Reviews High temperature Oxygen Analyzer

Invacare Check O2 Plus Oxygen Analyzer, Prescription Required, IRC450

  • Three measurements rolled into one oxygen analyzer for ultimate convenience.
  • oxygen purity, flow rate and outlet pressure.
  • Two AA batteries provide over 16,000 readings.
  • Protective boot helps increase product integrity.
Check Stock

Vibrometer Digital Split Type Vibration Meter LCD Displays Acceleration Sensor Gauge Handheld Vibration Analyzer Grey

  • TWO TEMPERATURE UNITS: It can measure the environment temperature with 2 temperature units (℃ and ℉), temperature measurement 0℃ - 60℃, temperature accuracy is ±2℃.
  • MEASURING RANGE: Digital vibration tester has wide measurement range of acceleration: 0.1~199.9m/s2 peak, vibration acquisition is piezoceramic accelerometer.
  • FUNCTION: Vibration gauge analyzer adopts piezoelectric acceleration transducer transfer the vibration signal in to electrical signal, analyze the input signals, and show the vibration speed, acceleration, displacement, can meet your different using need.
  • LCD DISPLAY: Vibrometer gauge LCD displays measurement result and conditions directly, three and a half digit display, clear display for easy reading.
  • APPLICATION: Vibration analyzer tester is widely used in mechanical manufacturing, electric power, chemical engineering, space flight and aviation and other fields.
Check Stock

RCYAGO Dissolved Oxygen Meter with Electrode Filling Fluid

  • Dissolved oxygen meter is a precision instrument for measuring dissolved oxygen and temperature. The dissolved oxygen probe is a thin film with a polarographic sensor and a thermistor for temperature measurement and temperature compensation. The permeable membrane separates the measured solution from the sensing electrode but allows oxygen to pass through the membrane to react, and the concentration can be measured..
  • Dissolved oxygen refers to the concentration of molecular oxygen dissolved in water, generally expressed in mg/L (ppm) and saturation percentage (%), which is the percentage of dissolved oxygen in 1L of water. The oxygen concentration of our dissolved oxygen meter is 0.0-40.0mg/L, most of the range of dissolved oxygen meters on the market is 0.0-20mg/L. When measuring and calibrating, needn't open the protective cover of the electrode, just put the electrode in the solution for measurement..
  • Detachable probe, easy to replace, equipped with 6 probe protective covers and anaerobic water calibration powder. The film inside the protective cover cannot be taken apart. After using it for a period of time, the test value is inaccurate and the calibration is still inaccurate, and the membrane sleeve needs to be replaced..
Check Stock

RCYAGO Portable Dissolved Oxygen and Temperature Meter, DO Range: 0-40.00 mg/L, 0.1 mg//L Resolution, Digital Dissolved Oxygen Meter with Electrode Filling Fluid (No Backlight)

  • Dissolved oxygen meter is a precision instrument for measuring dissolved oxygen and temperature. The dissolved oxygen probe is a thin film with a polarographic sensor and a thermistor for temperature measurement and temperature compensation. The permeable membrane separates the measured solution from the sensing electrode but allows oxygen to pass through the membrane to react, and the concentration can be measured..
  • Dissolved oxygen refers to the concentration of molecular oxygen dissolved in water, generally expressed in mg/L (ppm) and saturation percentage (%), which is the percentage of dissolved oxygen in 1L of water. The oxygen concentration of our dissolved oxygen meter is 0.0-40.0mg/L, most of the range of dissolved oxygen meters on the market is 0.0-20mg/L. When measuring and calibrating, needn't open the protective cover of the electrode, just put the electrode in the solution for measurement..
  • Detachable probe, easy to replace, equipped with 6 probe protective covers. The film inside the protective cover cannot be taken apart. After using for a period of time, the test value is inaccurate and the calibration is still inaccurate, and the membrane sleeve needs to be replaced..
  • Adopts the digital screen display, which is more clear and convenien....
Check Stock

Mini Oxygen Torch Kit, Micro Oxygen Acetylene/Butane Gas Welding Torch with 5pc Tips for Jewelry Repair

  • ... 【Micro Torch】Micro oxygen torch with 2M long trachea to realize various requirements of cutting ,welding/soldering work,easy to use. Dual connectors , mix oxygen with propane/ acetylene/ butane to get strong welding torch..
  • 【Temperature】Max. Temperature can reach 1700°C (3092°F). with this temperature,can easily melt/cut metals iron, gold, silver and copper..
  • 【Widely Application】Suitable for welding kinds of precision product, such as goldsilverK goldplatinumpalladium pperlead tin alloy and some other crafts.such as welding, jewelry repair and construction, crafts, metal sculpture, glass blowing, and electronics repair and manufacturing..
Check Stock

RF Explorer Digital Handheld Spectrum Analyzer 6G Combo Plus - Slim

  • ...trength and the high quality baked varnished paint provides a unique glossy finish. The device is designed and manufactured to last many years of demanding usage in the field, with internal rechargeable Lithium battery for hours of continuous usage..
  • [Advanced features] – Included advanced high-resolution Spectrum Analyzer mode, WiFi Analyzer mode, Tracking SNA. Internal firmware is continuously updated with additional features and functions to improve the device capabilities..
  • [Free Computer software] - When connected to a Windows, Linux or Mac computer the analyzer can display advanced high resolution graphics, including Power Meter and Spectrum Analyzer real time charts, historical charts, save data to CSV files and export to other tools such as WW6 or MatLab, define markers and limit lines and much more. Free open source API and libraries are available to customize your own applications and services..
  • [Tracking mode enabled] – When combined with RF Explorer Signal Generator the analyzer can perform full tracking SNA to define Gain, Attenuation and SWR for 1 and 2 port RF devices such as filters, amplifiers and antennas..
Check Stock

Fencia Digital Body Fat Analyzer Body Fat Measurement Tool Portable Fat Analyzer Health Monitor Fat Scale Fat Monitor Device Easy to Use

  • HANDHELD PORTABLE DESIGN--This is an electronic body fat monitor with 3" LCD graphic display powered by 2xAA batteries(not included). Ergonomic,....
  • EASY TO OPERATE--User is required to hold device, and to to input his/her height, weight, age, and gender, then the device will measure and then....
  • ADJUSTABLE INTENSITY--This fat analyzer device has many speed strength levels, which allow you to get the right and appropriate amount of pressure to....
  • LARGE CAPACITY--Since the analyzer has nine personal file memories built in, each member of your family or team can track their individual..
  • UNIVERSAL DESIGN--Suitable for the both men and women. Temperature & Humidity of Usage: 10~40 C, 30%~85RH.
  • Temperature & Humidity of Storage: -20~60....
Check Stock

HUIXINLIANG Oxygen Tester Portable Dissolved Oxygen Meter,0.0~199.9% Dissolved Oxygen Degree% Range Oxygen Analyzer Meter,Probe Portable Dissolved Oxygen Meter Water Oxygenator,Easy to Carry

  • Automatic temperature compensation range: 0 ~ 40 ℃.
  • Response time: 003c30s (20 ℃ when the 90% response).
  • Dissolved oxygen Measurement range: (0 ~ 20) mg/L.
  • Dissolved oxygen Basic error: + / - 0.3mg/L.
  • Product Overview: The instrument can be divided into two parts: sensor and electronic unit. The sensor film type polarographic oxygen electrode. The electronic unit is composed of a high integrated circuit. Instrument using dot matrix liquid crystal display, can display dissolved oxygen value and temperature..
Check Stock

Denso 2344256 OXYGEN SENSOR

  • High Quality: A ABIGAIL Oxygen Sensor Features double protection layer, aluminum oxide trap layer, PTFE filter and stainless steel housing..
  • Interchange Part No.: A ABIGAIL Oxygen Sensor is Compatible with Bosch 15284 Denso 234-4668. This sensor will meet or exceed OEM standards, it is a direct replacement though it is NOT a genuine part..
  • Function:Lambda sensor can improve engine efficiency performance and fuel economy, reduce CO2 and other harmful emissions, extend expensive Catalytic ..
  • Performance: The metal shroud doesnot look as shiny as other Oxygen Sensors. Because it is made of SUS310 high temperature resistant material. And every single item is heated at 1562℉. The high temperature also mskes it stands wear and tear..
  • One Year Unlimited Warranty. Please use the Year & Make & Model drop down bar and check the wire length & plug & position to confirm the compatibility before placing orders. Please check your part pictures with our pictures, it must be completely same. Or it will not fit your car. It will save your time and cost. If you have any questions or the items you received with problems, contact us directly, we'll provide you with some professional suggestions within 24 hours..
Check Stock

USB Logic Analyzer Device with USB Cable 5MHz 24MHz 8CH 8 Channel UART IIC SPI Debug Logic Analyzer Professional Microcontroller Device Network Analyzing Set for Ardu-ino FPGA ARM M100 SCM

  • Logic analyzer is a waveform test device similar to an oscilloscope. It collects specified signals and displays them to developers through graphics or data statistics. Developers use these graphical timing signals to analyze hardware or software errors in accordance with the protocol..
  • Logic analyzer is an indispensable device in design. It can quickly locate errors, find and solve problems, especially when analyzing timing, such as 1wire, I2C, UART, SPI, CAN and other data, the application of logic analyzer to solve problems is very fast..
  • Plug the DuPont cables into the logic analyzer interface one by one. After the DuPont cables are inserted, they will be divided into 2 rows. The upper row of 5 logic analyzers corresponds to the silk screen on the left side of the shell, and the bottom one row corresponds to the silk screen on the right. Before testing the signal, please connect the GND channel of the logic analyzer to the GND pin of the board, otherwise the measured data will be unreliable..
  • If the logic analyzer works at 24M, the USB device must not only provide a 24M communication rate, but also must ensure that other devices occupy USB resources before the 4 buffers are filled. For these reasons, the logic analyzer cannot always work at the sampl....
Check Stock

NanoVNA V2 3G Vector Network Analyzer Metal Shell Touch Screen 2.8 Inch Antenna Analyzer 50KHz~3GHz Shortwave HF VHF UHF Standing Wave Spectrum Analyzer

  • 3G upgrade version: NanoVNA V2 vector network analyzer measuring frequency range is 50KHz~3GHz. The network analyzer is based on the design of OwOComm, adopts a 2.8-inch TFT LCD touch screen display, optimizes the appearance design, battery capacity and internal configuration, and is equipped with high-performance calibration kits and packaging accessories, so as to develop and produce an easier vector network analyzer to carry and use..
  • Large-capacity battery and stylus: The antenna analyzer's 1950mAh large-capacity battery has longer standby time and durability compared to the previous model. Equipped with a resistive screen stylus, which greatly improves the situation of poor touch and inaccurate click on the screen..
  • Metal shell: NanoVNA V2 3GHz is made of high-quality metal materials, which can fully protect the internal precision circuits, practical, easy to operate, and long service life..
  • Easy to carry: Vector network analyzer is equipped with EVA outer packaging, which is easy to carry and store, practical, and has a long service life. If you have any questions, please contact us in time, we are willing to help you solve the problem..
  • Good amplitude and phase stability: 2 customized high-performance SMA RF cables provide good amplitude and phase....
Check Stock

Portable TinySA Spectrum Analyzer, SEESII Upgraded V0.3.1 Tiny Frequency Analyzer with Antenna SMA Male to UHF Female Cables, 100kHz to 960MHz MF/HF/VHF UHF Input, 2.8'' Touchscreen Signal Generator

  • 【Frequency Range 】Tiny Spectrum Analyzer with two inputs, high quality MF/HF/VHF input for 0.1MHZ-350MHz, lesser quality UHF input for 240MHz-960MHz. Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz. Color display showing 290 scan points covering up to the full low or high frequency rangefrequency range. The tinySA contains all the components of a conventional heterodyne swept spectrum analyzer..
  • 【Built-in Calibration Signal Generator】When not used as Spectrum Analyzer it can be used as Signal Generator, MF/HF/VHF sinus output between 0.1MHZ-350MHz, UHF square wave output between 240MHz-960MHz. Built-in calibration signal generator that is used for automatic self test and low input calibration..
  • 【Tiny Spectrum analyzers】Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz.Color display showing 290 scan points covering up to the full low or high frequency range. Bulit-in rechargeable battery allowing a minimum of at least 2 hours portable use..
  • 【PC Control】Connected to a PC via USB it becomes a PC controlled Spectrum Analyzer.The USB interface implements the Serial over USB (CDC) protocol and there is a large set of commands that can be invoked over the serial interface. These co....
Check Stock

Uniclife 200 Watt Aquarium Heater with Thermometer, Fish Tanks Heater for 25-50 Gallon

  • TEMPERATURE MEMORY SYSTEM: this fish tank cooling system makes the chiller refrigerate continuously according to the previous temperature when power is supplied to protect the animals and plants. This chiller unit can be used in aquarium, aquaponics, and aquaculture applications to maintain perfect water temperatures for fish to thrive in. Once they achieve the proper temperature, that temperature is maintained with high consistency.
  • CHILLERS FOR HYDROPONIC AND AQUARIUM APPLICATIONS: Plant roots require a good flow of oxygen - more oxygen can be held by water when it is at lower temperatures. Using a chiller for hydroponic systems can highly benefit the rapid and healthy growth of plants. Chillers can also be used to combat the high water temperatures associated with aquariums, sometimes due to high-intensity lighting or warmer outside temperatures.
  • DURABLE AND QUIET: this hydroponic water chiller has a solid chassis along with overall stylish housing design will ensure that the chiller blends into any working environment. Comes with an anti-corrosive pure titanium evaporator for fresh and salt water use. Pairs with Blue Diamond Pumps HX 99 series water pumps.
  • EASY TO USE: the on-board electronic display makes the chiller quick and easy to use and set u....
Check Stock