Reviews High pressure Hydraulic Hose

10000 psi Hydraulic Hand Pump 2 Speed Power Pack Hydraulic Lifting Pump

  • Maximum operating pressure of 10,000 pounds per square inch (psi)，Two-speed Plunger Improves Pump Efficiency By 70%.
  • Advances and releases design for applications with a constantly applied load Pressure relief valve (Oil return knob)helps prevent pump overload, switch( venting nut) on the tail of it avoid sealed of oil box.
  • Oil capacity: 700cc, 2M high pressure hose ，oil pipe coupling with PT3/8 thread.
  • Manual Hydraulic Pump is durable, smooth surface and good sealing performance. Integral Casting Pump Body, Durable, Stable And Reliable.
  • High-pressure hydraulic hand pump for 5 ton to 200 ton hydraulic ram cylinders or split unit hydraulic puller and other hydraulic applications.
Check Stock

VEVOR Hydraulic Hose 3/8 inch x 100 ft, Coiled Hydraulic Hose 4800 PSI, Rubber Hydraulic Hose with 2 High-Tensile Steel Wire Braid, Bulk Hydraulic Hose -20°C to 140°C, Hydraulic Oil Flexible Hose

  • 【DURABLE MATERIAL】- The innermost tube and the outer protective cover are constructed of synthetic rubber. The outermost is cover by fabric. The inner material is two high-tensile steel wire braid reinforcement layers..
  • 【100 FT HYDRAULIC HOSE】- The coiled hydraulic hose is 100 ft long in total, the inner diameter is 3/8 inch, and the outer diameter 3/4 inch. With a 4800 PSI working pressure, the hydraulic line is explosion-proof..
  • 【HIGH STRENGTH】- The bulk hydraulic oil hose is constructed of synthetic rubber to resist oil and chemicals, while the outer cover also protects the hose from weather, ozone, abrasion, and corrosion..
  • 【INCREDIBLE FLEXIBILITY】- Wire hose layers provide flexibility and versatility to allow you to install your rubber hose and hydraulic fittings in tight quarters for less vulnerability. It can work between -40 °C and 121 °C..
  • 【VARIOUS USES】- The hose is suitable to carry petroleum, mineral oils, emulsion, hydrocarbons, and water-based hydraulic fluids. It is ideal for construction, agriculture, and other machinery that uses a hydraulic system..
Check Stock

VEVOR Hydraulic Pressure Test Kit, 25/40/60Mpa/9Couplings, Excavator Parts Hydraulic Tester Coupling, Hydraulic Pressure Gauge Kit for Excavator Construction Machinery

  • Accurate Pressure Gauge: The hydraulic gauge kit has three pressure gauges of different ranges: 0-3500PSI/25MPa, 0-5800PSI/40MPa, 0-8600PSI/60MPa. With two units and precise graduations, the meters are accurate in measuring pressure..
  • Interchangeable Test Couplings: Eight interchangeable test couplings are included in this excavator hydraulic pressure test kit, with the sizes of G1/8, G1/4, G3/8, M10/1, M10/1.25, M14/1.5, UNF7/16-20, and UNF9/16-18, which are suitable for many kinds of standard excavators..
  • Durable Materials: This hydraulic gauge test kit contains corrosion resistance gauges and carbon steel couplings with high strength. The working oil filled in the meters effectively avoids vibration and pulsation..
  • Portable Case & 5.25' Test Hose: All parts of the hydraulic pressure test gauge are neatly stored and tightly placed in a thickened plastic toolbox. The compact design makes it save storage space and easy to carry. In addition, three test hoses help extend the pressure test gauge to the inside of the machine for easy reading..
  • Wide Application: This excavator hydraulic pressure gauge comfortably fits for pumps, compressors, hydraulic presses, pneumatic equipment, and motors of various excavators. It is widely applied in construction, shippi....
Check Stock

VEVOR Hydraulic Pressure Test Kit, 25/40/60Mpa/11Couplings, Excavator Parts Hydraulic Tester Coupling Hydraulic Pressure Gauge Kit for Excavator Construction Machinery

  • Accurate Pressure Gauge: The hydraulic gauge kit has three pressure gauges of different ranges: 0-3500PSI/25MPa, 0-5800PSI/40MPa, 0-8600PSI/60MPa. With two units and precise graduations, the meters are accurate in measuring pressure..
  • Interchangeable Test Couplings: Ten interchangeable test couplings are included in this excavator hydraulic pressure test kit, with the sizes of G1/4, R1/4, G3/8, G1/8, M10 x 1, M10 x 1.25, M1/8, M14 x 1.5, 7/16, and 9/16, which are suitable for many kinds of standard excavators..
  • Durable Materials: This hydraulic gauge test kit contains corrosion resistance gauges and carbon steel couplings with high strength. The working oil filled in the meters effectively avoids vibration and pulsation..
  • Portable Case & 5.25' Test Hose: All parts of the hydraulic pressure test gauge are neatly stored and tightly placed in a thickened plastic toolbox. The compact design makes it save storage space and easy to carry. In addition, three test hoses help extend the pressure test gauge to the inside of the machine for easy reading..
  • Wide Application: This excavator hydraulic pressure gauge comfortably fits for pumps, compressors, hydraulic presses, pneumatic equipment, and motors of various excavators. It is widely applied in construction, sh....
Check Stock

Cr Agricultural Truck Hydraulic Bead Breaker 10,000PSI Kit with Foot Pump and Air Hose

  • Self-retracting and the working range of our bead breaker is up to 4".
  • The tractor truck tire hydraulic bead breaker changer packaging inclufed hydraulic foot pump and 78" air hose.
  • Pressure Range: 40-150psi (2.8 to 10.3Bar).
  • High-quality and high performance hydraulic bead breaker is able to effectively break beads in seconds by 10,000 lbs of force.
  • Hydraulic action, suitable for breaking beads on commercial and agricultural tyres, and it can be applied in any 1, 2 and most 3 piece 2-5-10 hole budd and all tubeless truck tires rims, including some new style wheels.
Check Stock

VEVOR Hydraulic Pressure Test Kit 25/40/60MPa, Hydraulic Test Gauge Kit with 6 Couplings, Hydraulic Gauge Kit Made of 304 Stainless Steel, for Excavator Construction Machinery

  • Accurate Pressure Gauge: The hydraulic gauge kit has three pressure gauges of different ranges: 0-3500PSI/25MPa, 0-5800PSI/40MPa, 0-8600PSI/60MPa. With two units and precise graduations, the meters are accurate in measuring pressure..
  • Interchangeable Test Couplings: Six interchangeable test couplings are included in this excavator hydraulic pressure test kit, with the sizes of G1/4, G1/8, G3/8, M14 x 1.5, M10 x 1, and M10 x 1.25, which are suitable for many kinds of standard excavators..
  • Durable Materials: This hydraulic gauge test kit contains corrosion resistance gauges and carbon steel couplings with high strength. The working oil filled in the meters effectively avoids vibration and pulsation..
  • Portable Case & 5.25' Test Hose: All parts of the hydraulic pressure test gauge are neatly stored and tightly placed in a thickened plastic toolbox. The compact design makes it save storage space and easy to carry. In addition, three test hoses help extend the pressure test gauge to the inside of the machine for easy reading..
  • Wide Application: This excavator hydraulic pressure gauge comfortably fits for pumps, compressors, hydraulic presses, pneumatic equipment, and motors of various excavators. It is widely applied in construction, shipping, etc..
Check Stock

OrangeA Carpet Cleaning Solution Hose 1/4 Inch 25ft/50ft/100ft/200ft Blue Solution Line Hose High Pressure High Heat Solution Hose (100ft)

  • Heavy duty black bend restrictors on both ends.
  • Soft, small bending radius. High wear resistance smooth wall..
  • The steel braid construction gives the solution line hoses both strength and flexibility.
  • This carpet solution line is made specifically for the carpet cleaning industry as a solution hose for truckmount and portable applications.
  • The solution hose is widely used in automotive pressure systems, rotating electric vehicle brake control system piping systems, automotive, hydraulic operation and hydraulic control system and so on.
Check Stock

Esco 10202 Pro Series Combination Bead Breaker Kit with 5 Quart Hydraulic Pump

  • Includes model #10101 Combi Hydraulic Bead Breaker.
  • 5 quart hydraulic pump with durable metal reservoir and aluminum air motor.
  • 8 ft. hydraulic hose with swivel fitting and coupler.
  • Kit includes air pressure regulator that regulates the inbound air pressure to 110 psi which prevents damage to the seals and hydraulic system.
  • Works on all single, two and three piece wheels.
Check Stock

Esco 10820 Pro Series Combi Bead Breaker Kit with Pump

  • Includes model #10895 Combi Bead Breaker.
  • 5 quart hydraulic pump (10,000 psi) with durable aluminum air motor.
  • 8 ft. hydraulic hose with swivel fitting and coupler.
  • Kit includes air pressure regulator that regulates the inbound air pressure to 110 psi which prevents damage to the seals and hydraulic system.
  • Works on all single, two and three piece wheels.
Check Stock

Mophorn 150HP Hydraulic Outboard Steering Kit Boat Marine System

  • 150 HP Hydraulic Steering Kit: The HK4200A-3 hydraulic outboard boat steering kit includes a balanced steering cylinder, a low-friction helm, two lengths of 20ft hose, and a fill kit. It will perfectly replace your aging or broken equipment..
  • Built-in Two-way Lock Cylinder: Output force: 409.7 kgf. The cylinder has a built-in two-way locking valve, which eliminates rebound torque during torsion. The robust barrel design and the sealing system can withstand the harsh environment..
  • Max. 150HP Helm Pump: Max. Working pressure: 6.9 Mpa/1000 psi. The low friction helm for smooth and comfortable steering. And it has a replaceable shaft seal that can be easily replaced..
  • Cut-to-length Hoses: Our high-strength nylon hose is equipped with quick-fit 1/4'' pipe fitting for easy and fast installation and multiple re-uses. Each hose is 20' long and can be cut for your specific installation, accommodating most boats..
  • Great Partner for Your Boat: Our hydraulic steering kit is for single-outboard powered boats rated up to 150 HP, including runabouts and inflatables — and outboard....
Check Stock

70M Digital Pressure Gauge Kit with 2 70MPA/10000PSI, Hydraulic Pressure Gauges for Excavator, 2 Test Hoses, 9 Couplings Hydraulic Gas Water Pressure Test Kit with Backlight, 1 Year Warranty

  • 【Perfect Fit】 Suitable for excavator brand includes: Caterpillar, CAT, Case, komutsu, Komatsu, Daewoo, Hyundai, Kato, Hitachi, Kawasaki, Komastu, Kobelco, John Deere, Sumitomo, Bobcat, Sany, Sumitomol. Quick release connector fits for both USA and Japanese brand excavator. Precisely measures the pressure of hydraulic system in the excavator construction machines etc..
  • 【What You Get】 70M Digital Hydraulic Pressure Test Coupling Kit Comes with ① Qty-2 10000PSI Digital Pressure Gauges (with protective cover).
  • ② Qty-2 63in (1.6m) Test Hoses with M16*2 end and BSP 1/4" female end respectively.
  • ⑤ Qty-1 Waterproof Aluminum Storage Case..
  • 【Measurement】 Digital Gauge Max Work Pressure: 0 - 10000PSI / 700BAR / 70MPa - Ø80mm. 9 Type Test Couplings: G1/4, G1/8, G3/8, M10*1, M10*1.25, M14*1.5, UNF7/16-20, UNF9/16-18 and NTP1/4..
  • 【Better Accuracy】 Hydraulic Pressure Gauge consists of premium grade pressure sensor and electronic components. High precision and stability. Precisely measures gas, liquid, oil and non-corrosive mediums of stainless st....
Check Stock

VEVOR Hydraulic Outboard Steering Kit 300HP, Hydraulic Steering Kit Helm Pump,Hydraulic Boat Steering Kit with 22 Feet Hydraulic Steering Hose for Boat Steering System

  • Hydraulic Outboard Boat Steering Kit: The hydraulic outboard boat steering kit includes a steering cylinder, a steering pump, a 13.5" steering wheel, and a 22ft hose kit. It is a perfect replacement for your aging or broken equipment and becomes a good companion for your sailing trips..
  • Aluminum Alloy Steering Cylinder: Output force: 468 KGF. Steering cylinders come with an upgraded sealing system for maximum protection from saltwater and compression set. Positionable stainless steel O-ring (ORB) fittings for easy hose routing. And the robust barrel is made of aluminum alloy, which is wear-resistant, corrosion-resistant, and does not fear seawater erosion..
  • Max. 300HP Helm Pump: Max. Working pressure: 6.9 Mpa/1000 psi. The hydraulic pump has a replaceable shaft seal, built-in locking valve, relief valve, ORB fittings, and airbag. Allow you to use the equipment securely and conveniently..
  • Nylon Hose & Steering Wheel: The 13.5" steering wheel is made of aluminum alloy and high-quality plastic. The 22" nylon hose with quick-fit 1/4 fitting is easy to install. And the hose can be cut to the desired length..
  • Great Partner for Your Boat: Works for boats up to 60 MPH with single outboards up to 300 HP. Outboard-powered boats like the center console, offsho....
Check Stock

YFIXTOOL Hydraulic Pressure Test Kit with 5 Gauges (150/1500/3500/6000/9000 PSI) & 14 Tee Connectors, Hydraulic Pressure Gauge Set with 5 Test Hoses & 13 Couplings for Excavators

  • ?【Main use of hydraulic test kit】This hose gauge kit is designed for testing pressure in a hydraulic system..
  • ?【Features】This hydraulic hose has the characteristic of heat resistance, chemical resistance, acid resistance and solvents..
  • ?【Strong environmental adaptability】Ozone resistance, UV resistance, adaptation to climate change, no moisture absorption..
  • ?【Convenient to use】With advanced structure, reliable sealing, small size, light weight and easy to use..
  • ?【High quality and durable & Guarantee】Because the inner wall is smooth, the flow resistance is very small. If there any issue about this product, please contact us, we will give the best solution in the first time. we guarantee replacement or refund..
Check Stock