Reviews High Speed Milling

Milling Cutter, 3.175x2x17mm Straight Shank Engraving Good Durability Spiral Milling Cutter Tungsten Steel Milling Cutter Milling Cutter Single for Repair Tool

  • Made of tungsten steel material, with high hardness and strength, wear resistance and corrosion resistance..
  • The milling cutter is a single‑flute spiral milling cutter with fast processing speed and good chip removal effect..
  • The blade adopts mirror grinding technology, the appearance is not rough, and the milling is glossy..
  • The milling cutter is mainly used for plane milling, notch milling, step face milling and profiling milling..
  • The kit contains 5 spiral milling cutters, with standard size, often used in CNC engraving machine..
Check Stock

Milling Bronze Gear,Power Feed Bronze Gear Bridgeport for Bridgeport Milling Machine

  • 【BASIC PARAMETERS】GPOAS X-Axis power feed is made of aluminuml.
  • Power Parameter:90Watt,110V input voltage,50/60Hz,single phase.
  • Rotate Speed:0-200 RPM.Max Torque:450in-lb.
  • Max return speed: 850mm/min.This power feed fits some milling machines like Bridgeport, Precision Matthews, Enco, Jet, Sharp, Acer, Webb, etc....
  • 【PORTABLE AND EASY TO INSTALL】This power feed for milling machine is compact and portable.Weight: 3.75kg/8.27lbs, Size: 7*3.5*12.8 inch. And whether it is for a novice or a skilled operator, it is very easy to install this power feed according to the instruction and online video or by yourself.After-sales:You will get worry-free 18-month warranty and lifelong technical guidance..
  • 【STABLE AND EFFICIENT】This power feed adopts Gleason Spiral Bevel Gear with advantages of stable transmission ratio,low transmission noise,high transmission efficiency and high bearing capacity.And when fast transmission, if the tool collides with the workpiece or reverses instantaneously, the special safety device protects the transmission plastic gear and electronic parts from damage..
  • 【AUTOMATIC AND MANUAL CONTROL】You can set this power feed to work at automatic constant speed to free your hands or work by manually adjusting....
Check Stock

Milling on the Drill Press (DVD, 4 Hours)

  • 【Much More Powerful】The motor power of RCOG-25V milling drilling machine has a 1100W brushless spindle drive motor providing tremendous torque and variable speeds from 50-22250 RPM continuously, with overload and overheating protection fuction.The noise of this motor is very low and it is very easy to maintain.So much power will make your work much more efficient..
  • 【Parameters】Metric Scale MT3 Milling Machine adopts high precision grinding all steel spindle with excellent strength grinding gear,X axis:18.9",Y axis:6.9",Z axis:11",it has own DRO for 3 axis.Headstock swivels 360 degrees.Max drilling diameter:0.9",Max Face screening capacity:2.5",Max vertical milling capacity:0.79",Distance from spindle to table:13.8",Spindle taper:MT3,Table size:27.5"x7.1".The speed display shows inch..
  • 【Micro-Feed Precision】Benchtop Milling Drilling Machine has a micro-feed function,the accuracy is up to 0.01'', only need to tighten the middle nut of the right hand wheel to achieve the micro-feed function, loosen the nut to achieve the manual up and down movement function.Integrated cross worktable,width is widened,with high pr....
Check Stock

Half Round Keyway Milling Cutter, Hss Straight Shank T Slot Milling Cutter, 3 x 16 x 10mm Milling Cutter Milling Tool Milling Cutter

  • APPLICABLE MATERIALS: Widely used for milling steel, aluminum, copper and iron materials..
  • HIGH-SPEED STEEL MATERIAL: The high-speed steel material is used, and the metric system has a straight handle, which is easy to use and very practical..
  • HIGH WORK EFFICIENCY: Woodruff key-seat milling cutter, convenient for CNC machining, improve work efficiency..
  • T-SLOT MILLING CUTTER: T-slot milling cutter, stable structure, excellent performance and long service life..
  • SIZE: Woodruff key position cutter blade width is 3mm / 0.1in, outer diameter is about 16mm / 0.6in, and the handle diameter is 10 mm/0.4 inches..
Check Stock

uxcell 1/8" Shank 0.8mm x 3mm Carbide End Mill CNC Router Bits 2 Flute Milling Bit for Acrylic PVC MDF Wood

  • 1/8 Inch CNC Bits: Shank Diameter: 3.175mm / 1/8".
  • Wide Applications: CNC router bits are suitable for Acrylic, PVC, Wood, Nylon, Resin, ABS, MDF, Plywood, Hardwood. Good for 2D sculpturing, cutting, engraving, slotting, milling, etc. Works with milling and engraving machines..
  • Spiral & Sharp Router Bits: Large chip space design for fast and clean chip removal. Spiral sharp cutting edges provide smooth cuts and no burrs for increased efficiency, not easy to stick, precision ground..
  • Carbide End Mills: Tungsten carbide has good wear resistance, high strength and resistance to cutting temperatures. Carbide can run at higher speed than high-speed steel. Chamfered shank for ease of use.
  • Tips: Upcut milling bits can direct chips up and away from the milling area, leaving an unobstructed path to prevent tool breakage and extends the tool life. Properly reduce the cutting speed and feed rate to prolong the service life..
Check Stock

uxcell 5PCS 1/8" Shank 1.5mm x 12mm Carbide End Mill CNC Router Bits 2 Flute Milling Bit for Acrylic PVC MDF Wood

  • 1/8 Inch CNC Bits: Shank Diameter: 3.175mm / 1/8".
  • Wide Applications: CNC router bits are suitable for Acrylic, PVC, Wood, Nylon, Resin, ABS, MDF, Plywood, Hardwood. Good for 2D sculpturing, cutting, engraving, slotting, milling, etc. Works with milling and engraving machines..
  • Spiral & Sharp Router Bits: Large chip space design for fast and clean chip removal. Spiral sharp cutting edges provide smooth cuts and no burrs for increased efficiency, not easy to stick, precision ground..
  • Carbide End Mills: Tungsten carbide has good wear resistance, high strength and resistance to cutting temperatures. Carbide can run at higher speed than high-speed steel. Chamfered shank for ease of use.
  • Tips: Upcut milling bits can direct chips up and away from the milling area, leaving an unobstructed path to prevent tool breakage and extends the tool life. Properly reduce the cutting speed and feed rate to prolong the service life..
Check Stock

7pcs/Set Roughing End Mill HSS CNC 4 Flutes Milling Cutter End Mill Router Bit Roughing Chipbreaker Tool M6/M8/M10/M12/M14/M18/M20

  • MATERIAL: 4 flutes milling cutter end mill is adopted of high quality high speed steel for durable and long serving life.
  • EFFICIENCY: End mill cutter has good milling and cutting performance, ensure the high efficiency of the work..
  • HIGH QUALITY: Sufficient bending strength and wear resistance, slot milling, hole and the edge of the board, the surface is clean, neat, no glitches.
  • LONG LASTING: High strength, resistance to bending, breakage resistance, and have excellent physical properties, long tool life.
  • APPLICATION: Cnc router bits are suitable for CNC data processing center, carved, high-speed machines.
Check Stock

NiTi Reamer (Size 45-80# Length 25mm) 6 pieces

  • Material: Made of high-speed steel, with high hardness, sturdiness and durability, compact structure, and prolonged service life..
  • Good cutting ability: It has a sharp tip, strong cutting ability, high precision and long service life..
  • Excellent performance: The milling cutter has a sharp cutting edge, good cutting ability, and high precision, making the work easy and flexible..
  • Applicable to: It is widely applicable to steel, plastic, wood, copper, aluminum and other metal materials..
  • Wide range of uses: Milling reamers are widely used for boring processing, installed in drilling machines and milling machines, and suitable for reaming mold processing and manual processing..
Check Stock

HSS 12mm x 45 Degree Dovetail Cutter Milling End Mill High Speed Steel

  • Durable and Sturdy: This Dovetail Milling Cutter is made of high speed steel, so it is wear-resistant, durable, tough, and you can use it for a long time..
  • Uniform Angle Distribution: This Dovetail Milling Cutter featuring uniform angle distribution and double-edged design has more excellent cutting performance..
  • Wide Application:This milling cutter with fine workmanship and high quality is suitable for mold steel, alloy steel, carbon steel, tool steel, cast iron and more..
  • Meet Your Needs: Available in 45 and 60 degree, 8 and 10 flute, and 12mm,14mm,16mm,18mm, 20mm, and 25mm diameter, this Dovetail Milling Cutter can meet your needs..
  • Satisfaction Guarantee: We strive to bring the product to our customers. If you are not satisfied, please let us know, and we'll do our to make it right.
Check Stock

TECHTONGDA 600W Mill and Drill Brushless Motor Benchtop Drilling Milling Machine Variable Speed Mill 110V

  • ⚙Powerful function: This is a multi - functional drilling and milling machine, can complete drilling and milling operations. Also can be used for precision parts processing, sample processing and model..
  • ⚙Brushless motor: It USES a 600W brushless motor with strong power and easy maintenance..
  • ⚙All metal: It USES an integrated spindle and brass gear, which makes it not only precise but also durable..
  • ⚙Variable-Speed: Weather you need high speed or lower speed spindle operations this machine can handle it. Boasting a 50-2250 RPM spindle speed for the extreme precision your project needs..
  • ⚙Professional drill and mill: One machine for multiple purposes, iron plate, stainless steel plate, angle iron, wooden block, plank, etc. can be drilled and milled..
Check Stock

Micro 100 SFPM-050-10 Square End Mill - Upcut, 5 mm Cutter Dia, 16 mm LOC, 1 Fl, 5 mm Shank Dia, 50 mm OAL, Uncoated

  • END MILL CUTTER: Mill Cutter, usually used to be assembled on milling machine. Suitable for CNC data processing center, carved, high-speed machines..
  • WIDELY USE: Can milling of copper, aluminum, tool steel, cast iron, etc..
  • HIGH TOUGHNESS: High toughness, abrasion resistance, high-speed cutting for the high hardness..
  • EASY TO USE: Can processing directly or fine processing to the heat treatment mold..
  • SAVING TIME: Reducing the number of tool changes, improve machine actuator movement rhythm, save mold making time..
Check Stock

CNC Milling Cutter, Fulte Milling Cutter for Professional Use for Workshop Processing for Factory for Electronic Components

  • Completely worn and durable, making a strong guarantee for the service life of the milling cutter to ensure that the cutting sharpness is longer..
  • This 4 flute end drill uses micro‑grain tungsten steel base material, which has higher wear resistance and strength..
  • The tool is an exclusive milling cutter for high‑strength high‑speed cutting applications..
  • This cutting edge is acute and the exterior is free of burrs, making it easy to operate..
  • The ultra‑fine carbide materials can ensure its engraving and milling performance..
Check Stock

uxcell HSS Lathe Tool Bit 10mm x 10mm x 200mm, Square Lathe Turning Tool Blanks, High Speed Steel Rectangular Fly Cutter Mill Blank

  • Specifications: Size: 10mm x 10mm x 200mm, hardness HRC60~62. High-speed steel lathe tool bit.
  • General Purpose: HSS tool bit is a superior finishing tool for cuts in hard materials of mild steel, alloy and tool steel.
  • Versatile Tool Bit: Ideal for milling, turning, parting, engraving, drilling, punching, etc. Commonly used on a lathe, a milling machine fly cutter or a metal shaper.
  • Features: Parallel style cutter is with continuous width of cutting edge throughout length of tool bit.
  • High-speed Steel Tool: High-speed steel tool bit is with combination of hardness and toughness for wear resistance.
Check Stock