Reviews Hidden Deck Screw Gun Driver
Fastenmaster Cortex for Decks Hidden Fasteners - Trex Transcend Tiki Torch 100 Lin.ft
- Kit includes 175 BLACK hidden deck clips, 190 #8x2” black T15 stainless steel screws,driver and drill bits plus gap spacer tools.
- 175 count kits will fasten 100 Sq. Ft. of decking (16" on Center).
- Use with pre-grooved 5/4 or 1x hardwoods, composites and PVC material.
- Stainless Steel Insert molded inside the deck fastener prevents overdriving of the Screw during installation.
- Spacer leg automatically sets the gap between boards for consistent spacing.
Check StockMyard Universal Hidden Deck Fastener Clips for Grooved Edges of Composite Decking Boards to Joists, 1/4' Gap Spacing, with Square Driver Bit (50-Pack)
- ...“C” opening must be 0.15″ or bigger..
- ▼ Compatible with AZEK, Cali-Bamboo, Deckorators, DuraLife, Envision, EverNew, Fiberon, MoistureShield, Lumberock, TimberTech, Trex, WearDeck, Zuri branded edge-grooved composite, hardwoods, treated lumber, cedar, & vinyl deck boards..
- ▼ INSTALLATION: (1) Insert a Myard hidden fastener clip into the grooved edges of decking over a joist. (2) Drive the screw ONLY halfway (Fully tighten later once all boards are in place). The wings must remain level with the joist for the next board to fit correctly. (3) Continue to add clips on each joist against deck boards..
- ▼ INSTALLATION: (4) Install “next” boards, make sure boards are pressed firmly against the clips and secured under the wings. (5) Do NOT over-tighten the screws. Please set proper driver torquing (2 to 6 drill power). The screw head will be resting on the top of the clip, but not sinking into the clip..
Check StockMyard Universal Hidden Deck Fastener Clips for Grooved Edges of Composite Decking Boards to Joists, 1/4' Gap Spacing, with Square Driver Bit (100-Pack)
- ...“C” opening must be 0.15″ or bigger..
- ▼ Compatible with AZEK, Cali-Bamboo, Deckorators, DuraLife, Envision, EverNew, Fiberon, MoistureShield, Lumberock, TimberTech, Trex, WearDeck, Zuri branded edge-grooved composite, hardwoods, treated lumber, cedar, & vinyl deck boards..
- ▼ INSTALLATION: (1) Insert a Myard hidden fastener clip into the grooved edges of decking over a joist. (2) Drive the screw ONLY halfway (Fully tighten later once all boards are in place). The wings must remain level with the joist for the next board to fit correctly. (3) Continue to add clips on each joist against deck boards..
- ▼ INSTALLATION: (4) Install “next” boards, make sure boards are pressed firmly against the clips and secured under the wings. (5) Do NOT over-tighten the screws. Please set proper driver torquing (2 to 6 drill power). The screw head will be resting on the top of the clip, but not sinking into the clip..
Check StockDEWALT Drywall Screw Gun, 6.2-Amp (DW257)
- Drywall screw gun has helical-cut steel and heat-treated gears for long life and durability.
- DEWALT drywall screw gun has a high torque for deck building, drywall and heavy gauge steel stud framing.
- The drywall gun has a depth-sensitive, "set and forget" nosepiece for consistent fastener depth.
- Two-finger trigger for increased comfort and ease of use.
- Helical-cut steel, heat-treated steel gears for long life and durability.
- High torque for deck building and for drywall and heavy-gauge steel stud framing.
- Depth-sensitive, set and forget nose piece for consistent fastener depth.
- Two-finger rubber trigger for increased comfort.
Check StockDeckWise (Black) Ipe Clip EXTREMEKD Hidden Deck Fasteners, 1/4' Spacing, Stainless Steel Black #8x2' Trim-Head Screws for 600 Sq. Ft. of KD Hardwood, Thermal or Composite Decks (1050 Bucket)
- Kit includes 1050 BLACK hidden deck clips, 1140 #8×2” black T15 stainless steel screws, driver and drill bits plus gap spacer tools.
- 1050 count kits will fasten 600 Sq. Ft. of decking (16″ on Center).
- Use with pre-grooved 5/4 or 1x hardwoods, composites and PVC material.
- Stainless Steel Insert molded inside the deck fastener prevents overdriving of the Screw during installation.
- Spacer leg automatically sets the gap between boards for consistent spacing.
Check StockDeckWise (Brown) Ipe Clip Extreme Hidden Deck Fasteners, 3/32' Spacing, Includes Stainless Steel Black #8x2' Trim-Head Screws for 600 Sq. Ft. of AD Hardwood or Thermal Wood Decks (1050 Bucket)
- Kit includes 1050 BROWN hidden deck clips, 1140 #8×2” black T15 stainless steel screws, driver and drill bits plus gap spacer tools.
- 1050 count kits will fasten 600 Sq. Ft. of decking (16″ on Center).
- Use with pre-grooved 5/4 or 1x hardwoods, composites and PVC material.
- Stainless Steel Insert molded inside the deck fastener prevents overdriving of the Screw during installation.
- Spacer leg automatically sets the gap between boards for consistent spacing.
Check StockDeckWise (Brown) Ipe Clip Extreme Hidden Deck Fasteners, 3/32\ Spacing, Includes Stainless Steel Black #8x2\ Trim-Head Screws for 300 Sq. Ft. of AD Hardwood or Thermal Wood Decks (525 Bucket)
- Kit includes 525 BROWN hidden deck clips, 570 #8x2” black T15 stainless steel screws, driver and drill bits plus gap spacer tools.
- 525 count kits will fasten 300 Sq. Ft. of decking (16" on Center).
- Use with pre-grooved 5/4 or 1x hardwoods, composites and PVC material.
- Stainless Steel Insert molded inside the deck fastener prevents overdriving of the Screw during installation.
- Spacer leg automatically sets the gap between boards for consistent spacing.
Check StockDEWALT Drywall Screw Gun, Variable Speed Reversible, 6.5-Amp (DW276)
- Drywall screw gun has helical-cut steel and heat-treated gears for long life and durability.
- DEWALT drywall screw gun has a high torque for deck building, drywall and heavy gauge steel stud framing.
- The drywall gun has metal gear housing for jobsite durability and increased reliability.
- Depth-sensitive, "set and forget" nosepiece for consistent fastener depth.
- Two-finger trigger for increased comfort and ease of use.
- Excellent ergonomics offers less user fatigue.
Check StockReal Avid Precision Screwdriver Set for Gunsmithing | 90 PCS Screw Driversets with LED Driver Hex Phillips & Torx Bit Set | Tool Kit Includes Magnetic Bit Driver Turret Tool Multibit Set & Case
- UNIVERSAL SCREWDRIVER BIT SET: Comes with 87 labeled S2 Steel bits, including flat head screwdriver bit set, torx bit set, phillips screwdriver set &....
- GUNSMITHING TOOL KIT: Essential gun repair tool kit with long bit driver, small bit driver, complete bit set, scope turret adjustment tool & storage....
- FOR STUCK SCREWS: Small bit driver doubles as a screwdriver and can be used as an auxiliary handle to loosen stuck screws, precisely tighten screws or....
- LED SCREWDRIVER BIT DRIVER: Comfortable, long screwdriver illuminated by bright light to easily work on dark, hard-to-reach screws..
- HOLLOW GROUND SCREWDRIVER SET: A must-have for gun repair. Hollow ground bits are gun smithing essential tools, they match & fill gun screw slots,....
Check StockScrewdriver Diversion Safe Hidden Stash Storage Container
- HIDE YOUR VALUABLES in plain sight with this popular stash can. Having a screw driver around is very discrete. Nobody would suspect that your....
- AUTHENTIC - Made from a real screw driver. You could easily place this among a dozen others and there would be no difference..
- HIDDEN COMPARTMENT is accessed by unscrewing the bottom lid which has the tab still intact..
Check StockQuick Screw Gutter Hangers 5 Inch- 50 Pack - 5 Inch Gutter Clips with Bonus 6 Inch Drill Bit - Hidden Bracket Clips with Pre-Assembled Screw - Fix Sagging Rain Gutters
- 5" QUICK SCREW GUTTER HANGER - These hidden hangers for gutters are designed to increase tension on new and existing gutters. Quick screw bracket comes pre-assembled with a large #12 screw with Type 17 point thread. Fits all 5-inch aluminum (non-plastic) gutters..
- FIX SAGGING GUTTERS & LOW SPOTS - Use our 5 inch gutter clips to repair low spots and un-sag long stretches of gutter. Solve the problem of streams of water getting backed up and pouring over the gutter's edge. Reinforce existing gutters to withstand heavy snow..
- HEAVY DUTY, LOW PROFILE DESIGN - The gutter hangers are engineered with a screw retention dimple that facilitates positive thread engagement, less slipping, firm seating of the screw, no over-torque, and no stripping of the screw head. Remains hidden below the lip..
- EASY INSTALLATION W/ NUT DRIVER - Install the 5 inch gutter brackets using a 1/4" nut driver and cordless drill. Split-less clip means no snagging and faster installation into the rafter end. Total penetration depth is 1-3/8". Ideal for straight or angled fascia boards..
- INCLUDES BONUS 6" YONICO DRILL BIT - Includes a bonus 6" YONICO drill bit for additional clearance and easier installation. YONICO is the same trusted brand carried by big box stores across the country. The....
Check StockQuick Screw 6 Inch Gutter Hangers - 25 Pack - Gutter Brackets 6 Inch with Bonus 6 Inch Drill Bit - Hidden Bracket Clips with Pre-Assembled Screw - Fix Sagging Rain Gutters
- 6" QUICK SCREW GUTTER HANGER - These hidden hangers for gutters are designed to increase tension on new and existing gutters. Quick screw bracket comes pre-assembled with a large #12 screw with Type 17 point thread. Fits all 6-inch aluminum (non-plastic) gutters..
- FIX SAGGING GUTTERS & LOW SPOTS - Use our 6 inch gutter hangers to repair low spots and un-sag long stretches of gutter. Solve the problem of streams of water getting backed up and pouring over the gutter's edge. Reinforce existing gutters to withstand heavy snow..
- HEAVY DUTY, LOW PROFILE DESIGN - The gutter hangers are engineered with a screw retention dimple that facilitates positive thread engagement, less slipping, firm seating of the screw, no over-torque, and no stripping of the screw head. Remains hidden below the lip..
- EASY INSTALLATION W/ NUT DRIVER - Install the 6 inch gutter brackets using a 1/4" nut driver and cordless drill. Split-less clip means no snagging and faster installation into the rafter end. Total penetration depth is 1-3/8". Ideal for straight or angled fascia boards..
- INCLUDES BONUS 6" YONICO DRILL BIT - Includes a bonus 6" YONICO drill bit for additional clearance and easier installation. YONICO is the same trusted brand carried by big box stores across the country. T....
Check StockElectric Screwdriver Kiprim 4V Rechargeable Adjustable Torque Cordless Screwdriver Gun with 33 Magnetic Bits Set (2 Drill Bits included),Dual Flashlights,Carrying Box,Type C Cable
- Drywall screw gun has helical-cut steel and heat-treated gears for long life and durability.
- DEWALT drywall screw gun has a high torque for deck building, drywall and heavy gauge steel stud framing.
- The drywall gun has metal gear housing for jobsite durability and increased reliability.
- Depth-sensitive, "set and forget" nosepiece for consistent fastener depth.
- Two-finger trigger for increased comfort and ease of use.
- Excellent ergonomics offers less user fatigue.
Check Stock