Reviews High end Finish

End Mill Bits, HSS CNC End Mill Cutter for Wood, Aluminum, Steel, Titanium, Straight 4 Flute Mill Bit Set of 6（3mm,4mm,6mm,8mm,10mm,12mm）

  • 1.Four flutes produce a better finish than fewer flutes..
  • 3.One Set of end mill bits Including: 6 Different kinds of Size end mills to meet your need, 3mm, 4mm,6mm, 8mm,10mm,12mm.
  • 4.Hardness of metal for above HRC 45 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
  • 5.End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
Check Stock

SpeTool 5Pcs 1/8 inch Aluminum End Mills 2 Flutes CNC Spiral Router Bits Non-Ferrous Metal Upcut 1-1/2 inches Long for Woodworking Cutting

  • 【SPECIFICATIONS】End mills for aluminum with 1/8” shank, 1/8” cutting diameter, 7/16” cutting length and 1-1/2” total length, 2 flutes with flat top, 5 pieces included in the package..
  • 【HIGH PERFOMANCE】These end mills for aluminum are designed for perfect surface finish because of the effective chip removal. With the long service life they are suitable for side milling, end milling, finish machining, etc..
  • 【HIGH PRECISION】High precision grinding and polishing, high resistance to abrasion and temperature resistance, good rigidity, high durability and not easy to break..
  • 【ALUMINUM APPLICATIONS】Best for processing aluminum 6061,7075 etc. Also suitable for non-ferrous metal, plywood, OAK, MDF, and Any Hardwood Working..
  • 【WIDELY USED】These aluminum end mills suit for CNC routers, any brands of plunge routers with 1/8" collet..
Check Stock

SpeTool 1/4 End Mill for Aluminum 3 Flutes CNC Spiral Router Bit for Aluminum Cut Non-Ferrous Metal Upcut 2.5 inches Long 5 Pieces

  • 【SPECIFICATIONS】End mills for aluminum with 1/4” shank, 1/4” cutting diameter, 3/4” cutting length and 2-1/2” total length, 3 flutes with flat top, 5 pieces included in the package..
  • 【HIGH PERFOMANCE】These end mills for aluminum are designed for perfect surface finish because of the effective chip removal. With the long service life they are suitable for side milling, end milling, finish machining, etc..
  • 【HIGH PRECISION】High precision grinding and polishing, high resistance to abrasion and temperature resistance, good rigidity, high durability and not easy to break..
  • 【ALUMINUM APPLICATIONS】Best for processing aluminum 6061,7075 etc. Also suitable for non-ferrous metal, plywood, OAK, MDF, and Any Hardwood Working..
  • 【WIDELY USED】These aluminum end mills suit for CNC routers, and Makita, Bosch, or any brands of plunge routers with 1/4" collet..
Check Stock

SpeTool 1/8 End Mills for Aluminum 3 Flutes CNC Spiral Router Bits for Aluminum Cut Non-Ferrous Metal Upcut 1.5 inches Long 5 Pieces

  • 【SPECIFICATIONS】End mills for aluminum with 1/8” shank, 1/8” cutting diameter, 7/16” cutting length and 1-1/2” total length, 3 flutes with flat top, 5 pieces included in the package..
  • 【HIGH PERFOMANCE】These end mills for aluminum are designed for perfect surface finish because of the effective chip removal. With the long service life they are suitable for side milling, end milling, finish machining, etc..
  • 【HIGH PRECISION】High precision grinding and polishing, high resistance to abrasion and temperature resistance, good rigidity, high durability and not easy to break..
  • 【ALUMINUM APPLICATIONS】Best for processing aluminum 6061,7075 etc. Also suitable for non-ferrous metal, plywood, OAK, MDF, and Any Hardwood Working..
  • 【WIDELY USED】These aluminum end mills suit for CNC routers, and Makita, Bosch, or any brands of plunge routers with 1/8" collet..
Check Stock

YG-1 E5021 Carbide Square Nose End Mill, TIALN Multilayer Finish, 30 Deg Helix, 4 Flutes, 2.5\ Overall Length, 0.25\ Cutting Diameter, 0.25\ Shank Diameter

  • Suitable for general-purpose machining on steel, chromium-nickel steel, and cast iron.
  • Four flutes produce a better finish than fewer flutes.
  • Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than uncoated finish, TiN coating, and TiCN coating.
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
  • Square nose end mills (also called square end) create sharp, unrounded cuts.
Check Stock

YG-1 E5023 Carbide Square Nose End Mill, Double End, TIALN Multilayer Finish, 30 Deg Helix, 4 Flutes, 2\ Overall Length, 0.140625\ Cutting Diameter, 0.1875\ Shank Diameter

  • Double-end square end mills create sharp, unrounded cuts and have cutting edges on both ends for longer tool life.
  • Suitable for general-purpose machining on steel, chromium-nickel steel, and malleable cast iron.
  • Stub length increases the strength of the tool, making it less likely to break in the workpiece.
  • Four flutes produce a better finish than fewer flutes.
  • Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than uncoated finish, TiN coating, and TiCN coating.
Check Stock

HamWoo Longer Arm Hex Key Wrench Set，9 Piece by 1/16 to 3/8 in. L-Shaped,Ball End

  • 9-Piece,L-Shaped,Ball End and Longer Arm Hex Key Wrench Set,Including 1/16, 5/64, 3/32, 1/8, 5/32, 3/16, 1/4, 5/16, 3/8 inch..
  • The keys are made of high strength Chrome Vanadium steel with high hardness.
  • black oxide finish for protection against corrosion and rust resistance。.
  • Ball-end design make entry angle of up to 25 degrees,it is easy and convenient to finish your work..
  • Long-arm design provides extended reach range and enhanced levers and torque.
  • Lifetime warranty get you protected after purchase..
Check Stock

AUTOTOOLHOME 1/4 inch HSS 4 Flutes End Mills Milling Cutter End Drill Bit Straight Shank Pack of 2

  • HIGH PROCESSING EFFICIENCY: the edge of end mill bits is HARD and SHARP with TIAIN coating, process the heat treatment materials under 32°with high speed, reduce changing times and improve the production efficiency..
  • APPLICATION: end mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
  • CUTTING EDGE DESIGN: the bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
  • STRONG and DURABLE:The end mill bits are made from Ultra-fine tungsten steel bar, with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
Check Stock

Roundhill Furniture Athens Contemporary 3-Piece Wood Shelf Coffee Table Set, Walnut and Gray

  • The set includes a coffee table and two end tables, with a weathered walnut finish on table top and light gray finish on the base.
  • Features overextended rectangular top and a splayed-leg look. A shelf underneath the table top provides extra storage space.
  • The table is constructed of high-quality manufactured wood, with a weathered walnut finish on table top and light gray finish on the base.
  • Dimensions: Coffee table: 48"W x 24"D x 19"H. End table: 24"W x 22"D x 23"H. Table top thickness: 1.77".
  • Some assembly required. Photo may slightly different from Actual Item in Terms of color due to the Monitor's display.
Check Stock

Amazon Basics Loop-End Rayon Finish Commercial String Mop Head, 5 Inch Headband, Medium, 6-Pack

  • Mop head helps apply floor finish smoothly and evenly with no lint.
  • Includes a medium, 4-ply, loop-end rayon finish mop head made with synthetic blend.
  • Looped ends and tailband reduce tangling and fraying for better performance and longer product life.
  • Absorbent and high level of release for efficient performance.
  • Suitable for floor finish applications in commercial and industrial environments.
  • compatible with Amazon Basics Jaw Mop Handle (sold separately).
Check Stock

Roundhill Furniture Athens Contemporary 3-Piece Wood Shelf Coffee Table Set, Charcoal and Gray

  • The set includes a coffee table and two end tables, with a weathered charcoal finish on table top and beige finish on the base.
  • Features overextended rectangular top and a splayed-leg look. A shelf underneath the table top provides extra storage space.
  • The table is constructed of high-quality manufactured wood, with a weathered walnut finish on table top and light gray finish on the base.
  • Dimensions: Coffee table: 48"W x 24"D x 19"H. End table: 24"W x 22"D x 23"H. Table top thickness: 1.77".
  • Some assembly required. Photo may slightly different from Actual Item in Terms of color due to the Monitor's display.
Check Stock

Sonax 208300 Profiline NP 03-06, 33.8 fl. oz. , Black

  • REMOVES PAINT DEFECTS - Sonax Nano Polish 03/06 performs light correcting on the front end, and finishes out to a near perfect on the back end, Diminishing abrasive technology allows you to cut light scratches as a compound while finishing as a polish for a near mirror-like finish on the vehicle's paintwork.
  • HIGH GLOSS FINISH - The water based and silicone free polishing formula leaves an OEM high gloss paint finish with a hologram-free paint surface on your car, truck, or any other motorized vehicle.
  • PERFECT PAINT - Nano Polish 03/06 is a great final step in the polishing process, it will help you remove 5% of imperfections to get your paint as perfect as possible.
  • Removes sanding marks of P2500 grit or finer, Recommend applying with a DA polisher or Sonax Yellow Pad (not included) if you are doing slight correcting, if using as a third step or finishing polish use Sonax Black Pad (not included) which is designed to make buffing and polishing easy.
  • Due to the water based formula, there is little to no dusting during the polishing process, Our dust-free formula makes the entire process easier from start to finish-saving time in both the polishing and clean-up process.
Check Stock

KES Kitchen Paper Towel Holder Brushed Brass for 11-Inch Long Paper Towel Roll Wall Mount Dispenser SUS 304 Stainless Steel, A2175S30-BZ

  • Fits Kitchen Paper Rolls: The distance between the roll arm and wall surface is 4.72" (120mm). Overall length is 13.23" (336mm). The usable length of the paper towel holder is 11.81" (300mm)..
  • Rustproof: This under cabinet paper towel holder is made of SUS 304 stainless steel, protecting against corrosion & rust and needs trivial maintenance. Ideal for the humid environment such as the kitchen..
  • 2 Ways to Install: 1.You can also install it with long screws (35mm) and anchors for wall-mounted. 2. Use short screws (15mm) for cabinet-mounted. Both vertical or horizontal placement installation method for your option..
  • Anti-Slip Design: Open-ended roll arm allows you to easily change paper towel rolls. Besides, this paper towel rack has a round end cap design, preventing the paper towel from slipping off..
  • Brushed Brass Finish: Matte brushed brass finish, not mirror-like shining finish nor champagne gold finish, with a combination of clean, refined lines for a high-end style..
Check Stock