Reviews High Pressure Electric Valve

3/4\ Brass Electric Solenoid Valve,  110V Air Valve Normally Colsed for Water Air Gas Fuel Oil 2W-200-20

  • High quality 3/4inch Brass Electric Solenoid Valve： Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc.  .
  • Normally closed electric solenoid valve: 2 way solenoid valve,Model: 2W-200-20.
  •   3/4" NPT port,   Working temperature range: -5 ℃~80 ℃.
  •  Operating  Pressure: MIN.0kg/cm - MAX.10kg/com  .
  • This solenoid valve 110v was manufactured with a VITON seal,two-way inlet and outlet ports with standard female thread NPT connectionsm and heat and oil resistant Viton gasket.   .
  • Applicable Irrigation Controls (garden, Farm,etc.), Liquid Controls ( Pipeline, Artificial River Etc. and Air Controls ( Lab, Factory, Etc.) -3/4 inch Brass Electric Solenoid Valve Also known as110v solenoid valve,electric solenoid water valve,brass liquid solenoid valve. .
  • This valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, We will gladly replace it..
Check Stock

Tuttnauer 2340M Manual Autoclave

  • EASY TO OPERATE: Design of dual scale pressure gauge brings a convenient experience. This professional autoclave is basically a self-contained pressure canner with technical added accessories to make it easier to use as a pressure cooker..
  • PREVENT DRY BURNING - Upgrade of heating system to prevent dry burning. If the water volume is below a certain level, the machine will automatically power off. The steam autoclave is constructed from 304 stainless steel for superior durability and withstand temperature up to 1472°F..
  • DUAL HEATING SYSTEM OF ELECTRIC AND COAL: You can use fire heating to take effect without power. Rated working pressure of the pressure canner: 0.142~0.165MPa (20.59~23.92psi) and it’s rated working temperature is 126~128°C(259~262°F)..
  • 19 QT CAPACITY: The canning pot’s inner container capacity is 15.6 Quarts (11 in diameter*9.4 in high) makes it easy to create large batches, whether preparing make-ahead meals for the week or clean clothing and equipment..
  • TWO VALVE DESIGN: In order to avoid pressure explosion exceed, two pressure valves are designed on the lid to ensure the safety under high pressure. The safety valve will automatically open when the deflate valve fails..
Check Stock

20PSI High Pressure SUP Air Pump - Rechargeable SUP Pump 12V Stand Up Paddle Board Electric Pump Inflator/Deflator - Portable Air Compressor for Inflatables Boats,Tent,Stand Up Paddle Boards

  • ...er the SUP pump via car cigarette and USB Type-C Cable plug power cable..
  • 【FAST & POWERFUL Dual Motors - Inflator & Deflator】1st stage for MAXIMUM SPEED at 350L/min and 2nd stage for MAXIMUM SPEED at 70L/min. The AUTO-OFF FUNCTION turns the pump off when target pressure is reached when inflating. When packing up the deflation function will MAKE DEFLATING QUICK & EASY..
  • 【POWERED BY BATTERY OR 12V DC CAR CONNECTOR & REAL TIME PRESSURE MONITORING】Built-in 6000mAh Battery, easy and fast to inflate up 3 paddle boards, or connects to your car's 12V DC connector to make it work. Electric SUP pump digital display with real-time pressure monitoring with the integrated digital display, you can set the desired target pressure and monitor the pressure in real time..
  • 【FULL SET NOZZLES ATTACHMENTS】Features a 12A fuse for increased safety. Comes with full set of nozzles to fit most high pressure inflatables including C7 & H3 valve..
  • 【PACKAGE INCLUDE】1× Electric SUP Pump,1× User Manual,1× 3.3 feet High Pressure Hose ,1× 5 valve adapters,1× 11.2 feet DC....
Check Stock

Happybuy Electric Hydraulic Rebar Cutter, 900W Portable Electric Rebar Cut 5/8' 16mm #5 Rebar within 3 Seconds, 110V

  • ...y & Head: The electric bender machine adopts the sturdy machine body and high-intensity hook, which are stronger and not easy to break. It can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste. Multiple screws fixed on the head enforce the stability and sealing..
  • Precision Pressure Relief Valve: This hydraulic rebar bender features a precision pressure relief valve and a hydraulic-powered piston for strong thrust and less power consumption. After the steel bar is successfully bent, you can pull the pressure relief valve to move the steel, and the piston will return to its original position..
  • One Button Operation: This electric rebar machine is equipped with an ergonomic back grip design to facilitate maneuverability and ease of use. Simply keeping the switch pressed, the bending block starts to push forward. It is easy to bend rebar even in high air and is widely used in construction engineering for bending rebar, steel bar, steel rod, screw thread steel, carbon steel, round steel, etc..
Check Stock

VEVOR 1.5 KW Electric Rebar Bender, 1''(25 mm) Hydraulic Electric Hand Held Rebar Bender, within 5 s, 110 V

  • ...y & Head: The electric bender machine adopts the sturdy machine body and high-intensity hook, which are stronger and not easy to break. It can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste. Multiple screws fixed on the head enforce the stability and sealing..
  • Precision Pressure Relief Valve: This hydraulic rebar bender features a precision pressure relief valve and a hydraulic-powered piston for strong thrust and less power consumption. After the steel bar is successfully bent, you can pull the pressure relief valve to move the steel, and the piston will return to its original position..
  • One Button Operation: This electric rebar machine is equipped with an ergonomic back grip design to facilitate maneuverability and ease of use. Simply keeping the switch pressed, the bending block starts to push forward. It is easy to bend rebar even in high air and is widely used in construction engineering for bending rebar, steel bar, steel rod, screw thread steel, carbon steel, round steel, etc..
Check Stock

Carbon Steel Mini Needle Valve - with Round Knob 1/4\ NPT 6000 PSI DAIRAZAN

  • 【Size】Male Thread 1/4" NPT x 1/4" NPT for connecting female threaded pipe fittings..
  • 【Material】Made of solid brass for strength, corrosion resistance, ductility at high temperatures, and low magnetic permeability. It is nickel plated so that it is anti-rust and corrosion resistant..
  • 【High Quality】High pressure brass needle valve, stable smooth delicate tightness practical. The brass needle valve is clean and bright inside, and the ruler can be controlled accurately. Its exquisite processing, can withstand greater pressure than other types of valves, strong connection, high pressure resistance, good sealing performance and repeatable installation..
  • 【Easy to Use】The product is easy to install and maintain, and it is safe and reliable to work. If you need a long time and stable control, it is best to use it with a regulator..
  • 【Widely Applications】Needle valve is an important part of the instrument measurement pipeline system, used to adjust the flow to the instrument or other industrial applications, open or cut off the pipeline path. Generally used in water, steam, gas, oil and other media with smaller flow and higher pressure. It is often used in industrial automatic control piping systems such as ships, oil refining, chemical, electri....
Check Stock

SMACO Scuba Tank 1L Mini Scuba Tank S400 Scuba Diving Tank Diving Equipment

  • ...equipped portable bag, you can easily carry it and free your hands to do more underwater. You can also split regulator and tank body and put them in the portable case, then you can take them on plane to diving in any place..
  • ✅【PERFECT COMPATIBILITY】 : The scuba tank’s inflation interface is 8mm, and the work pressure is 3000Psi/200Bar/20Mpa. It has three inflate ways: scuba adapter, electric pump and SMACO high pressure hand pump. When inflate with electric pump, please equipped with oil-water separator.
  • when use other hand pumps, please make sure it can reach up to 3000Psi. NOTE: using the hand pump to reach up to 3000Psi is tired, it takes about 30-45 minutes, we suggest to use it as a backup inflation devices..
  • ✅【HIGHT QUALITY MINI SCUBA TANK】: The tank body was made of aviation aluminum, can better resists to seawater corrosion and stands up well to damage. The regulator include inflation interface(8mm), pressure gauge, air switch, explosion valve, constant pressure valve. and the second-stage valve include mouthpiece, relief valve and breath tube. When normal used, all the parts could work for at least 2 years, and we also provide some free accessories in the accessories bag..
  • ✅【PROFESSIONAL SCUBA TANK WITH DOT CERTIFIED 】:Our m....
Check Stock

20PSI High Pressure SUP Electric Air Pump,Dual Stage Inflation Paddle Board Pump for Inflatable Stand Up Paddle Boards, Boats,Kayak,12V DC Car Connector

  • 【Built in Air Inflator & Deflator】The max pressure of Tuomico paddleboard pump is 20 PSI, Ideal for use on high-pressure inflatables, can inflate and deflate the SUP, Tent and other inflatables quickly. Usually, It takes about 10 minutes to pump up a regular iSUP..
  • 【Digital Pressure LCD Screen & Auto Shut-Off】Accurate air pressure value, accurate to 0.01PSI. Selectable pressure units to PSI / Bar so you can set the pressure at your target level to prevent over inflation.Select your desired pressure and pumps right up and stops on its own. The fully automatic operation makes inflating or deflating ISUP, inflatable tents, inflatable raft,kayak a breeze..
  • 【Extra 5 Universal Valve Adapters】Work with inflatables that use the universal HR valve such as stand-up paddle board, kayak.The Isup pump can also inflate yoga ball,inflatable boats, inflatable dinghy, pool floating, inflatable sofa, inflatable tent, etc..
  • 【DC Car Power Cord Included】 With 11.2 feet DC car power cord ,It is easy to us. Just plug it into cigarette lighter outlet of your car and s it on. 3.3 feet flexible air hose make it more convenien....
Check Stock

'GJS Gourmet Floating Valve (or Float Valve) and Seal Ring Compatible With Fagor LUX Multi-Cooker Electric Pressure Cooker - 670041880'. This valve is not created or sold by Fagor.

  • “GJS Gourmet Floating Valve (or Float Valve) and Seal Ring Compatible With Fagor LUX Multi-Cooker Electric Pressure Cooker – 670041880”. This valve is not created or sold by Fagor..
  • Float Valve is part of the lid of a pressure cooker, and is essential for the pressure cooker to work.
  • Under normal situation, Float Valve inserts into the lid from outside to inside. Sealing Ring locks the Float Valve from inside, keeping the Float Valve in place.
  • Sealing Ring is often washed off, leaving the Float Valve loose and the pressure cooker unusable because the steam leaks.
  • This spare part can make your disabled cooker work like new.
Check Stock

SMACO Scuba Tank 1L Mini Scuba Tank S400 Scuba Diving Tank Diving Equipment

  • ...e equipped portable bag, you can easily carry it and free your hands to do more underwater. You can also split regulator and tank body and put them in the portable case, then you can take them on plane to diving in any place..
  • ✅【PERFECT COMPATIBILITY】 : The scuba tank's inflation interface is 8mm, and the work pressure is 3000Psi/200Bar/20Mpa. It has three inflate ways: scuba adapter, electric pump and SMACO high pressure hand pump. When inflate with electric pump, please equipped with oil-water separator.
  • when use other hand pumps, please make sure it can reach up to 3000Psi. NOTE: using the hand pump to reach up to 3000Psi is tired, it takes about 30-45 minutes, we suggest to use it as a backup inflation devices.
  • ✅【HIGH QUALITY MINI SCUBA TANK】: The tank body was made of aviation aluminum, can better resists to seawater corrosion and stands up well to damage. The regulator include inflation interface(8mm), pressure gauge, air switch, explosion valve, constant pressure valve. and the second-stage valve include mouthpiece, relief valve and breath tube. When normal used, all the parts could work for at least 2 years, and we also provide some free accessories in the accessories bag..
  • ✅【PROFESSIONAL SCUBA TANK WITH DOT CERTIFIED 】:Our min....
Check Stock

SMACO Scuba Tank 1L Mini Scuba Tank S400 Scuba Diving Tank Diving Equipment

  • ..., with the equipped portable bag, you can easily carry it and free your hands to do more underwater. You can also split regulator and tank body and put them in the portable case, then you can take them on plane to diving in any place..
  • PERFECT COMPATIBILITY : The scuba tank's inflation interface is 8mm, and the work pressure is 3000Psi/200Bar/20Mpa. It has three inflate ways: scuba adapter, electric pump and SMACO high pressure hand pump. When inflate with electric pump, please equipped with oil-water separator.
  • when use other hand pumps, please make sure it can reach up to 3000Psi. NOTE: using the hand pump to reach up to 3000Psi is tired, it takes about 30-45 minutes, we suggest to use it as a backup inflation devices..
  • HIGH QUALITY MINI SCUBA TANK: The tank body was made of aviation aluminum, can better resists to seawater corrosion and stands up well to damage. The regulator include inflation interface(8mm), pressure gauge, air switch, explosion valve, constant pressure valve. and the second-stage valve include mouthpiece, relief valve and breath tube. When normal used, all the parts could work for at least 2 years, and we also provide some free accessories in the accessories bag..
  • PROFESSIONAL SCUBA TANK WITH DOT CERTIFIED :Our mini scuba tank have....
Check Stock

Alamic Replacement Float Valve for Fagor LUX Multi-Cooker Electric Pressure Cooker - 670041880

  • Alamic replacement float valve for fagor lux multi-cooker electric pressure cooker – 670041880.
  • Float valve and sealer are small part that play a big role in how your pressure cooker works.
  • The silicone seal does wear out overtime from all the heat and pressure in the cooker. You might also lose one when you’re washing the lid so it’s good to have some spares around..
  • Well made. High quality and durable. Sealer is made from safe durable silicone, no odor..
  • This spare part can make your disabled cooker work like new..
Check Stock

Hitachi Pilot Unloader Check valve Combo for Gas Compressors 885426 EC2510E

  • Replaces Hitachi 885426 for EC2510E Gas Compressors 110 - 140 PSI Made in USA.
  • Check valve /Unloader valve / Pilot valve all in one - (continuous run unloader) for gas & electric powered air compressors.
  • 110 - 140 PSI factory setting. pressure can be adjusted 30-40 psi up or down.
  • 1/2" Metric Flare TOP Inlet x 3/8" Male Pipe Thread outlet to air tank.
  • 30 scfm Rating ! Pressure can be adjusted 30-40 PSI Higher or Lower. If pressure adjustment is needed, Please see Pic attachment for adjustment instructions..
Check Stock