Reviews Hidden Fastener Driver Bit

3/8' Black Oxide Twist drill Bit Kobalt Box of 25 Bits

  • 2-in-1 SpeedFit connector accepts all hex shank accessories plus 1" screw driver bits.
  • Titanium coating increases drilling speeds and extends drill bit life.
  • Precision and 135° split point penetrates on contact preventing drill bit "walking".
  • Compact screw guide prevents fastener wobble or disengaging from the bit while driving screws.
  • ¼" SpeedFit hex shank stops drill chuck spin-out.
Check Stock

ABN Impact Nut Driver Tool Set - 6pc SAE 6 IN Long Shank Nut Driver Bits Magnetic Tip Sockets, 1/4 IN Hex Shank

  • IMPACT DRIVER SET: Use the ABN SAE Magnetic Nut Driver Bits Impact Drill Sockets Set to tighten and remove nuts and bolts when working in your home, on your vehicle, or on metal or woodworking projects.
  • EXTEND YOUR REACH: 6-inch (15.2cm) long reach to access narrow spaces and hard-to-reach areas.
  • 1.25 inch (3.1cm) long hex shanks feature 1/4 inch (6.35mm) diameter.
  • NEVER DROP A FASTENER AGAIN: Impact nut driver magnetic impact driver sockets set have powerful magnets to provide superior retention on screws, nuts, and bolts while operating.
  • BUILT TO LAST: Prevent rounding off fasteners with the recessed 6 point nut drivers for impact drills.
  • Chrome-vanadium steel and black phosphate coating provides maximum strength and rust resistance.
  • PACKAGE CONTENTS: Impact driver socket adapter set includes 6 SAE impact drivers (1/4, 5/16, 3/8, 7/16, 1/2, and 9/16 inch) and 1 bit driver holder.
  • Each magnetic extended nut driver bit nutsetter tool is permanently laser-etched sizing makes identification easy.
Check Stock

BOSCH PS21N 12V Max Two-Speed Pocket Driver (Bare Tool)

  • Effective pocket driver design – has pro power in a two-speed pocket driver at only 1.4 Lbs. (tool only, not including battery).
  • Professional motor – delivers 265 In.-Lbs. of torque and a max speed of 1,300 rpm for real performance.
  • Compact housing – features a head length of only 5.6 In. and a weight of only 1.4 Lbs. (tool only, not including battery).
  • Two-speed transmission – provides a high-power setting at 0-350 rpm and a high-speed setting at 1,300 rpm.
  • Precision 20+1 clutch settings – allows for accurate torque settings for less fastener damage.1/4 In. hex quick-change chuck – provides enhanced bit grip and fast bit changes.
Check Stock

Myard Universal Hidden Deck Fastener Clips for Grooved Edges of Composite Decking Boards to Joists, 1/4' Gap Spacing, with Square Driver Bit (50-Pack)

  • ▼ Compatible with AZEK, Cali-Bamboo, Deckorators, DuraLife, Envision, EverNew, Fiberon, MoistureShield, Lumberock, TimberTech, Trex, WearDeck, Zuri branded edge-grooved composite, hardwoods, treated lumber, cedar, & vinyl deck boards..
  • ▼ INSTALLATION: (1) Insert a Myard hidden fastener clip into the grooved edges of decking over a joist. (2) Drive the screw ONLY halfway (Fully tighten later once all boards are in place). The wings must remain level with the joist for the next board to fit correctly. (3) Continue to add clips on each joist against deck boards..
  • ▼ INSTALLATION: (4) Install “next” boards, make sure boards are pressed firmly against the clips and secured under the wings. (5) Do NOT over-tighten the screws. Please set proper driver torquing (2 to 6 drill power). The screw head will be resting on the top of the clip, but not sinking into the clip..
Check Stock

Myard Universal Hidden Deck Fastener Clips for Grooved Edges of Composite Decking Boards to Joists, 1/4' Gap Spacing, with Square Driver Bit (100-Pack)

  • ▼ Compatible with AZEK, Cali-Bamboo, Deckorators, DuraLife, Envision, EverNew, Fiberon, MoistureShield, Lumberock, TimberTech, Trex, WearDeck, Zuri branded edge-grooved composite, hardwoods, treated lumber, cedar, & vinyl deck boards..
  • ▼ INSTALLATION: (1) Insert a Myard hidden fastener clip into the grooved edges of decking over a joist. (2) Drive the screw ONLY halfway (Fully tighten later once all boards are in place). The wings must remain level with the joist for the next board to fit correctly. (3) Continue to add clips on each joist against deck boards..
  • ▼ INSTALLATION: (4) Install “next” boards, make sure boards are pressed firmly against the clips and secured under the wings. (5) Do NOT over-tighten the screws. Please set proper driver torquing (2 to 6 drill power). The screw head will be resting on the top of the clip, but not sinking into the clip..
Check Stock

RYOBI PCK700KN ONE+ 18V Cordless 9-Tool Combo Kit with 3 Batteries and 6-Port Supercharger

  • Drill/Driver: 1/2 in. keyless chuck with a 24-Position clutch that adjusts torque output to control the depth of a screw or fastener.
  • Drill/Driver: 2-Speed gear box offers a low speed (0 - 450 RPM) for high torque applications and a high speed (0 - 1,750 RPM) for fast applications with 500 in./lbs. of torque to handle all your drilling and driving needs.
  • Impact Driver: 1/4 in. quick-connect collet provides quick and easy bit changes.
Check Stock

Stanley Proto J7099A 13 Piece 3/8' Drive Hand Impact Driver Set

  • Set Includes: Driver, 10 Bits, 2 Bit Holders and Case.
  • Designed to loosen hard to turn bolts and nuts.
  • Hand impact driver has heavy-duty spring for added torque.
  • The TorquePlus design allows for quick and easy socket engagement to the fastener flats, not the corners.
  • Popular interchangeable bits are packaged in plastic blowmolded box for easy storage, Made in USA.
Check Stock

Simpson EB332WD316R275 EB-TY® EB332W Premium Hidden Deck Fastener™ w/ 2-1/4 in. Type 316 Screws (275-Qty)

  • Patented EB-GUIDE predrill guide provides precise fastener angle alignment for consistent biscuit installations. Stainless-steel reinforced biscuit provides strength and increased pullover resistance.
  • Underside keel provides consistent fastener positioning. Radius sides and chamfered edges provide easier alignment and faster installation.
  • Type 316 stainless-steel trim-head, 6-lobe screws with black-painted heads provide a concealed finish and blend in with EB-TY biscuit. Decking thickness: 3/4 in..
  • Spacing requirement: 3/32 in. Use for 3/4-in. or greater wood with moisture content greater than air dry (approx. 19%).
  • Includes: EB-TY Premium biscuits, stainless-steel screws, Ipê plugs for first and last board installations, EB-GUIDE predrilling tool, 1/8 in. quick-release impact-ready drill bit, T-15 6-lobe driver bit for reduced cam outs. Quantity: 275.
Check Stock

Bosch GSR12V-300N 12V Max EC Brushless 3/8 In. Drill/Driver (Bare Tool)

  • Efficient drill/driver design provides Pro torque in a 3/8 in. Drill/driver At only 1. 6 lbs. (Tool only, not including battery).
  • Eco Brushless motor delivers 300 in. -Lbs. Of torque and a max speed of 1, 750 RPM for outstanding performance.
  • Compact housing features a head length of only 6. 0 in. And a weight of only 1. 6 lbs. (Tool only, not including battery).
  • Two-speed transmission provides a high-power setting at 0-460 RPM and a high-speed setting at 1, 750 RPM.
  • Precision 20+1 clutch settings allows for accurate torque settings for less fastener damage.
  • Included Components: (1) Gsr12V-300 12V Max Ec Brushless 3/8 In. Drill/Driver.
Check Stock

Plastic Deck Clips Pack of 30 | Universal Plastic Decking Fasteners & Metal Deck Screws | Deck Clips for Composite Decking Boards | Plastic T Clips for Decking | Universal Deck Fastener Clips System

  • WHAT’S INCLUDED- Each order includes 30 plastic deck T clips, 30 stainless steel deck screws, 1 square install bit, as well as detailed installation instructions..
  • EASILY INSTALLED - These fastening porch deck clips allow for the installation to be done above the wood decking framework and installs in a variety of grooved composite deck boards. Instructions for installing these hidden fastener clips are included..
  • PROFESSIONAL RESULTS- These plastic deck t clips help achieve a seamless, fastener-free composite decking making them the best universal decking fasteners available. The stainless steel deck screw are set in the fastener for easier installation..
  • CONTRACTOR, COMMERCIAL & LARGE PROJECTS WELCOMED- We always offer discounts when purchasing 5 or more of any of our products..
Check Stock

Channellock 39067 132 Piece Tool Set

  • 3/8" drive, 72 gear teeth quick release ratchets.
  • Flat panel, full polish SAE & Metric combination wrenches.
  • 3/8” & 1/4" drive, chrome vanadium standard & deep sockets.
  • Magnetic bit driver with full range of fastener bits.
Check Stock

NATIONAL NAIL 345001 Marksman Pro Tool

  • Tool used in conjunction with screws and bit.
  • Provides a low cost, fastener free deck surface.
Check Stock

NEIKO 10083A Master Torx Bit Socket and External Torx Socket Set, S2 and CrV Steel, Supreme Torque Output Complete Kit, 60 Pieces

  • TORX BIT SET: This 60-piece Master Torx Bit Socket and External Torx Socket Set is everything you need for Torx projects. Each bit included in this master set is made of premium S2 alloy steel for superior hardness and durable longevity..
  • TORQUE POWER: This torque socket set is created with strong chrome vanadium steel that provides superior torque for greater turning power with any driver tools. These sockets feature a mirrored chrome finish for an incredible look and feel..
  • SMOOTH TOOL PRECISION: Our Torx bits each have a precision-machined tip to ensure accurate size and fit. An attached chamfered bit helps insert the piece smoothly into fasteners and protects both the bit and fastener from damage and stripping..
  • SIZES: This master Torx set has 17 pieces of Torx star-bit sockets from T6 to T70, 17 pieces of tamperproof Torx bit sockets from TT6 to TT70, 12 pieces of Torx-plus bit sockets from TP8 to TP60, and 14 pieces of external Torx sockets from E4 to E24..
  • ALL-IN-ONE SET: This master kit includes Torx bit sockets and e-Torx sockets arranged in a high-impact plastic case. Each bit has a specific size slot for easy organization, portability, and security in your home, garage, or workshop..
Check Stock