications where cure speed needs to be accelerated.
  • It is particularly suited to bonding difficult substrates which have a porous or uneven nature since it increases bonding strength by preventing the adhesive to be absorbed by the surface.
  • It is suitable for the bonding of a very wide range of materials, including acidic surfaces and some porous ones, where rapid bonding times are required.
  • Suitable for mdf, wood, chip wood, rubber, most plastics, leather and other common substrates.
Check Stock

West System 105A Epoxy Resin (32 fl oz) Bundle with 205A Fast Epoxy Hardener (7 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • ...2 fl oz), 205A Fast Epoxy Hardener (7 fl oz), and 300 Mini Pumps Epoxy Metering Pump Set (3-Pack).
  • WEST SYSTEM EPOXY: Based on 105 Epoxy Resin, West System Epoxy is a versatile low-viscosity epoxy system. It is used for boat building, composite construction and repairs that require high-strength, waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • PRE-WARM THE RESIN AND HARDENER: Cold temperatures increase an epoxys viscosity, making it harder to dispense, mix and apply. Warming resin and hardener reduces their viscosity, so they flow easily through their dispensing pumps. To pre-warm, place the resin and hardener containers under a warming lamp or in a warm-water bath. Pre-warmed resins and hardeners will not cling as much to your mixing equipment.
  • FIVE-PART RESIN TO ONE-PART HARDENER RATIO: Mix 205 Fast Epoxy Ha....
Check Stock

TotalBoat FlexEpox Flexible Epoxy Adhesive 8 Ounce

  • 8 ounce kit. Two-part flexible epoxy adhesive produces permanent, structural bonds with high flex tolerances.
  • Easy 1:1 mix ratio, long working time, and fast cure time for reliable results—every time..
  • Waterproof bonding of wood, metal, fiberglass, glass, most plastics, stone, and masonry..
  • Can be used in cooler temperatures, on damp surfaces, and can even cure underwater..
  • Ideal viscosity for bonding joints or wetting out fiberglass fabric and tape to create flexible laminates. SIZE: 8 OUNCES.
Check Stock

West System 105B Epoxy Resin (126.6 fl oz) Bundle with 205B Fast Epoxy Hardener (27.5 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • ...l oz), 205B Fast Epoxy Hardener (27.5 fl oz), and 300 Mini Pumps Epoxy Metering Pump Set (3-Pack).
  • WEST SYSTEM EPOXY: Based on 105 Epoxy Resin, West System Epoxy is a versatile low-viscosity epoxy system. It is used for boat building, composite construction and repairs that require high-strength, waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • PRE-WARM THE RESIN AND HARDENER: Cold temperatures increase an epoxys viscosity, making it harder to dispense, mix and apply. Warming resin and hardener reduces their viscosity, so they flow easily through their dispensing pumps. To pre-warm, place the resin and hardener containers under a warming lamp or in a warm-water bath. Pre-warmed resins and hardeners will not cling as much to your mixing equipment.
  • FIVE-PART RESIN TO ONE-PART HARDENER RATIO: Mix 205 Fast Epoxy Ha....
Check Stock

3M Scotch-Weld Urethane Adhesive 3535, Off-White, Part B/A, 2 fl oz kit

  • 3M 590 Polyurethane Glass Adhesive Sealant is a one-part, high-viscosity polyurethane sealant intended for use in structural glass bonding and window glazing applications in automobiles..
  • The high-viscosity formula was specifically designed to meet the unique demands of structural glass bonding. It maintains flexibility after being cured, is crack resistant, and expands/contracts with the surrounding temperature, resulting in a bond that is long-lasting and is resistant to the elements and vibration fatigue..
  • A 25 to 40 minute skin time provides ample opportunity to complete installation and a 3-hour drive away time will ensure unnecessary space isn’t taken up in your shop by completed projects..
  • The versatile formula can also be used to bond a variety of substrates such as glass, acrylic, polycarbonate, and many more materials. Perfect for applications such as structural windshield installations, PMMA windshield applications, hard-to-bond polycarbonates/acrylics, and installing flush mounted glass for marine or automotive use..
  • Drive-Away Time: 3 hours. Skin Time: 25 to 40 minutes. Requires a manual or pneumatic applicator for use..
Check Stock

Capelli Lucenti 100g 7200 Pcs Italian Keratin Clear Granule Beads Hair Extension Keratin Glue Granule Pellet Granule Bead Hot Fusion Extensions Hot Melt Keratin Glue Tips for Hair Extension

  • ✅ PACKAGE: The package includes 1 box of 100 g hair extension keratin glue granules, which contains about 7200 pieces. They can be applied with fusion iron connector, hair extension iron, pre-bonding hair, good for hair extension or nail extension, the abundant quantity is enough for you to use and replace.
  • ✅ CAN BE USE: Can be used to bonding extensions and make micro link extensions, hot melt keratin glue tip is good viscosity resin, with strong adhesion effect..
  • ✅ STRONG AND SAFE: This hot keratin glue tip is a good viscosity resin, with a strong adhesion effect, there is no carbonation in continuous use, aging resistance, less wire drawing, no odor..
  • ✅ EXCELLENT PERFORMANCE: These granule beads are made from quality EVA, which is safe for use on the hair, they can melt and flow at high temperatures of 270 to 340 degrees Fahrenheit, you can use our product to create various hairstyles..
  • ✅ VARIETY USAGE: These granule beads are good for bonding heat-sensitive materials, not only can be applied for grafted wigs, but also for manual, accessories, shoes, wood products, ceramics, toys, cardboard boxes, and more..
Check Stock

20g Craft,Model Glue Instantly Strong Adhesive for DIY Craft Model Scrapbooking Doll Block Card Making Photo Toy Decor Crystal Dries Clear Wrinkle Resistant Flexible Crack Resistant

  • 【Wide application】Suitable for bonding DIY craft, Lego, Scrapbooking, Doll, Toy Brick, Card Making, Photo, Toy, Model, Decor, Crystal. Can be used....
  • 【Super viscosity】Unique instant bonding performance, which can bond any DIY Craft, Scrapbooking, Card Making, Photo, Toy, Model, Decor, Crystal....
  • 【Precision Tips】Each glue comes with two to three precision tips. Provides more choices in application! Get better accuracy, freedom, and control....
  • 【What You'll Get】20g Clear Safe and Quick-drying craft glue and Lifetime Technical Support, backed by 24/7 friendly customer service. The unique....
Check Stock

Akfix 710 Stone and Marble Fast Adhesive (1.76 oz.) with Activator (6.70 fl. oz.) [Clear Super Glue Adhesive and Accelerator Spray]

  • Developed especially for bonding materials such as natural stone, marble, granite and decorative stones.
  • Bonds rapidly in seconds with high bonding power.
  • Thanks to its high viscosity formula, it can be used in vertical places without pour and splash.
  • Activator makes it possible and incredibly fast to bond even porous surfaces.
  • May cause staining on marble and granite, especially white stones.
Check Stock