Reviews High Frequency Solenoid Valve

Co2 Regulator Solenoid Valve Replacement by Manatee- 110 Volts G1/4 Connection 0-8 Bar 5 Cycle/sec - for Hydroponic Grow Room Carbon Dioxide Regulators

  • ✔ HIGH QUALITY : MANATEE Co2 Regulator replacement solenoid valve. This is used for replacing the solenoid valve for a hydroponic co2 regulator..
  • ✔ DESIGNED FOR : indoor gardening, grow rooms and green houses to enhance carbon dioxide to the growing environment. will allow you to maintain....
  • ✔ INCREASE METABOLIC RATE : Speeding up growth rates and yields by up to 40%.
  • ✔ VOLTS : 110 Volts Standard U.S.A electric power / 4 Watts.
  • ✔ SPECIFICATIONS : 2 position / 2 posts valve type.
Check Stock

isinlive 8 Pack Humidifier Tank Cleaner for Water Treatment & 4 Pack Ultrasonic Demineralization Humidifier Replacement Cartridges Filters, Compatible with Most Humidifier and Fish Tanks…

  • Application model: the B2015-S85/ B2017-S85 solenoid valve is comparable to model 4040, compatible with Aprilaire models 220, 224, 400, 400A, 400M, 440, 500, 500A, 500M, 550, 550A, 558, 560, 560A, 600, 600A, 600M, 700, 700A, 700M, 760 and 768, doesn't work on models 330, 445, 110, 112, 350 and 360.
  • Function introduction: the humidifier solenoid valve controls how much moisture enters the humidifier, enabling it to maintain proper humidity levels throughout your home.
  • Humidifier valve features: applicable voltage is 24 volts, the power is 2.3 watts, frequency is 14 Hz, PSI is 125, 3/32 inch and 1/4 inch orifice threaded compression ends on both sides, inlet and outlet ports are reversible to fit a wider variety of humidifiers.
  • Easy to install: the installation of the solenoid valve is very simple, it can be done with a screwdriver and a wrench, and it can be installed in just a few minutes, please note that our products do not include the installation tool.
  • Durable material: the humidifier valve is made of durable brass material and copper wires, which is enough solid and durable, can be applied for a long time.
  • Note: please check the relevant size information carefully before purchasing.
Check Stock

Power Speed Steering Valve Related Solenoid A2214600184 Fit for Benz C‑Class (W204) 2008‑2014

  • ...ce the OEM number as a reference: A2214600184, which is made strictly according to the original materials and specifications, and is completely suitable..
  • ☀☀ Applicable to: Fit for Benz C-Class (W204) 2008-2014, direct replacement, (see detailed description below)..
  • ☀☀ Professional Manufacturing: The steering solenoid valve is professionally manufactured with high precision and high reliability. The solenoid valve is durable and stable in quality, and can be used with confidence..
  • ☀☀ Easy to Install: This speed sensing steering solenoid valve is easy to install, remove and replace the old valve. No need for complicated tools, professional manufacturing ensures that we can provide you with higher quality products, which you can buy easily..
  • ☀☀ Standard Specifications: It meets strict quality control standards and is reliable in use. Manufactured according to original specifications. Manufacture in strict accordance with factory quality control standards..
  • ☀☀ Professional Manufacturing: The steering solenoid valve is professionally manufactured with high precision and high reliability. The solenoid valve is durable and stabl....
Check Stock

TOMOON UHS24 Universal Humidifier Solenoid Valve 24 Volt, Exact for Aprila.ire 4040, 990-53, 32001639-002, A01-0814-148 and Many More,Compatible with HE220,HE225,HE260,HE265

  • Application model: the B2015-S85/ B2017-S85 solenoid valve is comparable to model 4040, compatible with Aprilaire models 220, 224, 400, 400A, 400M, 440, 500, 500A, 500M, 550, 550A, 558, 560, 560A, 600, 600A, 600M, 700, 700A, 700M, 760 and 768, doesn't work on models 330, 445, 110, 112, 350 and 360.
  • Function introduction: the humidifier solenoid valve controls how much moisture enters the humidifier, enabling it to maintain proper humidity levels throughout your home.
  • Humidifier valve features: applicable voltage is 24 volts, the power is 2.3 watts, frequency is 14 Hz, PSI is 125, 3/32 inch and 1/4 inch orifice threaded compression ends on both sides, inlet and outlet ports are reversible to fit a wider variety of humidifiers.
  • Easy to install: the installation of the solenoid valve is very simple, it can be done with a screwdriver and a wrench, and it can be installed in just a few minutes, please note that our products do not include the installation tool.
  • Durable material: the humidifier valve is made of durable brass material and copper wires, which is enough solid and durable, can be applied for a long time.
  • Note: please check the relevant size information carefully before purchasing.
Check Stock

Surwit 15810-RAA-A03 VTEC Solenoid Spool Valve Assembly with Oil Pressure Switch & Gasket Compatible with Honda Accord Element CR-V 2.4L Civic Acura RSX 2.0L Part# 15810-RAA-A01 15810-PPA-A01

  • The VTEC system provides the engine with valve timing optimized for both low and high RPM operations. The VTEC solenoid actually allows oil to flow to the internal galleries of the overhead camshaft. This means that the housing of the solenoid is holding back full engine oil pressure. A spool solenoid valve can direct the flow of hydraulic fluid. The valve is made up of spools that rotate or slide to block and open channels in a hydraulic system..
  • This VTEC Solenoid Spool Valve Fits for 2003 - 2011 Honda Element 2.4L, 2002 - 2009 Honda CR-V 2.4L, 2003 - 2007 Honda Accord 2.4L, 2002 - 2006 Acura RSX 2.0L, 2002 - 2005 Honda Civic 2.0L..
  • Customers can find the product you need accurately according to the OE number. OE part number: 917-224, 15810RAAA03, 15810RAAA02, 15810-RAA-A01, 15810PPAA01, 15810PNEG01, 15810-RAA-A03, 917224, 15810-PNE-G01, 15810-RAA-A02..
  • While a VTEC solenoid rarely goes bad, problems with VTEC not engaging properly are extremely common. Most of the time incorrect wiring is to blame, but occasionally something even smaller is the culprit. When a solenoid is bad, may mean the solenoid's plunger is either mechanically stuck in a closed position and therefore always making contact which may eventually cause the starter motor to burn its w....
Check Stock

ZRDR Co2 Generator System 2L with Pressure Gauge Automatic Pressure Relief Valve Bubble Counter for Aquarium Plants，Stable Output Sent Steel Bottle Base

  • ...apacity and Safe First - You could add more material: Citric acid 400g + baking soda 400 + water 600g. The capacity is twice that of an ordinary 2L bottle and half of 4L! An automatic pressure relief valve, when the pressure of the inside steel bottle exceeds 30KG will automatically release pressure. 12V Waterproof solenoid valve，Keep away from the danger of water leakage from the solenoid valve, protect your safety.
  • Refine The Bubbles - Our co2 aquarium kit is equipped with the atomizer, refine the bubbles and make them easy to dissolve in water and be absorbed by plants, keeping your aquarium full of vitality. When using this product for the first time, there will be large bubbles in the refiner, which will gradually disappear within 3 days.
  • Low Cost - You only need citric acid, baking soda, and water which are available in supermarkets. When the gas in the bottle runs out, you only need to purchase the material again.
  • Complete Accessories - steel bottle, Stainless steel pressure reducing valve, Filter, Bubble counter, Solenoid valve, Solenoid valve power supply, Solenoid valve connecting line, Spare sealing ring, Spare atomize piece, 4 snap suckers, Check valve, wrench, Stainless steel U-shaped tube, Stainless steel atomizer, base, air tube (1.5 m)....
Check Stock

ZRDR Co2 Generator System 2L with Pressure Gauge Automatic Pressure Relief Valve Bubble Counter for Aquarium Plants，Stable Output Sent Steel Bottle Base

  • ...eel, far better than a simple plastic bottle generator, more durable, stable, safe, and high pressure resistant.
  • [Safety First]Automatic pressure relief valve, when the pressure of the inside co2 steel bottle exceeds 30KG will automatically release pressure. 12V Waterproof solenoid valve，Keep away from the danger of water leakage from the solenoid valve, protect your safety.
  • [Refine The Bubbles]Our co2 aquarium kit is equipped with the atomizer, refine the bubbles and make them easy to dissolve in water and be absorbed by plants, keeping your aquarium full of vitality. When using this product for the first time, there will be large bubbles in the refiner, which will gradually disappear within 3 days.
  • [Low Cost]You only need citric acid, baking soda, and water which are available in supermarkets. When the gas in the bottle runs out, you only need to purchase the material again.
  • [Complete Accessories]Steel bottle, Stainless steel pressure reducing valve, Filter, Bubble counter, Solenoid valve, Solenoid valve power supply, Solenoid valve connecting line, Spare sealing ring, Spare at....
Check Stock

uxcell Pulse Solenoid Valve G1/2 DC3.6V Copper Male Thread Valves with Filter

  • This solenoid valve is basic automated components that electromagnetically control fluids..
  • Flow Direction: Unidirectional (Follow the Arrow on Valve Body).
  • Solenoid type magnetic field makes the valve reach higher pressure, which greatly improves the flow of the passed medium..
  • Replacement solenoid valve for induction fittings. Replace the bad work solenoid valve for machine..
Check Stock

DJ TRANS PARTS – 45RFE 545RFE 68RFE Solenoid Pack – Quality and Tested OEM product – Compatible with Dodge, Chrysler, & Jeep – Years 2004 and Up | Warranty Included with Purchase (RENEWED)

  • COMPATIBLE WITH – Here is a list of products that is compatible with this item. Feel free to google the part numbers as well to ensure it fits your vehicle. Compatible with Chrysler 300 2010-11 Valve Body Solenoid, Chrysler 300C 2010-11 Valve Body, Chrysler Aspen 2007-09 Valve Body Solenoid, Dodge Avenger 2010-11 Valve Body, Dodge Challenger 2010-11 Valve Body, Fit for Dodge Charger 2010-11 Valve Body Solenoid, Dodge Dakota 2004-11 Valve Body Solenoid, Dodge, Durango 2012 Valve Body Solenoid..
  • PRODUCT IS REMANUFACTURED OEM PART– All of DJ Trans Parts items are original OEM products. That being said, they are not brand new but refurbished. They are remanufactured and tested to ensure they work. This means you are getting the actual transmission, valve body, solenoid kit, etc. that your car needs. You can ensure our products will work with OEM parts..
  • PART NUMBERS - Here are the related part numbers of this item - 5RFE 545RFE 68RFE Transmission Solenoid Block Pack.
  • INSTALLATION VIDEOS ONLINE - Searching related installation video on the internet will be recommended. You can find these videos on Google and searching the part numbers online. We recommend to always wear eye protection and start with installation tools..
Check Stock

1/4inch DC 12V 2 Way Normally Closed Electric Solenoid Air Valve

  • .WIC Valve is compatible with SMC valves. Has two holes in the bottom and can be mounted in any position..
  • .2ACK Series valve is a Zero differential solenoid valve which can be operated at 0 PSI (Vacuum)..
  • .Comes with a ED 100% encapsulated coil which suitable to operate in continuous service and constant energized..
  • .This solenoid valve has one G1/4" inch DN8 inlet and one G1/4" inch DN8 outlet port. Valve stays close when the coil is de-energized- and it opens when energized..
  • .1/4inch DC 12V 2 Way Normally Closed Pneumatic Aluminum Electric Solenoid Air Valve WIC Valve 2ACK series 2-way normally closed solenoid valve is to control On/Off of air and inert gas..
Check Stock

A/C Compressor Control Solenoid Valve Replacement for 2013 2014 2015 2016 2017 Nissan ALTIMA 2.5 L SL SV

  • FITMENT - A/C control solenoid valve Replacement for 2013-2017 Nissan Altima.
  • A/C Compressor Control Valve made of high quality material, has experienced quality tested to ensure easy installation, optimal performance and durability enhancement..
  • Please verify the control valve on your factory compressor looks like the part pictured. Please note that these AC kits will only fit the vehicles original OEM AC compressors and will not fit an aftermarket compressors.
  • When the compressor solenoid valve doesn't blow cold. You should consider that whether there is a failure on your compressor solenoid valve. Replace the control valve on your with our replacement valve and your air conditioning will be good.
  • Service-If you have any problem or issues, please without any hesitation to contact our after-sale service via email, we will do our best to help you.
Check Stock

Appliancemate UHS24 Universal Humidifier Solenoid Valve Replacement 24Volt

  • PARTS NUMBER: UHS24 Universal Humidifier Solenoid Valve Replacement 24Volt.
  • Scope of Application: The UHS24 universal 24 volt solenoid valve can be applied for replacing Aprilaire 4040, General 990-53, Honeywell 320016939-002 and Carrier 4357, widely application, suitable for most type of humidifier.
  • Function: the humidifier solenoid valve can control how much moisture enters into your humidifier to make it possible to maintain proper humidity levels throughout your home.
  • PREMIUM QUALITY – The replacement part is made from durable high quality material and well-tested by the manufacturer.Non original aftermarket part. Fits OEM Standards!.
Check Stock

Electric Solenoid Air Valve G1/8 Vacuum Solenoid Valve Sealing Reduce Wear Resistamt Copper Coil for Industrial Use

  • COPPER FULL TURN COIL: Solenoid valve for a time use is not easy to hot, possess durable life, more durable than ordinary solenoid valve.
  • WEAR RESISTANT: Between solenoid valve internal moving parts has excellent softening oil, effectively reduce wear between parts.
  • RELIABLE SEALING: Solenoid valve using excellent sealing , to ensure that the product performance is stable and reliable, lasting.
  • WIDE APPLICATION: Used for rail transport, vehicle manufacturing, ship engineering, mechanochemistry, mining equipment, biomedicine.
  • AVIATION CAST ALUMINUM VALVE BODY: Die cast aluminum valve body with solid material, the is finely polished, the inner wall is also polished several times, to ensure that the interface is without burr and no air leakage.
Check Stock