Reviews High Pressure Adapters

DKwoeshg Cooling System Pressure Tester Kit - Coolant System Leak Check Tool Set, Radiator Tester and Pressure Gauge to Diagnose Radiator, Heater Core and Head Gasket Problems for Most Vehicles

  • Comprehensive testing: Our coolant pressure tester kit includes various adapters that enable you to test several types of radiators and cooling systems, you will receive 1 pressure test pump with pressure gauge 1 thermometer 4 chrome plated steel cap adapters 8 anodized aluminum cap adapters 1 carrying case..
  • Superior Quality: Made from high-quality aluminum, this coolant pressure tester kit is built for durability and long-lasting performance..
  • Accurate Readings: The kit allows accurate pressure readings of up to 35 PSI, enabling you to diagnose any coolant system leaks or issues with ease..
  • Wide Compatibility: With multiple adapters and connection options, compatible with Audi, Alfa, BMW, Benz, Chrysler, Citroen, Ford, Honda, Mazda, Mercedes, Mitsubishi, Nissan, Opel, Peugeot, Renault, Rover, Saab, Suzuki, Toyota, Volvo, VW, Jeep, Lexus, GM, Subaru, including cars, trucks, and SUVs..
  • Leak detection made easy: This radiator pressure tester helps to quickly identify coolant leaks in your vehicle, saving you time and money on expensive repairs..
Check Stock

YSTOOL Oil Pressure Tester Kit Professional Oil Pressure Gauge Tool for Engine Diagnostic Test with Hose Adapters and Carry Case for Cars ATVs Trucks Use 0-140psi

  • The engine oil pressure tester kit is used to diagnose and test the engine oil pressure value, to check whether it is normal. Prevent engine failure due to lack of oil. And with this best in class tools, you can get a definite pressure value well without relying on the dashboard light..
  • There are 10 types of thread adapters are suitable for most cars, motorcycles, boats and other vehicles with gasoline and small diesel engines. As long as the adapters can match with your engine and oil pressure does not exceed 140 PSI. The 10 adapters are marked with number, you can choose the right one very easy..
  • The pressure gauge uses metal gauge head with shockproof rubber cover, 3" big dial with clear dual scale range 0 to 140 PSI and 0 to 10 Bar. Compare to a large range, this oil pressure gauge is easy to read about 1-2 Bar with a short range. There are a straight quick coupler and a elbow one in the case, you can choose it according to the location of the engine oil pressure test port..
  • Steel adapters, brass quick couplers, are featured with high hardness, rustless, durable and good air sealing. The 4FT long hose is made of rubber nylon resin with MAX. working pressure 300 PSI. There are also a small bag of seal gaskets, which are used for replacing the ones on....
Check Stock

CTA Tools 1079 4 Piece Universal Radiator Test Kit

  • Kit Includes pressure tester connector with 3 adapters to fit almost all cooling systems.
  • Adapters cover all diameters from 17mm to 40mm.
  • Elastomeric adapters with wide diameter ratings.
  • All adapters with O-rings. Connector works with all standard pressure tester pumps.
  • Connector manufactured from aluminum, Steel & durable plastic.
Check Stock

Boltigen Car A/C R134a R1234yf Quick Coupler, R134a to R1234yf Quick Adjustable Adapter Connector Conversion Kit for AC Refrigerant Charging

  • 【R134a Quick Adapter】This set of two R134a quick couplers works perfectly with R134a service ports.
  • provided adapters also ensure compatibility with 1/4-inch male flare fittings. 6-ball design of these high and low-pressure R134a quick couplers also provides superior protection against wasteful refrigerant leakage..
  • 【R1234YF Quick Coupler】Blue R1234YF Low Side adapter: Low side R1234yf coupler 14 mm female x 1/4"SAE male. R12 to R134a Adapter Connector: 1/4" SAE female x low pressure 13mm R134A quick coupler. Red R1234YF High Side Quick Coupler: High side R1234yf coupler 17 mm female x 1/4"SAE male. R12 to R134a Adapter Connector: 1/4" SAE female x High pressure 16mm R134A quick coupler..
  • 【Car Quick Adapter Kit】 R-134a adapters with r134a convert to r-1234yf adapters ideal for connecting with basic or advanced manifold gauges and serving on automotive air conditioner refrigerant recharge work..
  • 【No Leakage】The combination of the ball lock design and rubber seal provides excellent sealing performance. AC gauge adapter set with automatic closing function, easier and more convenient to disassemble and install..
  • 【Material】The R134a R1234YF adapters are made of brass, aluminum and steel materials for long lasting, featuring different tempe....
Check Stock

Raincovo Pressure Washer Quick Connect Fittings, M22 14mm to 3/8 Inch Quick Connect Pressure Washer Hose Adapter, 4 Pieces

  • Includes 4 pieces adapters. Pressure washer quick connect fittings make it easier and faster to setup and takedown the hose..
  • Pressure washer adapters are used for power washer gun, hose and pump connections..
  • M22 14mm thread fittings are well made. Advanced technology to ensure the high precision of thread and no leaks..
  • 3/8 Inch quick connect fittings are great for snap. Very smooth to attach and release..
  • Made of brass, high build quality ensures long life. Max pressure is 4500 PSI. Max working temperature is 300 °F..
Check Stock

BACOENG Complete AC Repair Tool Kit for Mini Split/HVAC/AUTO with Tool Bag - Includes 3.6CFM Vacuum Pump, 800PSI Manifold Gauge Kit

  • 【Complete Kit】-an complete refrigerant injection kit for MINI/HVAC/AUTO AC system, with a large-capacity tool bag that can carry all the accessories needed at one time..
  • 【Manifold Gauge】-You could directly read the temperature(℉) and pressure(psi) of R12/R22/R134a/R410a refrigerant on the professional dial. This gauge could be hung on the car/air conditioner cover or other high places through the top hook, freeing your hands for more works..
  • 【Heavy Pressure Hose】-with three high-strength pressure hoses, red for high-pressure pipes, blue for low-pressure pipes, yellow for vacuum pumps.
  • 5FT long for each one, 1/4 SAE to 1/4 SAE, 800 PSI working pressure.
  • 【Powerful Vacuum Pump】-It delivers 3.6 CFM flow rate and 150 Micron vacuum with low noise, which guarantees the vacuum steady of the system. It also make your work moveable and easy to start on its design of handle and manual switch. Motor thermal protection equipped..
  • 【Package include】-Vacuum pump*1 (with vacuum oil*1), manifold gauge*1, Pressure hose*3, car quick couplers*2, 5/16 SAE-....
Check Stock

DASBET 18PCS Radiator Pressure Leakage Tester Tool Kit, Automotive Cooling System Water Tank Leak Test Detector Set with Hand Pump and Nylon Adapters

  • Hand Pump Leak Detector: The radiator pressure test tool uses aluminum pump cylinder rather than plastic one, 21.2" rubber nylon resin hoses, brass fittings, solid and durable. 3" large dial gauge with index range 0 to 35psi (0 to 2.5bar), easy to observe. Chrome plated brass quick coupler with relief valve, can be connected to radiator adapters easily and quickly..
  • Leak Detection Tool: The hand pump leak detection tool pressurize on the reservoir, and watch for pointer drop over time to confirm system leak down. If there is any crack in the cooling system, the water in the tank will leak out under pressure, shows the fracture position, such as the tank, hose, a loose connection, etc. Check regularly, repair promptly, avoid leak result in the reduction of coolant and boiling point, cause high engine temperature, low oil viscosity and other serious problem.
  • Easy To Use: Remove the original radiator cap, choose an available radiator cap from the test kit and install it on radiator opening. Work the handpump till the pressure up to 10-15psi (Avoid up to 35psi). Check the gauge reading, if the reading drops automatically, it means that the leakage might o....
Check Stock

6.0 High Pressure Oil Pump IPR Valve Air Test Fitting Tool, High Pressure Oil Rail Adapters Leak Test Kit and 6.0 IPR Valve Socket with Seal Kit Fit for Ford 6.0L Powerstroke Diesel Engine

  • Fitment: IPR Valve Air Test Fitting and Oil Rail Adapters perfectly fit for Ford 6.0L powerstroke diesel high pressure oil system.
  • 6.0 IPR Valve Socket compatible with Ford 6.0L and other diesel engines, and Seal Kit fits for 2003-2010 Ford 6.0L V8 Diesel Turbocharged Modles.
  • High Quality: High Quality Machined from Brass or Steel with excellent mechanical and physical properties, these tool kit show their high tightness, corrosion resistance and durability.
  • Oil Rail Adapters: Both brass adapters use standard 1/4" NPT air hose connection, which allow observation of the High Pressure Oil System's Injector Control Pressure (ICP) by direct gauge connection, and facilitate testing of the High Pressure Oil System for leaks using shop air.
  • IPR Valve Air Test Fitting : This tool has 1/4 inch pipe threads to accept standard air fittings.
  • It takes the place of the IPR valve meaning that the system can be completely sealed so that even the smallest leaks can be detected.
  • 6.0 IPR Valve Socket with Seal Kit: Use with 3/8" square drive, 12 point design socket can tightly locate your IPR valve in a very tight location, also built to bottom out on the hex so it does not put torque on the connector in case it can be reused (Include IPR Valve Seal Kit OE Number 3C3Z9H52....
Check Stock

STYDDI Pressure Washer Quick Disconnect Adaptor Set, M22-15mm to 3/8\ Quick Release Couplers, All Solid Brass Connector Compatible with Sun Joe, Campbell, MI-T-M, Stanley Electric Pressure Washers

  • MAKE SET UP AND TEAR DOWN OF YOUR PRESSURE WASHER SYSTEM A BREEZE - STYDDI quick connect adapters convert the screw connections of a pressure washer system into quick connect/release, allowing you to quickly and easily connect or remove a high pressure hose. This quick connectors kit also helps to preserve the thread and seals on your components, extending the life of your pressure washer system..
  • 4-PACK UNIVERSAL PRESSURE WASHER QUICK RELEASE CONNECT SET - This pressure washer quick connect adapter set converts the M22-15mm thread-on couplings to a 3/8 inch quick connectors. It includes 1 x M22-15mm female + 3/8" quick connect plug, 1 x 3/8" quick connect socket + M22-15mm male, 1 x M22-15mm female + 3/8" quick connect socket, 1 x 3/8" quick connect plug + M22-15mm male..
  • ALL SOLID BRASS FOR A SAFE AND LEAK-FREE CONNECTION - These quick connect adapters are all made of premium 100% brass, which is corrosion and rust proof. They are durable and sturdy, providing a secure and firm connection without water leak or pressure loss. They are no only convenient for frequent connect and disconnect but also offer a long service life without much maintenance..
  • TOP PERFORMANCE AND WIDE APPLICABILITY - These quick connect adapters provide secure and quick connectio....
Check Stock

Sunluway 6.0 High Pressure Oil Pump IPR Valve Air Test Fitting Tool and High Pressure Oil Rail Adapters Leak Test Kit Fit for Ford 6.0L Powerstroke Diesel Engine

  • Fitment: Perfectly fit for Ford 6.0L powerstroke diesel high pressure oil system.
  • High Quality: High Quality Machined from Brass or Steel with excellent mechanical and physical properties, these adapter fittings show their high tightness, corrosion resistance and durability.
  • Oil Rail Adapters: Both brass adapters use standard 1/4" NPT air hose connection, which allow observation of the High Pressure Oil System's Injector Control Pressure (ICP) by direct gauge connection, and facilitate testing of the High Pressure Oil System for leaks using shop air.
  • IPR Valve Air Test Fitting: This tool has 1/4 inch pipe threads to accept standard air fittings.
  • It takes the place of the IPR valve meaning that the system can be completely sealed so that even the smallest leaks can be detected.
  • 100% SATISFACTION GUARANTEE: If you're not 100% satisfied with Sunluway Fittings, simply return it for a full refund in 30 days. Premium Support & 12-Month Warranty.
Check Stock

18 Pieces Radiator Pressure Pump Cooling System Car Leak Detector Tester Tool Water Tank Adapter Car Coolant Vacuum Cleaner Head Gasket

  • ◇ Function --- This radiator pressure tester kit allows you to change coolant and test for leaks in your vehicle's cooling system, including the radiator, heater core and radiator cap, in a simple and straightforward manner..
  • ◇ Premium Quality --- Made of high quality and durable material, high strength and toughness, providing higher stability and longer service life..
  • ◇ Note ---If the temperature is too high, you may get scalded. Before you open it, make sure the tank is cool when you use it..
  • ◇ Easy to Use --- Remove the original radiator cap, select an available radiator cap from the test kit, and install it on the radiator port. Operate the hand pump until the pressure reaches 10-15psi (avoid reaching 35psi). Check the pressure gauge reading. If the reading drops automatically, the radiator may be leaking. Have the radiator system checked and repaired if necessary. Typically, it takes about 10 minutes to test for leaks and is a very quick and easy operation..
  • ◇ Packing list --- 1*pressure test pump with pressure gauge, 1* thermometer, 3*chrome-plated steel ....
Check Stock

FEXON Fan Clutch Nut Wrench Compatible with BMW E34 E46 E90 E39 E36 Clutch Removal Tool Kit Replaces 70074 Fan Clutch Wrench Set 32mm

  • Function: The hand pump leak detection tool pressurize on the reservoir, and watch for pointer drop over time to confirm system leak down. If there is any crack in the cooling system, the water in the tank will leak out under pressure, shows the fracture position, such as the tank, hose, a loose connection, etc. Check regularly, repair promptly, avoid leak result in the reduction of coolant and boiling point, cause high engine temperature, low oil viscosity and other serious problem.
  • Specification: The radiator pressure test tool uses aluminum pump cylinder rather than plastic one, 21.2" rubber nylon resin hoses, brass fittings, solid and durable. 3" large dial gauge with index range 0 to 35psi (0 to 2.5bar), easy to observe. Chrome plated brass quick coupler with relief valve, can be connected to radiator adapters easily and quickly..
  • Easy To Use: Remove the original radiator cap, choose an available radiator cap from the test kit and install it on radiator opening. Work the handpump till the pressure up to 10-15psi (Avoid up to 35psi). Check the gauge reading, if the reading drops automatically, it means that the leakage might occur in radiator. Please inspect the radiator system and repair it if necessary. Normally, it takes around 10mins to te....
Check Stock

8MILELAKE 18pcs Radiator Pump Pressure Tester and Vacuum Pump Type Cooling System Kit Coolant Pressure Tester Kit

  • This radiator pressure tester helps find internal and external leaks in your cooling system..
  • 8 radiator cap adapters included, and the test range is from 0 to 35 psi, ideal for domestic and import vehicles. With the special design of purge and refill tool connection, it fits nearly all type of radiator openings..
  • The Coolant Pressure Tester Kit Included a Pump with gauge For testing automotive pressurized cooling systems up to 35 PSI Has 8 radiator cap adapters for servicing most domestic and import vehicles..
  • Large volume pump capacity reduces strokes required to pressurize cooling systems Self-locking quick-disconnect components Thumb-operated relief valve for convenient pressure release..
  • Package includes: 17pc kit set and Carrying Case. This tool is made of high quality aluminum, rubber and plastic, high strength and good toughness.
Check Stock