Reviews High capacity Machinery

Heyiarbeit 8mmx10mm Clamp Tight Motor Shaft 2 Diaphragm Flexible Coupling

  • [Technical Parameter] Shaft Usage: 8 mm / 0.31" to 10 mm / 0.39".
  • Total Size: 45mm x 34mm / 1.77" x 1.34" (LxD).
  • [High Quality] Made of high strength aluminum alloy, excellent bearing capacity, long service life.
  • Need no lubrication, convenient and quiet to use.
  • [Feature] Stable and reliable performance, with good vibration damping, buffering and electrical insulation performance.
  • [Application] Widely used in shafting transmission of various mechanical devices, such as pumps, fans, compressors, hydraulic machinery, petroleum machinery, printing machinery, textile machinery, chemical machinery, mining machinery, metallurgical machinery, aviation (helicopter), ship high-speed power transmission system, steam turbine, piston power mechanical transmission, etc.
Check Stock

Heyiarbeit 10mm to 10mm Shaft Coupling Aluminium Flexible Plum Coupling D30 L35 Connector Flexible Coupler for 3D Printer CNC Machine and Servo Stepped Motor

  • [Technical Parameter] Shaft Usage: 10 mm / 0.39" to 10 mm / 0.39".
  • Total Size: 35mm x 30mm / 1.38" x 1.18" (LxD).
  • [High Quality] Made of high strength aluminum alloy, excellent bearing capacity, long service life.
  • Need no lubrication, convenient and quiet to use.
  • [Feature] Stable and reliable performance, with good vibration damping, buffering and electrical insulation performance.
  • [Application] Widely used in shafting transmission of various mechanical devices, such as pumps, fans, compressors, hydraulic machinery, petroleum machinery, printing machinery, textile machinery, chemical machinery, mining machinery, metallurgical machinery, aviation (helicopter), ship high-speed power transmission system, steam turbine, piston power mechanical transmission, etc.
Check Stock

CNBTR 2PCS 45# Steel 2 Modulus 20 Teeth 14mm Hole Dia 90 Degrees Tapered Bevel Gear Wheel

  • Made of high quality 45# steel ,high wear-resistance,longtime use..
  • Lower contact ratio between gears, higher load capacity..
  • It only can fit for 2module gear,20 teeth,90 degrees,Hole Dia 14mm..
  • Suitable for used in agricultural equipment, textile machinery, printing machinery, Mechanical transmission, etc..
  • Note:1 to 1 bevel gear (only 1 to 1 match, can not match with other modules and other number of teeth).
Check Stock

M18 Cordless 2-Speed Grease Gun Kit - No. 2646-21CT

  • EXCELLENT POWER:The Cordless Grease Guns Powered with 20-volt motor delivers 12000 PSI max operating pressure, pushes up to 5.0 oz/min high-flow applications..
  • Multifunctional Electric Grease Gun: This electric grease gun both barreled oil and cartridge lubricants can be used, which makes the oil easy and convenient to use..
  • Large-capacity Battery: This electric grease gun with a 3000 mah large-capacity rechargeable lithium battery, which can work continuously for 30-40 minutes when fully charged. It takes 2-3 hours to fully charge the battery..
  • LIGHTWEIGHT:This electric grease gun is labor-saving, fast, easy to operate, small in size, light in weight, It also has a carrying case, which is very easy to carry and store..
  • Wide Application: This electric grease gun is widely used in motor vehicles, heavy machinery, ships, automobiles, mechanical equipment, agricultural machinery, engineering vehicles can all be oiled and maintained with a powered grease gun..
Check Stock

2 pcs 5/8\ x 1-1/2\ Tension Belleville Compression Spring Washers .155\ Thickness

  • Disc spring has a larger deformation energy per unit volume than other types of springs. Has good buffer shock absorption capacity.
  • Heavy load, short stroke, small space required, easy to use in combination.
  • Often used as a strong buffer and shock absorber in heavy machinery, it is also a compacting device for clutches, safety valves, pressure reducing valves, etc.
  • Easy to repair and replace, high economic security, suitable for precision heavy machinery with small space and large load.
Check Stock

CNBTR Tapered Bevel Pinion Gear 12mm Hole Diameter 45# Steel 1.5 Module 16 Teeth Pack of 2

  • Made of 45# steel with high wear-resistance,strong and durable..
  • Lower contact ratio between gears, higher load capacity..
  • It only can fit for 1.5 module gear,16 teeth,90 degrees,12mm Hole Diameter..
  • Suitable for used in agricultural equipment, textile machinery, printing machinery, Mechanical transmission, etc..
  • Note:1 to 1 bevel gear (only 1 to 1 match, can not match with other modules and other number of teeth).
Check Stock

BEMONOC 2Pcs/Pack HTD 5M Rubber Timing Belts Closed-Loop 400mm Length 80 Teeth 15mm Width Industrial Timing Belt

  • Fiberglass Tensile Cord - High dimensional stability and maximum flexibility engineered and tested for highly wear resistant performance.
  • Nylon Tooth Cover - Durability and wear resistance, increased power capacity.
  • Timing belt efficient transmission, low noise, oil resistance, fatigue, inflexible, non-stretch, high precision, wear-resistant.
  • The belts are widely used in automotive, textile, machine tools, office machinery, power tools, household appliances, instrumentation equipment, packaging equipment machinery, mining, petroleum, chemical and so on..
Check Stock

Anti-Rotation Bracket 0

  • The whole body is made of aluminum alloy, light and strong, convenient to use..
  • Widely used in all kinds of shaft transmission of mechanical device, such as the water pump (especially high power), chemical pump, fan, hydraulic machinery..
  • Suitable for petroleum machinery, printing machinery, textile machinery, chemical machinery, mining machinery, metallurgical machinery, aviation (helicopters), ships power transmission system..
  • Suitable for piston mechanical power transmission system, tracked vehicles, as well as generating set high power mechanical drive system, the dynamic balances after applied in transmission shafting were common..
  • Quality assurance, easy and convenient to use, having long service life..
Check Stock

BEMONOC Pack of 2pcs HTD 3M Round Rubber Timing Belts Closed-Loop 201mm Length 67 Teeth 15mm Width Industrial Drive Belts

  • Fiberglass Tensile Cord - High dimensional stability and maximum flexibility engineered and tested for highly wear resistant performance.
  • Nylon Tooth Cover - Durability and wear resistance, increased power capacity.
  • Timing belt efficient transmission, low noise, oil resistance, fatigue, inflexible, non-stretch, high precision, wear-resistant.
  • The belts are widely used in automotive, textile, machine tools, office machinery, power tools, household appliances, instrumentation equipment, packaging equipment machinery, mining, petroleum, chemical and so on..
Check Stock

HANTUO 20V Cordless Grease Gun, Electric Grease Gun Professional High Pressure 10000 PSI Cordless Grease Guns, Inclued Battery with Carrying Case

  • EXCELLENT POWER:The Cordless Grease Guns Powered with 20-volt motor delivers 12000 PSI max operating pressure, pushes up to 5.0 oz/min high-flow applications..
  • Multifunctional Electric Grease Gun: This electric grease gun both barreled oil and cartridge lubricants can be used, which makes the oil easy and convenient to use..
  • Large-capacity Battery: This electric grease gun with a 3000 mah large-capacity rechargeable lithium battery, which can work continuously for 30-40 minutes when fully charged. It takes 2-3 hours to fully charge the battery..
  • LIGHTWEIGHT:This electric grease gun is labor-saving, fast, easy to operate, small in size, light in weight, It also has a carrying case, which is very easy to carry and store..
  • Wide Application: This electric grease gun is widely used in motor vehicles, heavy machinery, ships, automobiles, mechanical equipment, agricultural machinery, engineering vehicles can all be oiled and maintained with a powered grease gun..
Check Stock

7 Sizes Belleville Stainless Steel Flat Compression Spring Disc Locking Washers Electrical Connection Assortment Set Bronze

  • This flat washers has heavy load, short stroke, and require small space, which is often used in combination of mechanical and electronic components.
  • Easy to repair and replace, high economic security, suitable for precision heavy machinery, this flat washers set has many different size to meet with your demand..
  • This style of disc spring has a larger deformation energy per unit volume than other types of springs and good buffer shock absorption capacity..
  • Made of high quality stainless steel, corrosion resistant, with variable stiffness characteristics, this disc spring is great for for electrical connections for home, automotive, and shop use..
  • The flat washers is often used as a strong buffer and shock absorber in heavy machinery, it is also a compacting device for clutches, safety valves, pressure reducing valves, etc.
Check Stock

36774321 Drive Coupler for Ingersoll Rand Doosan Portable Air Compressor Replacement Part Flexible Coupling Slotted Disc

  • The whole body is made of aluminum alloy, light and strong, convenient to use..
  • Widely used in all kinds of shaft transmission of mechanical device, such as the water pump (especially high power), chemical pump, fan, hydraulic machinery..
  • Suitable for petroleum machinery, printing machinery, textile machinery, chemical machinery, mining machinery, metallurgical machinery, aviation (helicopters), ships power transmission system..
  • Suitable for piston mechanical power transmission system, tracked vehicles, as well as generating set high power mechanical drive system, the dynamic balances after applied in transmission shafting were common..
  • Quality assurance, easy and convenient to use, having long service life..
Check Stock

Lever Chain Hoist 2200LBS 10FT, 1T 3M Lever Chain Hoist 1 ton Commercial Portable Hooks for Building Garages Warehouse Automotive Machinery【1T\\/3m】

  • ...ft.The ratchet lever chain hoist is equipped with a handle that has a non-slip rubber overlay with a unique texture which is easy to operate.
  • 【Wide Application Field】The lever chain hoist is mainly used in factories, mines, construction sites, wharves, docks, warehouses and other places for the installation of machinery, lifting goods, raising machinery for maintenance, and especially for open-air and unpowered operations.
  • It’s also a good birthday gift choice for your gearhead husband.
Check Stock