Reviews High strength Threaded Rod

Jameson 7-8-IK Fiberglass Glow Rod Kit, 35'

  • Set of two 5' x 1/4" rods, two 2.5' x 1/4" rods, four 5' x 3/16" rods that assemble into 35' and are high in strength and flexibility so you can handle turns easily without breakage.
  • Durable steel threaded ferrules make it possible to customize rod length.
  • Included: two bullet nose with eyelet, two hooks, one whisk.
  • 1/4" diameter is the most rigid rod used for long spans.
Check Stock

Powerbuilt 648692 Tie Rod Puller - 2 Piece Press Screw, Silver

  • Made of drop forged heat treated chrome vanadium steel for strength.
  • Drop forged and heat treated chrome vanadium steel for strength.
  • Fine threaded center screws for maximum torque.
  • Two different length center screws to fit a wider range of vehicles.
Check Stock

SLIIMU Self Centering Dowel Jig Kit for Max 6.8” Thick Timber, Inch Woodworking Center Doweling Drill Guide Jig for Straight Hole, Portable Drill Block for Wood Dowel Hole with 6 Drill Sleeve

  • HIGH-QUALITY MATERIALS: The splints on both sides are made of industrial-grade aluminum alloy, which has high strength and strong durability.
  • Anodized orange surface, keep excellent finish, corrosion resistance.
  • the drilling guide center is made of high-quality steel, which has been quenched, and has good toughness..
  • MULTIPLE SIZE DRILLING HOLES: The set provides six hardened steel threaded sleeves, two for each of 1/4”, 5/16” and 3/8”, and the fixed guide holes on the fixture are 7/16” and 1/2”..
  • PRECISE POSITIONING: The steel drilling guide center is fixed in the middle of the locking threaded rod. By rotating the locking threaded rod, the aluminum alloy splints on both sides can be gathered or separated at the same time, realizing the accurate self-centering function. TIPS: After repeated use, if there is a small deviation, you can refer to the error adjustment method described below to make appropriate adjustments..
  • WHAT WILL YOU GET? Self Centering Dowelling Jig Plus x 1, 1/4” Drill Sleeve x 2, 5/16” Drill Sleeve x 2, 3/8” Drill Sleeve x 2, “L” Type Wrench x 2. TIPS: If you have any questions, just feel free to contact us for help..
Check Stock

Danco 80816 Complete Toilet Repair Kit Fill Valve, Flapper, Rod, Float Replacement, White

  • TOILET REPAIR KIT: The Danco Toilet Repair Kit includes replacement parts for the most common toilet parts that cause a leaky toilet and will restore your toilet to its original working condition..
  • TOILET FILL VALVE DIMENSIONS: The fill valve height is approximately 8.5 inches from the bottom of inside the tank..
  • TOILET BALL ROD FLOAT & BALL FLOT DIMENSIONS: The length of the brass rod is 7.75” and the length of the float is 5.5”.
  • when the brass road is threaded into both the float and threaded into the fill valve, the total length of the rod and float ends up being about 11.75”..
  • TOILET FLAPPER DIMENSIONS: The toilet flapper is ideal to replace worn-out flappers and is designed to fit 2 in. toilet flush valves..
  • EASY TO INSTALL: Includes easy to follow installation instructions. Complete this DIY Project with common household tools such as screwdriver and adjustable wrench..
  • BUILT TO LAST: The durable plastic and rubber constructions provides strength and durability which allows for optimal performance..
  • SINGLE-FLUSH APPLICATIONS: This toilet repair kit works for standard single-flush applications..
  • COMPLETE TOILET REPAIR KIT INCLUDES: Universal flapper with adapter, spring, float with rod, and ballcock with refill tube..
Check Stock

JWL 1 Cane Walking Stick Handle Shift Knob Ball Style Cast Aluminum with Threaded Rod Connector

  • Cast Polished Aluminum Ball Handle with threaded rod connector provided.
  • Very Strong Cast Aluminum material tapped to receive threaded rod.
  • 3/8" x 16 threaded rod 2" long connector to attach handle to cane shaft.
  • 2 1/4" high by 1 1/2" in diameter & 15/16" where base meets the shaft.
  • Base at connection point is about 15/16" to 1 " diameter.
Check Stock

L Shaped Shower Curtain Rod, Stainless Steel No Drill L Shaped Shower Curtain Rod (Adjustable Range 27.5\-35.4\& 27.5\-35.4\), Corner Shower Curtain Rod for Bathroom

  • Length Adjustment Curtain Rod – You can adjust the length to fit any shower area requirement. Confirm the length needed, and then rotate the rod to match the length. Once tightened the rod won’t come loose..
  • 2 Mounting Options – No drill mounting uses glue to attach the bracket to the wall if drilling would damage the wall. The glue has a strong bonding force so the bracket will stay attached. The other method is to drill and use screws and anchors to mount the brackets..
  • High Strength Curtain Rod – The 1 inch stainless steel rod uses threaded connections, which is much stronger than other rods. This construction also prevents the rod from coming loose..
  • Non-Droop Design – The design of the rod and brackets offset the fall caused by gravity even with heavy shower curtains over time. The rod will stay horizontal and will not sag..
  • Rod Surface Finish – The curtain rod is made of polished stainless steel providing a mirror like finish. The finish will not rust or flake off and will keep the bright finished..
Check Stock

The Hillman Group 4374 5/16-24 Hex Coupling Nut Fine Thread,Pack of 5

  • Commonly used in industrial applications.
  • Included variants run #10-32 to 3/4"-16 in fine thread size.
  • Zinc finish for improved corrosion resistance.
Check Stock

Jameson 7-36-23T Fiberglass Glow Rod Kit, 24'

  • Set of three 6' x 1/4" rods, and two 3' x 1/4" rods that assemble into 24' and are high in strength and flexibility so you can handle turns easily without breakage.
  • Durable steel threaded ferrules make it possible to customize rod length.
  • Included: one bullet nose with eyelet, and one hook.
  • Accessories use o-rings for secure attachment.
Check Stock

Threaded Rod, Carbon Steel, 1/2-20x1 ft

  • Price For: Each Basic Material: Steel Fastener Finish: Plain System of Measurement: Inch Material Grade: Low Carbon Rockwell Hardness: B85 to B97 Fastener Thread Direction: Right Hand Item: Threaded Rod Yield Strength (PSI): 45, 000 Thread Class: 1A Fastener Thread Type: UNF Dia./Thread Size: 1/2"-20 Tensile Strength: 60, 000 psi Overall Length: 1 ft..
  • Country of Origin (subject to change): United States.
Check Stock

Threaded Rod, Steel, 7/16-20x3 ft

  • Price For: Each Basic Material: Steel Fastener Thread Direction: Right Hand Item: Threaded Rod Meets/Exceeds: ASME B18.31.3 Tensile Strength: 115, 000 to 125, 000 Rockwell Hardness: C35 Overall Length: 3 ft. Temp. Range (F): Not Rated Fastener Thread Type: UNF Fastener Finish: Zinc Yellow Material Grade: B7 Dia./Thread Size: 7/16"-20 System of Measurement: Inch.
  • Yield Strength (PSI): 95, 000 Country of Origin (subject to change): Multiple.
Check Stock

10 oz. Dewalt AC100+ Gold Quik-Shot Acrylic Epoxy Adhesive (Case of 12)

  • ICC-ES ESR 2582 - Category 1, Cracked and Uncracked Concrete.
  • Bonding threaded rod and reinforcing bar into hardened concrete and masonry.
  • Can be installed in a wide range of base material temperatures.
  • Consistent performance in low and high strength concrete (2,500 to 8,500 psi).
Check Stock

TOPINCN Thread Repair Insert Kit Compatible Hand Tool Set for Auto Repairing Thread Master Repair Kit M6 x 1.0 x 8.0mm 25pcs

  • Made of high‑strength, high‑accuracy diamond‑shaped cross‑section steel wire. Wire thread inserts are also called threaded sheaths, stainless steel threaded sleeves, wire sleeves, which is a new type of female threaded fasteners.
  • Used to low‑strength engineering materials such as aluminum alloy, zinc alloy, alloy, copper, plastic, engineering plastics, etc., can significantly improve thread strength and wear resistance.
  • Form a high‑strength, wear‑resistant, high‑accuracy standard female thread when you fit the wire screw set in the screw hole of the workpiece of aluminum alloy and other materials.
  • Wire thread inserts can be used to convert between and inch thread holes, which is convenient and fast.
  • When a thread error occurs or a damaged female threaded hole is repaired, threaded insert can be used as a repair method. Repairing the threaded hole in a cost‑effective manner.
Check Stock

C.K T5410 10m Mighty Rod Cable Rod Set

  • Triple bonded steel connectors for extreme torsion and tensile strength - threaded, crimped and glued.
  • High sheen fibreglass composite rods minimise snagging and splintering.
  • Slimline connectors reduce snagging and provide accessibility through smaller holes.
  • 5 mm rods offer the optimal balance of rigidity and flexibility for the majority of cable routing requirements.
  • Set contents: 10 piece of 1 m rod, 1) cable hook, 1) Mini eye and ring, 1) 190 mm coiled steel flexi lead and 1) 5 mm adaptor.
Check Stock