Reviews High Frequency Preheater

Circuit Specialists | Deluxe PCB Preheater and Desoldering System with Hot Air Gun & Soldering Iron - Home & DIY Electronics - Solder Station Tool Kit

  • Introducing the CSI853B+ PCB preheater and hot air rework station, your ultimate solution to soldering and de-soldering surface mount integrated circuits..
  • Featuring a 1000 watt heater, the CSI853B+ integrates a PCB preheating platform with a hot air re-work and soldering system..
  • This easy-to-operate system is powered by 110 VAC +/- 10% and has a maximum power of 1000 watts (preheater and hot air combined)..
  • With a temperature range of 50-400 deg C (122 to 752 deg F) for the preheater and 100-480 deg C for the hot air, the CSI853B+ is designed for stable and consistent working output..
  • The hot air wand, with 720 watts of power and a maximum flow of 120L/minute, can be hand-held or mounted into the moveable stand for freehand work..
Check Stock

YIHUA 1000B- 4 in 1 Station - IR Infrared BGA, Preheater, Soldering Station and Hot Air Rework Station, plus a Temp Sensor, ºC/°F display, PCBs Holder, LED Lamp and more.

  • Introducing the Yihua 1000B Station: It gives you all: Infrared System & Temp Sensor, a bottom Preheater, Hot Air Rework Station and Soldering Station at their best. At a refreshing price, it offers different ways to get different projects done when its designs & functions are making the difference. So you can Solder, Rework, Modify, Create and Do better with Yihua 1000B..
  • Infrared Station & Temp Sensor: What happened when we give the infrared system a sensor? The combination brings the heat under ultimate control. When Infrared System responds fast with its power to provide efficient focused heating, the senor monitors the heat supplied to the parts and makes sure the delicate components can stay away from extreme heat damage..
  • Capability & Performance: Preheater with high-quality ceramic plate to provide even heating & high stability.
  • Soldering Station & Hot Air Rework Station with premium-quality ceramic heating element to provide efficient & stable heating.
  • Advanced Features: Intelligent Heat Control.
  • Interior processed with SMT Dual Board Technique (enhanced safety and stability).
  • Exclusive Hot Air Gun Fail-Safe Protection.
  • Power-conserving LED lamp to brighten the details.
  • Dual-Axle design to provide flexible support of P....
Check Stock

3/4\ x 36\

  • Manufactured from highly flexible aluminum.
  • Contains no paper. Corrosion and flame resistant to 450&DEG.
Check Stock

VEVOR Preheating Oven T8280 1600W Infrared Preheating Station Hot Plate PCB Preheater 280x270MM

  • Preheating Station Work Bench Size :410x316mm.
  • Complete Preheating Oven Machine Power :1600W.
  • PCB Preheater Heating plate temperature can be adjusted: 0-450 degree.
  • Preheating Oven T-8280 Can Achieve To Heat PCB Board And Component Which Contains Lead Or Not，Especially For The BGA And SMD Parts.
  • Preheating Station Use Infrared Heat, Easy To Cut Through, Heat Proportion, Don’T Have Sirocco Flow. Don’T Shift The Small Components On The PCB Board，Ensure The Welding Quality.
Check Stock

High Frequency Machine MQ Portable Handheld High Frequency Facial Wand

  • PACKAGE INCLUDE: The portable high frequency machine includes an insulated handle, English manual, 4Pcs electrodes attachments (tongue tube, bend....
  • USE FREQUENCY: It is recommended to use it 2-3 times a week to avoid prolonged use in the same area..
  • INSTRUCTIONS: Just insert the desired glass electrode into the high frequency wand, gently push in the electrode and it should just snap into place.....
  • FOUR METHODS: High frequency facial beauty machine methods can be chosen which are indirect high frequency, direct high frequency..
  • AFTER SALES SERVICE: If you are not completely satisfied with the MQ's high frequency facial machine, we will full refund without any questions, and....
Check Stock

High Frequency Facial Wand MQ Portable Handheld High Frequency Machine

  • PACKAGE INCLUDE: The portable high frequency machine includes an insulated handle, English manual, 4Pcs electrode attachments (tongue tube, bend tube,....
  • INSTRUCTIONS: Just insert the desired glass electrode into the high frequency wand, gently push in the electrode and it should just snap into place.....
  • EFFICIENT: You can choose the different electrodes to your skin, mushroom tube for broad area.
  • FOUR METHODS: High frequency facial beauty machine methods can be chosen which are indirect high frequency, direct high frequency..
  • AFTER SALES SERVICE: If you are not completely satisfied with the MQ's high frequency facial machin, our friendly customer service team 24 hours are....
Check Stock

XCFDP 15MHz DDS Signal Generator Counter,High Precision Dual-Channel Function Generator Arbitrary Waveform Frequency Meter 2.4’’ Screen 200MSa/s 15MHz

  • 【EASY TO OPERATE】Convenient operation interface, superior technical indicators and humanized graphic style. Its sine wave frequency output can....
  • 【SIGNAL STABILITY】The signal generator adopts large-scale FPGA integrated circuit and high-speed MCU processor, and the internal circuit adopts....
  • 【FREQUENCY METER FUNCTION】It supports scanning output from low frequency to high frequency or from high frequency to low frequency. The scanning....
  • 【HIGH PRECISION】This signal generator adopts dual-channel DDS signal and TTL electric level output to generate accurate, stable, low-distortion....
  • 【WIDE APPLICATION】The signal generator has excellent amplitude-frequency characteristics, small and beautiful appearance, and intuitive control....
Check Stock

High Frequency Facial Wand - TUMAKOU Portable Handheld Blue High Frequency Facial Machine - 4 Different Blue Glass Tubes for Skin

  • 【Latest Upgraded Blue High Frequency Technology】TUMAKOU blue high frequency technology combines ORANGE and VIOLET effects into a universal tube,Then add TUMAKOU high frequency safe and 100% natural way technology to bring you the best results over time..
  • 【Enjoy Using 4 Blue Glass Tubes for Different Uses】This TUMAKOU high frequency facial wand comes with 4 different blue glass tubes to meet all your needs(1*Mushroom Tube, 1*Tube, 1*Bend Tube and 1*Tongue Tube), and let you focus on all the different areas. Mushroom tube is suitable for broader areas, the Tube is used for hair, Tongue tube is suitable for area around the eye, and Bend Tube is suitable for area around the nasal fossa..
  • 【Adjustable Level & Easy To Use】The energy level of our portable high frequency facial machine is adjustable,the higher level will bring you better results! But before using it for the first time, we recommended to test the strength by hand, and then use it where you want to use it. When you using, just insert the glass tube into the wand, push it in gently, then turn the high frequency face machine down to zero and turn it on, choose different levels to use accordi....
Check Stock

(2) JBL JRX225 Dual 15\ Professional 4000w Passive DJ/PA Speakers 4 Ohm JRX 225

  • Features: JBI JRX225 Dual 15" 2000 Watt Passive DJ/PA Speaker. Dual JBI low frequency drivers with a 64 mm (2.5 in) diameter edgewound ribbon voice coil for greater efficiency and power handling. JBI 2414H-C 25 mm (1 in) polymer diaphragm compression driver.
  • Advanced network topology crossover design. High-voltage capacitors and inductors with massive cores and heavy gauge wire. Progressive Transition high frequency waveguide. 19 mm (.75 in) MDF (Medium Density Fiberboard) enclosure.
  • SonicGuard protects the high frequency driver from excess power without interrupting the performance. Non-resonant, all-steel handles. 18-gauge hexagon perforated, steel grille Dual-angle pole-mount socket allows the speaker to tilt 10. Details: Power Rating : 500 W / 2000 W.
  • Frequency Range (-10 dB) : 42 Hz - 18 kHz. Frequency Response (3 dB) : 62 Hz - 13 kHz. Sensitivity (1w/1m) : 100 dB SPL. Nominal Impedance : 4 ohms. Recommended Amplifier Power : 500 W to 1000 W into 4 ohms. Maximum SPL : 133 dB. Nominal Dispersion : 90 x 50. Crossover Frequency : 2.2 kHz.
  • Dimensions (H x W x D) : 1092 mm x 464 mm x 432 mm (43 in x 18.3 in x 17 in). Weight : 42.6 kg (94 lb). High Frequency Driver : JBI 2414H-C , 1" exit compression driver mounted on Progressive Transition Waveguide. Low....
Check Stock

Professional Skin Therapy Wand 100240V High Cycle Beauty Therapy Upgraded Version Women High Frequency Facial Machine Home Use US Plug

  • ANALGESIC PROPERTIES: It helps calm and has analgesic properties. Produce ozone , help wound healing, inhibit pores..
  • EASILY USE: Select the required glass tube, insert the required glass tube into the HF machine, and gently push it into place. Please adjust the volume to beginning level before use..
  • DIFFERENT FREQUENCY: You can choose indirect high frequency or direct high frequency based on your specific needs. Use it 2 to 3 times a week..
  • HIGH FREQUENCY TECHNOLOGY: High frequency face stick is a new high frequency technology. It is a safe, meet your various needs and is very effective..
  • BALANCES PH: Relieves discomfort and balances PH. Accelerate blood circulation, promote metabolism. It has the effect of firming skin..
Check Stock

(2) JBL Pro JRX212 12\ 2000w Professional Passive PA/DJ Speakers 8 Ohm JRX 212

  • Features: JBI Pro JRX212 12" 1000 Watt 8 Ohm Passive PA/DJ Speaker. JBI 12 in low frequency driver with a 64 mm (2.5 in) diameter edge wound ribbon voice coil. JBI 2414H-C 25 mm (1 in) polymer diaphragm compression driver. Advanced network topology crossover design.
  • High-voltage capacitors and inductors with massive cores and heavy gauge wire. Progressive Transition high frequency waveguide. 19 mm (.75 in) MDF (Medium Density Fiberboard) enclosure. SonicGuard protects the high frequency driver from excess power without interrupting the performance..
  • Non-resonant, all-steel handles. 18-gauge hexagon perforated, steel grille Dual-angle pole-mount socket allows the speaker to tilt 10. Specifications: Power Rating : 250 W / 1000 W. Frequency Range (-10 dB) : 60 Hz - 20 kHz. Frequency Response (3 dB) : 80 Hz - 18 kHz.
  • Sensitivity (@1m) : 98 dB SPL (1w/1m). Nominal Impedance : 8 ohms. Recommended Amplifier Power : 250 W to 500 W into 8 ohms. Maximum SPL : 128 dB. Nominal Dispersion : 90 x 50. Crossover Frequency : 2.1 kHz. Dimensions (H x W x D) : 584 mm x 399 mm x 325 mm (23 in x 15.7 in x 12.8 in).
  • Weight : 19.5 kg (43 lb). High Frequency Driver : JBI 2414H-C 1" exit compression driver mounted on Progressive Transition Waveguide. Low Frequency Driver : JBI M....
Check Stock

KZ EDA Dynamic Driver Earbuds Combos,3 in 1 in Ear Monitor Wired Phone Earphones Headphones, HiFi Music IEM Headsets with Removable Cord Without Mic

  • THREE PAIRS OF EARBUDS – KZ EDA dynamic driver earphones combos set is tuned by KZ accoustic team many times for the outstanding sound quality. The price of one set of KZ EDA in ear headphones is equal to three pairs of earphones and three music styles to meet your listening needs. The low-frequency dynamic performance is excellent, the mid-high frequency is upgraded, and the three-frequency connection is smooth..
  • THE GOLD EARBUDS WITH EXTRA BASSY SOUND – Focus on optimizing the mid-lows, making the bass strong and elastic. Deep dive, strong and powerful drum beats, excellent low frequency transient performance, suitable for DJ and songs with heavy metal rhythm. The magnetic gap of 0.15MM brings stronger output performance, lower distortion rate, and more realistic restoration of sound..
  • THE SILVER EARBUDS WITH BALANCED SOUND – Referring to the Harman curve, the three-frequency is balanced and powerful, the vocals are clear and sweet, the low-frequency dives and the high-frequency is transparent, and the sound texture is strong, suitable for pop music and other genres. Customized 0.035MM diameter high tension voice coil wire makes the vibration frequency more stable and efficient..
  • TRANSLUCENT CYAN WITH HIGH-RESOLUTION SOUND – On the basis of ex....
Check Stock

HiFiGo LETSHUOER x GIZAUDIO Galileo Dual-Driver Hybrid in-Ear Monitor, 10mm Dynamic Driver + Balanced Armature Unit IEMs in-Ear Earphones (4.4mm Plug)

  • Precise & Reliable 3D Printed Acoustic Cavity Structure: The acoustic cavity structure of Galileo earphones is designed with high-precision 3D printing technology. The complex acoustic cavity is molded with resin materials simultaneously to achieve more accurate physical frequency division..
  • Synthetic resin panel from the starry sky: Galileo uses an ink-painted synthetic resin panel, with azure blue, dark brown, and silver-white complementing each other as if the Milky Way and stars are fixed in it. With the surface treatment of actinic resin, each earphone has a unique brilliance flow, which is as eye-catching as the twinkling stars..
  • 10mm liquid silicone & Al-Mg Alloy Dynamic Driver + Sonion 2389 balanced armature + electronic independent dual-frequency crossover: In order to meet the pursuit of excellent sound performance, Galileo houses a 10mm liquid silicone + Al-Mg alloy dynamic driver unit and a Danish Sonion 2389 balanced armature driver unit as the core configuration. The pair is designed with an independent electronic frequency division and cavity for each driver unit. The tube ensures a precise sound phase and extremely low distortion in the outpu....
Check Stock