Reviews High Precision Scope Rings

Tutengelctri 1 Scope Mount 2Pcs High Profile Scope Rings for 11mm Dovetail Rails

  • ▄︻┻┳═一 Double scope ring mount for 11mm dovetail mounts, specialized scope mount for .22/Airgun. Not for AR rifle..
  • ▄︻┻┳═一 Scope Rings Type: High Profile (0.8inch),Fit for a .22 rifle or an air rifle using a 3/8" or 11mm dovetail mount.
  • ▄︻┻┳═一 【High Quality Aluminum, Solid & Durable】Precision machining of aircraft grade 6061 aluminum alloy & high strength steel in....
  • ▄︻┻┳═一 With two rail clamp screws and four scope clamp screws, Precision and Repeatable Alignment. Scope rings are for standard....
  • ▄︻┻┳═一 Lifetime Warranty: 100% Satisfaction Guarantee.
Check Stock

Atom Optics 30mm Dovetail Scope Rings for 3/8\ or 11mm Dovetail Rails High Profile Scope Mounts 2PCS

  • 30mm scope rings 11mm Dovetail Rails 2pcs high profile，with allen wrench.
  • 3/8 Dovetail scope rings made of solid aluminum alloy with anodized black matte finish,precision machined.
  • Dovetail scope rings for 3/8" or 11 mm,the ring is for most scopes which are in 30mm scope tube.
  • 11mm Dovetail scope ring Base Designed with Locking Hex Screws to Tightly Fit on Mounts with 11mm Dovetail Dimension.
  • High profile scope rings (item height:2"),the height from the center of the scope tube to the picatinny base is 1.33 inches(34mm).
Check Stock

Monstrum Precision Picatinny Scope Rings with Integrated Level Bubble | 1 inch Diameter | Medium Profile

  • Monstrum Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld.
  • 1 inch diameter rings for mounting standard 1 inch rifle scope tubes.
  • Base is compatible with Picatinny mounting systems | Not compatible with Weaver mounts.
  • Scope rings come with an integrated level bubble mechanism for quickly checking if your rifle is lined up square with your target.
  • Available in three heights to match your needs: Medium Profile 1.00 inch, High Profile 1.20 inch, and Extra High 1.35 inch.
Check Stock

EZshoot Reflex Sight with 4 Reticles Red Dot Sight, Reflex Holographic Optic Scope with 20mm Rail Mount ，Absolute Co-Witness

  • ...& With Stop-Pin Design】 Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately. One of the high rings and one of the medium rings have a stop pin the bottom, Which prevents the ring from sliding once set..
  • ✌【High Quality Aluminum, Solid & Durable】Precision machining of aircraft grade 6061 aluminum alloy + high strength steel in black matte anodizing finish. Sturdy & lightweight construction, build no wobble, offer durable safe performance in the field..
  • ✌【Rail Clamp Screw Design & Easy To Install】With 2 rail clamp screws and 4 scope clamp screws per side, ensure mount any 1'' scope firmly, just twist on/off the rail clamp screw nut via allen wrench and mount the base on 11mm dovetail rail, simple and quick to remove or install. Comes with 2 pcs allen wrench..
Check Stock

UTG M1 Carbine Mount Complete with 1\ Rings , Black

  • ...e-Through Style, Provide Potential Visibility For Open Sights, Meanwhile Hollowed-Out Configuration Helps To Release Heavy Duty When Clamping Your Scope. Built-In Tape Inside Per Rings To Prevent From Marring The Scope, Also Prevent Sliding and Holding Postion Accurately..
  • Premium Aircraft Aluminum, Solid & Durable: Precision Machining of Aircraft Grade 6061 Aluminum Alloy + High Strength Steel In Black Matte Anodizing Finish, Sturdy & Lightweight Construction, High Quality, Sturdy Construction, Build No Wobble, Offer Durable Safe Performance In The Field..
  • Rail Clamp Screw Design & Easy To Install: With 1 Rail Clamp Screw and 2 Scope Clamp Screws Per Side, Ensure Mount Any 1'' Scope Firmly, Just Twist On/Off The Rail Clamp Screw Nut Via Allen Wrench and Mount The Base On 21mm Rail, Simple and Quick To Remove Or Install. Comes With 2 Pcs Allen Wrench..
Check Stock

BARSKA 4X20 Rimfire Riflescope

  • Precision Aiming: The 4x magnification scope features 1/4 MOA click adjustments for precision accuracy..
  • Quality Construction: The scope comes with coated optics, providing impressive viewing clarity. Tube diameter 3/4"..
  • 30/30 Reticle: The scope comes with 30/30 crosshair reticle for easy targeting, ideal for any type of shooting..
  • Parallax Free: The scope is parallax free at 50 yards, making it easy to target at closer range..
  • Accessories: The scope comes with set of 3/8" dovetail rings, lens cover, and lens cloth..
  • Included components: Mounting Rings, Lens Covers and Lens Cloth.
Check Stock

Feyachi RM26 Picatinny Riser Mount, 0.75 inch 5 Slots Riser Mount for Red Dot Sight

  • ...hrough style, provide potential visibility for open sights, meanwhile hollowed-out configuration helps to release heavy duty when clamping your scope. Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately..
  • ✌【High Quality Aluminum, Solid & Durable】Precision machining of aircraft grade 6061 aluminum alloy + high strength steel in black matte anodizing finish. Sturdy & lightweight construction, build no wobble, offer durable safe performance in the field..
  • ✌【Rail Clamp Screw Design & Easy To Install】With 1 rail clamp screw and 2 scope clamp screws per side, ensure mount any 1'' scope firmly, just twist on/off the rail clamp screw nut via allen wrench and mount the base on 21mm rail, simple and quick to remove or install. Comes with 2 pcs allen wrench..
Check Stock

PRI Polymer Ring Inserts - 30mm to 1 Inch. by Unknown

  • Monstrum Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld.
  • 30 mm diameter rings for mounting standard 30 mm rifle scope tubes30 mm diameter rings for mounting standard 30 mm rifle scope tubes.
  • Picatinny mount base mechanism comes equipped with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil | Not compatible with Weaver mounts.
  • Scope rings come with an integrated level bubble mechanism for quickly checking if your rifle is lined up square with your target.
  • Available in four different heights to match the needs of any shooter: 0.85 inch, 1.00 inch, 1.20 inch, and 1.35 inch.
Check Stock

CVLIFE 1’’ Dovetail Scope Rings for 3/8’’ or 11mm Dovetail Rails, High Profile Scope Mounts, 2Pieces

  • ✔Double dovetail rings for 3/8’’ or 11mm dovetail mount specialized scope mount for .22/Airgun..
  • ✔ The dovetail ring is for most scopes which are in 1''/ 25.4mm scope tube..
  • ✔ High profile, 20.4mm(0.8 in) from top of the dovetail rail to bottom of rings ( Item height: 1.9'')..
  • ✔ Built-In Tape Inside Per Rings To Prevent From Marring The Scope, Also Prevent Sliding and Holding Postion Accurately..
  • ✔ With two rail clamp screws and two scope clamp screws, Precision and Repeatable Alignment..
Check Stock

wipboten Optic Scope Rings Medium Profile Scope Mounts for Picatinny/Weaver Rail

  • Double scope ring mount for 11mm dovetail mounts..
  • One of the dovetail rings features a stop pin, for rock solid application..
  • High profile, 21mm(0.8 inch) from top of the dovetail rail to bottom of rings ( Item height: 1.9 inch)..
  • The scope ring is for most scopes which are in 1 inch/ 25.4mm scope tube..
  • With two rail clamp screws and four scope clamp screws, Precision and Repeatable Alignment..
Check Stock

Sig Sauer WHISKEY3 4-12X50mm Scope, 1', SFP - Black + Picatinny Scope Rings (BDC-1 Quadplex Reticle)

  • ...ellFire illumination available on select models. Low dispersion (LD) glass provides industry leading optical clarity for any situation. European style eyepiece for a smooth, fast, and precise reticle adjustment. Dependable waterproof (IPX-7 rated for complete immersion up to 1 meter) and fog-proof performance..
  • PRECISION Line up your shot at the exact height you want it with the Monstrum Tactical Precision Scope Rings! 1 inch in diameter, the rings are built for use with standard 1 inch scope tubes. The Picatinny base is compatible with all Picatinny mounting systems..
  • INCREASES STRENGTH It is not compatible with Weaver mounts. The torx locking screw system allows for quick yet powerful tightening while protecting the screws from stripping. These scope rings also features 2 square-integral recoil stops on each ring, which allows us to shave down the weight, while increasing the strength..
  • NO COMPROMISING Now you do not have to compromise when it comes to choosing either versatility or precision. The Monstrum Precision Rings allow you to properly align your scope to your rifle so you have one less thing to worry about..
Check Stock

Tydeux 1' and 30mm High Profile Quick Release Scope Mount Rings for Weaver and Picatinny Rail - Pack of 2

  • ...remove the internal rings in order to switch from 1" and 30mm diameter. Perfect for mounting most scopes which are in 1"/ 25.4mm scope tube.h from 1" and 30mm diameter. Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope..
  • 【HIGH QUALITY】Precision-machined with matte black anodized aluminum, sturdy and lightweight construction, high quality, sturdy construction, build no wobble, offer durable safe performance in the field..
  • 【EXCELLENT PERFORMANCE】The product is very light and easy to carry. Excellent materials, while maintaining strong and light weight, provide excellent waterproof performance.The product can still work normally in humid and harsh environment. But when not in use, please store it in a dry and cool place..
  • 【SUBTLE DESIGN】Built-in tape protection, built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding position accurately. With four screws design, it will hold the scope more securely..
  • 【EASY INSTALLATION】Ergonomic and quick detach fold-over clasp off to the side of scope rings help strengthen the stability and flexibility. Robust Hex screws with retention features and full length locking plate to guarantee ....
Check Stock

Monstrum Pro Series 7075 Aluminum Scope Rings | 30 mm | Medium Profile

  • Monstrum Pro Series scope rings are crafted from 7075 aerospace aluminum - providing greater tensile strength, shear strength, and Brinell hardness than typical 6061 aluminum scope rings.
  • Comes with stainless steel Torx mounting hardware, including a T25 Torx Plus wrench and a T25 Torx Plus Bit, for easy precision mounting without stripping of bolts.
  • Pro Series scope rings are treated with a Type III Hard Anodized Finish versus a Type II for previous generation scope rings for added protection against scratches and blemishing.
  • Available in 1 inch or 30 mm diameter. Compatible with both Picatinny or Weaver mounting bases..
  • All Monstrum products are now protected by Monstrum’s lifetime guarantee.
Check Stock