Reviews High speed Steel End Mill

YOYO TOOLS, Carbide Square Nose End Mill Set- Metric Carbide End Mill CNC Milling Cutter Tungsten 4 Fultes by YOYOTOOLS (D8+D10 End Mill)

  • 8mm and 10mm End Mill Set, Material : Tungsten Carbide.
  • End Mill Cutting Diameter : 8mm , 10mm, HRC55 degrees.
  • Suit for: with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
  • End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
  • The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
Check Stock

Precision Twist 4ASM High Speed Steel Short Length Drill Bit, Black Oxide Finish, Round Shank, Spiral Flute, 135 Degree Point Angle, 11.00mm (Pack of 6)

  • HIGH PROCESSING EFFICIENCY: the edge of end mill bits is HARD and SHARP, process the heat treatment materials under 32°with high speed, reduce changing times and improve the production efficiency..
  • CUTTING EDGE DESIGN: the bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
  • APPLICATION: end mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
  • One Set of metric end mill bits Including: 8 Different kinds of Size end mills to meet your need, 2mm=1/16.
Check Stock

AUTOTOOLHOME 1/8\ 3/16\ 1/4\ 5/16\ 3/8\ 1/2\ high Speed Steel HSS 4 Flute Straight End Mill Cutter 5/32\ 1/16\ Set of 8

  • Cutting Diameter : 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 5/32" 1/16".
  • Suit for: Hardness of metal for above 30 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
  • End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
  • The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
Check Stock

End Mill Bits, HSS CNC End Mill Cutter for Wood, Aluminum, Steel, Titanium, Straight 4 Flute Mill Bit Set of 6（3mm,4mm,6mm,8mm,10mm,12mm）

  • 1.Four flutes produce a better finish than fewer flutes..
  • 3.One Set of end mill bits Including: 6 Different kinds of Size end mills to meet your need, 3mm, 4mm,6mm, 8mm,10mm,12mm.
  • 4.Hardness of metal for above HRC 45 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
  • 5.End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
Check Stock

OREI eARC 4K 60Hz Audio Extractor Converter 18G HDMI 2.0 ARC Support - HDCP 2.2 - Dolby Digital/DTS Passthrough CEC, HDR, Dolby Vision HDR10 Support (HDA-927)

  • Cutting Diameter : 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 5/32" 1/16".
  • Suit for: Hardness of metal for above 30 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
  • End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
  • The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
Check Stock

YG1 E5G97911 | 1/4x1/4x5/8x2-1/2 AluPwr 3FL HP Carbide Corner Radius End Mill

  • Corner radius end mills have cutting edges with rounded corners to reduce chipping and provide longer tool life.
  • Four flutes produce a better finish than fewer flutes.
  • Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures.
  • Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds.
  • Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling.
Check Stock

Rannb End Mill Cutter 1/16\ Cutting Dia 1/4\ Shank Dia 4 Flutes End Mill Drill Bit - 5pcs

  • ⭐【Material】The end mills are made of High Speed Steel,high hardness,good wear resistance and durability..
  • ⭐【Pack of 5pcs】Sold in pack of 5pcs of end mill cutters..
  • ⭐【Good Design】 Large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
  • ⭐【Applicable Material】Suitable for side milling, end milling, finish machining in carbon steel, alloy steel, die steel, tool steel, cast iron, and titanium.And Circuit boards,Metal,Majority of plastics, Wood, Fibre glass, Carbon and environmental board..
  • ⭐【Heat Treatment Process】The High Hardness Steel go through the heat treatment process so the end mill is more durable. Reduce changing times and improve the production efficiency..
Check Stock

CNC Router Bits 1/8' Shank Ball Nose Carbide End Mill Two Flute CNC Spiral Bits Upcut Cutter 3.175mm Carbide End Mill for Alloy Steels/Hardened Steels 10pcs (3.175x32x55mm)

  • DIMENSIONS: 1/8" (3.175mm). Cutting edge diameter, 1/8" (3.175mm). Cutting edge length/flute length, 1/2"(12mm). Overall length, 1-1/2"(38.5mm)..
  • Range of processing：Ball end mills can mill die steel/cast iron/carbon steel/alloy steel/tool steel/ general iron. Ball nose milling cutters can work normally in high temperature environments..
  • High efficiency：Ball nose carbide end mill is a double-blade with helical design, and the large and uniform pin-out groove is conducive to high-speed machining. The sharp double edge can effectively improve the cutting efficiency of the tool..
  • Perfect cutting：The ball mill design of the double-blade ball end milling cutter effectively reduces the burr and increases the wear resistance of the tool..
  • Ball Nose End Mills are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

Niagara Cutter C430R-0.375-D3-R030.0-Z4 C430R Carbide Radius End Mill TiAlN Finish 4 Flutes 3/8 Cutting Diameter 3/8 Shank Diameter 2-1/2 Overall Length 1

  • Corner radius end mills have cutting edges with rounded corners to reduce chipping and provide longer tool life.
  • Four flutes produce a better finish than fewer flutes.
  • Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures.
  • Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds.
  • Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling.
Check Stock

Akozon 5pcs M3-M8 Pilot Slotting Counterbore Mould End Mill Cutter Solid Slot Countersink End Mill Drill Bit

  • 【Main purpose】: Countersunk end mill is a specially manufactured tool, mainly used to cut holes that allow bolts or screw heads to be screwed into..
  • 【High precision】: The cutting hole and bottom hole of this tool have high alignment accuracy. Because of its high production efficiency, it is often used in the machining industry..
  • 【High-quality and durable】: The Pilot Counterbore End Mill Cutters is made of hard high-speed steel, with high toughness, wear resistance, and high hardness for high-speed cutting.
  • it is usually used for assembly on a milling machine..
  • 【More time-saving】: Countersunk cutters reduce the time to change tools, improve the efficiency of machine actuator movement and save manufacturing time..
  • 【Wide range of applications】: Counterbore bit set is suitable for milling of copper, aluminum, steel, cast iron, etc., and can be directly processed or finely processed to heat treatments..
Check Stock

YG-1 E5021 Carbide Square Nose End Mill, TIALN Multilayer Finish, 30 Deg Helix, 4 Flutes, 2.5\ Overall Length, 0.25\ Cutting Diameter, 0.25\ Shank Diameter

  • Suitable for general-purpose machining on steel, chromium-nickel steel, and cast iron.
  • Four flutes produce a better finish than fewer flutes.
  • Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than uncoated finish, TiN coating, and TiCN coating.
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
  • Square nose end mills (also called square end) create sharp, unrounded cuts.
Check Stock

Tolsous Molino De Moler Maiz Electrico Maquina Corn Wheat Grain Mill Grinder for Flour Electric Grinding Machine with Steel Funnel para Rice Feed in Powder 110V Electrica

  • HIGH-SPEED MOTOR - The heavy duty grain grinder has been well optimized the high-power motor with 2200W that can pour a large capacity cereals continuously into the funnel in rapid grinding...
  • IMPORTANT --This is a high speed commercial flour mill, it has the power of 2200W, grinding speed of more than 120 LB grains per hour, so it will make a big noise, suitable for commercial use in processing large quantities of grain, it can help the high efficiency grinding work, not suitable for the kitchen household (if you don't mind the noise, the grain mill is also a good choice).
  • HIGH QUALITY MATERIAL--Capacitor shell is made of iron galvanized material, the transport process will not be crushed, put an end to rust.
  • Heritage of traditional mill, innovative steel mill technology..
  • WIDELY USE - 2200W farm electric mill grinder can grind wheat, rice, corn, sorghum, soybeans, and other crops into dry powder.
  • Which is suitable for grinding bean curd, starch, rice flour, corn and used in other food industries.
  • WORKING CAPACITY --Cereals mill grinder Work capacity: Milling: (Corn ≤ 133lbs / h, Rice ≤ 166lbs / h, Wheat ≤166lbs / h, Paddy rice ≤ 110lbs / h).
  • Refining: (Soybeans ≤ 110lbs / h, Rice ≤ 110lbs / h)-- if machine can not work as expected, please em....
Check Stock

YG-1 EH970 Carbide Square Nose End Mill, Long Reach, TIALN Multilayer Finish, Roughing Cut, 45 Deg Helix, 4 Flutes, 2.5\ Overall Length, 0.25\ Cutting Diameter, 0.25\ Shank Diameter

  • Roughing end mills have chip-breaking cutting edges that remove material in less time than conventional end mills.
  • Fine-pitch tooth design and tool geometry are suitable for machining steel up to Rockwell hardness C45, stainless steel, titanium alloys, and nickel-based alloys.
  • Long-reach end mills have an extended shank for access to recessed areas of the workpiece.
  • Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than TiN and TiCN coatings.
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
Check Stock