Reviews High Temperature Adhesive

8 Pack Sticky Adhesive Compatible with Socket Mount Base, PKYAA Double-Sided Replacement Tape for Car Magnetic Phone Holder, 4 Pack Sticker Pads for Collapsible Grip & Stand Base

  • 【PKYAA Very High Bond Sticky Adhesive Replacement Superior Performance】PKYAA offer original Very High Bond super-adhesive is 40% stronger than ordinary black sticky, high temperature resistant and low temperature resistant. PKYAA sticky adhesive is extremely compatible with the base and back..
  • 【8 Pcs 0.91" Very High Bond Adhesive Compatible with Socket Mounts Base 】The 23mm(0.91") double side sticky adhesive can be used on the bottom of Socket car mounts, magnetic car mounts, instrument panel cam holders, gps holders and vent mount to maintain stability even on rough roads..
  • 【4 Pcs 1.38" Very High Bond Adhesive Compatible with Socket Base】PKYAA offers 4Pcs Very High Bond double side sticky adhesive compatible with Socket Base, the adhesive is 35mm(1.38") and fit out-stand base perfectly..
  • 【Easy to Use】Please clean the adhesive surface before use and let it dry, free of contaminates. And wait at least 24 hours to use after stuck. First peel off the white side of the adhesive and stick it to the car mount base. After applying some pressure on the adhesive, peel off the red film side of the adhesive and stick the car mount to your car dashboard..
  • 【Durability】These Double-sided stickers roll with pressure sensitive adhesive bonds almost i....
Check Stock

3M VHB Tape 4611, 0.375 in width x 36 yd length, 1 roll

  • Applications: the acrylic adhesive allows instant bonding. This double-sided tape is used in applications like bonding of finishing trims and moldings in the automobile, heavy-duty vehicle, and equipment industries.
  • Temperature Resistant: the permanent bonding adhesive has a high temperature resistance. Being resistant to UV light, moisture, solvents, and harsh chemicals, the adhesive tape can bond and seal even in extreme environments.
  • Fast and easy-to-use: this two-sided tape guarantees a smooth surface appearance and creates a high strength bond between substrates without the need of rivets, spot welds, screws, and liquid adhesives.
  • Compatibility: this firm foam tape perfectly bonds to glass and high surface energy bare metal surfaces, such as aluminum, galvanized steel, and stainless steel. The acrylic tape offers design flexibility due to its viscoelastic properties.
  • Product Specifications: this high-bonding adhesive tape is 0.045 in. thick and measures 0.375 in. (width) x 108 ft. (length). Designed in dark gray, the bonding tape is layered with general-purpose adhesive on both the sides.
Check Stock

Joseking Resin Tape for Epoxy Resin Molding,High Temperature Resistance PET Silicone Adhesive Tape,Easy Peeling and Remove Residue Epoxy Release Tape for River Tables (2 Inches x20 Yards), Green

  • High Temperature Resistance & No Melting— Joseking resin tape is made of High-Quality PET film with high temperature resistant silicone.It has a high temperature resistance up to 200°C in a short period of time (about 30 minutes).The combination of water resistance and abrasion resistance makes it suitable for high temperature process projects such as painting, plating, and circuit boards,etc.Prevent curling, shrinkage and edge warping, making them perfect for your craft projects..
  • Easy To Peel & No Adhesive Residue— Due to the nature of the product, Joseking resin tape is self-adhesive and easy to apply with moderate viscosity when in use.It is also easy to peel off and remove cleanly without leaving any residue.Our epoxy resin tape can be used when you are working with 2 part epoxy molds,an epoxy resin table or as an encapsulation tape can be used to produce beautiful lines..
  • Chemical & UV Resistant— This epoxy tape is not only high heat resistant but also acid and alkali resistant and corrosion resistant.It retains adhesive properties when exposed to chemicals, high heat and light.It is ideal for crafting and working with professional marine grade epoxy..
  • Thermal Silicone Adhesive Tape For Powder Coating— It can be used as powder coating tap....
Check Stock

3M VHB Tape 4611, 2 in width x 5 yd length, 1 roll

  • Temperature Resistant: the permanent bonding adhesive has a high-temperature resistance. Being resistant to UV light, moisture, solvents, and harsh chemicals, the adhesive tape can bond and seal even in extreme environments.
  • Quick Assembly: this two-sided tape guarantees a smooth surface appearance and creates an easy and quick bonding between substrates without the need of rivets, spot welds, screws, and liquid adhesives.
  • Compatibility: this firm foam tape perfectly bonds to glass and high surface energy bare metal surfaces, such as aluminum, galvanized steel, and stainless steel. The acrylic tape offers design flexibility due to its viscoelastic foam core.
  • Product Specifications: this high-bonding adhesive tape is 0.045 in. thick and measures 2 in. (width) x 15 ft. (length). Designed in dark gray, the bonding tape is layered with general-purpose adhesive on both the sides.
  • A high-bonding adhesive, 3M VHB 4611 Tape is specially designed for maintaining a flexible and permanent bonding between different substrates. The two-sided tape is coated with multipurpose adhesive on both sides and made resistant to hot, cold, and cycling temperatures. With an exceptional strength, the double-sided tape provides strong adhesion, eliminating the need for drillin....
Check Stock

3M 4611/GRY136 Scotch 4611 VHB Tape: 1" x 36 yd, Dark Gray

  • 3M 4611 VHB Tape is a double-sided tape typically used on metal substrates, and has the added feature of high-temperature resistance, making it suitable for bonding prior to high-temperature paint processing..
  • 3M 4611 is coated with a general-purpose adhesive on both sides of the firm foam. Please note, as stated in 3M’s data sheet for this product, it ships on a plain red film release liner (not a printed 3M liner like other 3M VHB tapes)..
  • Virtually invisible, 3M VHB Tape provides the convenience and simplicity of a tape fastener and is ideal for use in many interior and exterior structural bonding applications. In many situations, VHB tape can replace rivets, spot welds, liquid adhesives, and other permanent fasteners..
  • These VHB tapes are made with an acrylic foam which is viscoelastic in nature. This gives the foam energy absorbing and stress relaxing properties which provides these tapes with their unique characteristics. The acrylic chemistry provides outstanding durability performance and the tapes have excellent durability, solvent and moisture resistance..
  • Carrier/Backing: closed-cell acrylic foam (firm). Adhesive: general-purpose acrylic. Release Liner: PE film (solid red / not-printed). Thickness: 50 mils (carrier, adhesive, liner) ....
Check Stock

3M 4611/DGRAY0755 Scotch 4611 VHB Tape: 3/4" x 15 ft, Dark Gray

  • 3M 4611 VHB Tape is a double-sided tape typically used on metal substrates, and has the added feature of high-temperature resistance, making it suitable for bonding prior to high-temperature paint processing..
  • 3M 4611 is coated with a general-purpose adhesive on both sides of the firm foam. Please note, as stated in 3M’s data sheet for this product, it ships on a plain red film release liner (not a printed 3M liner like other 3M VHB tapes)..
  • Virtually invisible, 3M VHB Tape provides the convenience and simplicity of a tape fastener and is ideal for use in many interior and exterior structural bonding applications. In many situations, VHB tape can replace rivets, spot welds, liquid adhesives, and other permanent fasteners..
  • These VHB tapes are made with an acrylic foam which is viscoelastic in nature. This gives the foam energy absorbing and stress relaxing properties which provides these tapes with their unique characteristics. The acrylic chemistry provides outstanding durability performance and the tapes have excellent durability, solvent and moisture resistance..
  • Carrier/Backing: closed-cell acrylic foam (firm). Adhesive: general-purpose acrylic. Release Liner: PE film (solid red / not-printed). Thickness: 50 mils (carrier, adhesive, liner) ....
Check Stock

Everrich Automotive Electric Silicone Heating Pad, 5.11 x 3.54 Inch 110V 120W – Waterproof High Heat Transfer Car Heated Wrap Mat

  • 1.KEEP ENGINE WARM: On a cold winter day, use the Everrich Automotive Electric Silicone Heating Pad, 5.11 x 3.54 Inch 110V 120W – Waterproof High Heat Transfer Car Heated Wrap Mat 10 or 15 minutes prior to start up for perfect engine oil temperature.
  • Device heats the oil quickly for those cold start mornings..
  • 2.SAFE AND FAST HEATING: Uniform temperature, high thermal efficiency, high strength, easy to use, safe life for up to two years, not easy to aging.Well waterproof performance, fast temperature rising, temperature uniformity,High thermal efficiency, well toughness. Conform to the American UL94 level V0 flame resistant standard..
  • 3.EASY INSTALLATION- Use pressure-sensitive adhesive to stick it on the flat and smooth artifacts, The maximum service temperature of pressure sensitive adhesive: 150 degrees Celsius Continuous temperature, 220 degrees Celsius instantaneous temperature. Silicone rubber heater with pressure sensitive adhesive should be used in half a year after processing, otherwise it will influence on the performance of the glue using.Can be directly tied to the surface of heated objects..
  • 4.WIDE APPLICATION: Fit for All kinds of automobile fuel tank, water tank, storage battery, anti-freezing heat insulation.The silicon rubber ....
Check Stock

Permatex 27828 Body Shop Heavy Duty Headliner Adhesive High-Strength Spray Adhesive Repair Detached Or Loose Interior Parts Dries Clear Aerosol Can 16.75 Oz

  • Extreme Holding Power - High Strength And High Temperature Spray Adhesive.
  • Especially Effective In Repairing Automotive Headliners.
  • Easy Application- Permatex Headliner Adhesive Is Designed For Repairing Interior Parts That Have Become Detached Or Loosened.
  • Resist The Elements - Permatex Headliner Adhesive Is Resistant To Extreme Weather Conditions Like Rain.
  • And Snow Because Of The Water-Resistant Formula.
  • Professional Grade- Headliner Adhesive That Has A High Temperature Formula And Maintains High Strength At Temperatures Up To 170°F (77°C) For An Industrial Strength Hold.
  • And Other Interior Applications Where Material Has Become Detached Or Loose.
Check Stock

3M VHB 4611 Tape Roll - 0.5 in. x 15 ft. Dark Gray Acrylic Adhesive - Double Sided Tape with Firm Foam

  • Applications: the acrylic adhesive allows instant bonding. This double-sided tape is used in applications like bonding of finishing trims and moldings in the automobile, heavy-duty vehicle, and equipment industries.
  • Temperature Resistant: the permanent bonding adhesive has a high temperature resistance. Being resistant to UV light, moisture, solvents, and harsh chemicals, the adhesive tape can bond and seal even in extreme environments.
  • Quick Assembly: this two-sided tape guarantees a smooth surface appearance and creates an easy and quick bonding between substrates without the need of rivets, spot welds, screws, and liquid adhesives.
  • Compatibility: this firm foam tape perfectly bonds to glass and high surface energy bare metal surfaces, such as aluminum, galvanized steel, and stainless steel. The acrylic tape offers design flexibility due to its viscoelastic properties.
  • Product Specifications: this high-bonding adhesive tape is 0.045 in. thick and measures 0.5 in. (width) x 15 ft. (length). Designed in dark gray, the bonding tape is layered with general-purpose adhesive on both the sides.
Check Stock

Dashboard Pad Mounting Disk Sticky Adhesive Replacement Kit PKYAA 3pcs 2.76 70mm Circle Heat Resistant Double-Sided Stickers for Suction Cup Car Phone Holder Disc & Windshield Dash Cam

  • 【3Pcs Clear Adhesives Replacement】PKYAA offers 3Pcs round clear sticky adhesive pads(Diameter: 2.76"/70mm,) for attaching dashboard pad mounting....
  • 【High Temperature Resistance Sticky Adhesive】These stickers have high temperature(120℃+) resistance performance. You can use it without worry in....
  • 【Easy to Install】Provided rounded rectangle raised label to easily peel off the red release film of the adhesive pads. When using, first easily....
  • 【Easy to Remove】These high-strength, double-sided adhesive pads let you quickly and easily create a long-lasting bond, bonding almost instantly....
  • 【Package includes】3 x 2.76"(70mm) round sticky adhesive. Please do not hesitate to contact us and we will provide you our best after-sale service..
Check Stock

High Temp Tape, FORTSPANG PTFE Coated Fiberglass Teflon Tape, High Temperature Adhesive Tape, Drying Conveyor Belt; Welding Sealing Tape Heat Resistant Up to 300℃ (50mmx10m)

  • 【Material】Teflon tape / PTFE roll with self-adhesive back. Width: 50 mm.
  • 【High quality】Our Teflon tape is pressure-resistant, corrosion-resistant, abrasion-resistant, high-temperature resistant, smooth surface, low-friction. High temperature resistance from -196 ° C to 300° C..
  • 【Widely used】Ideal for a variety of home and commercial projects such as high speed sealing machine, food packaging, hot melt machine, 3D printing, high temperature powder coating, etching etc..
  • 【Easy to use】Simply pull the tape off the roll and place it in the right place. Self-adhesive Teflon tape is easy to apply and remove without leaving any residue..
  • 【Make sure the equipment runs smoothly】Pressure-sensitive silicone adhesive tapes offer excellent drainage properties and non-stick coated surfaces, replace deteriorated or burned-out Teflon tape / PTFE tape so that machines and equipment can run smoothly and efficiently..
Check Stock

TSSART Resin Tape for Epoxy Resin Molding - Thermal Silicone Adhesive Tape, Oxidation and High Temperature Resistance Easy Peeling, Epoxy Release Tape for River Tables - 2 inch Wide 54FT Long

  • HIGH TEMPERATURE RESISTANCE: TSSART resin tape can withstand up to 200℃ for half an hour making it is able to work in craft projects like high-temperature paint,etc. Our resin tape won’t curl or melt like other tapes is perfect for your epoxy resin projects..
  • EASY PEELING: TSSART resin tape can be easy to peel without leaving adhesive residue which will destroy your work. This tape won’t stick to your finished resin epoxy and is easy to work with as it removes quickly and cleanly from resin epoxy. This premium resin tape works great when working with 2 part epoxy molds, an epoxy resin table or as an encapsulation tape..
  • CHEMICAL & UV RESISTANT: This epoxy resin tape retains adhesion when exposed to chemicals, high heat and light making it ideal for crafting and working with professional marine grade epoxy..
  • SILICONE ADHESIVE TAPE FOR POWDER COATING: This high heat silicone adhesive is suitable for high temperature applications and can be used as a powder coat tape and photo-splicing tape. This high temp silicone adhesive tape is heat and chemical resistant making it ideal for powder coating, splicing ,etc..
  • SATISFACTION GUARANTEED- TSSART stand behind our products 100% and if for any reason you are not completely satisfied, simply contact us and we....
Check Stock

TSSART Resin Tape for Epoxy Resin Molding - Thermal Silicone Adhesive Tape, Oxidation and High Temperature Resistance Easy Peeling, Epoxy Release Tape for River Tables - 5 inch Wide 108FT Long

  • HIGH TEMPERATURE RESISTANCE: TSSART resin tape can withstand up to 200℃ for half an hour making it is able to work in craft projects like high-temperature paint,etc. Our resin tape won’t curl or melt like other tapes is perfect for your epoxy resin projects..
  • EASY PEELING: TSSART resin tape can be easy to peel without leaving adhesive residue which will destroy your work. This tape won’t stick to your finished resin epoxy and is easy to work with as it removes quickly and cleanly from resin epoxy. This premium resin tape works great when working with 2 part epoxy molds, an epoxy resin table or as an encapsulation tape..
  • CHEMICAL & UV RESISTANT: This epoxy resin tape retains adhesion when exposed to chemicals, high heat and light making it ideal for crafting and working with professional marine grade epoxy..
  • SILICONE ADHESIVE TAPE FOR POWDER COATING: This high heat silicone adhesive is suitable for high temperature applications and can be used as a powder coat tape and photo-splicing tape. This high temp silicone adhesive tape is heat and chemical resistant making it ideal for powder coating, splicing ,etc..
  • SATISFACTION GUARANTEED- TSSART stand behind our products 100% and if for any reason you are not completely satisfied, simply contact us and we....
Check Stock