Reviews Hidden Deck Fastener Clips

Start Clips - Universal Starter Deck Clips, Start Clips for Decking, Hidden Fasteners & Deck Starter Clips with Decking Screws (36 Pack, Black)

  • 【Characteristic】 Start clips are specially used to install perimeter deck boards to make the installation of grooved composite deck easier. Hidden starter clips provide you a high-quality solution and a clean and fastener-free deck appearance..
  • 【Material】 The start hidden fasteners made of high-quality stainless steel have strong corrosion resistance and are very suitable for indoor and outdoor use. The starter clips have high strength and perfect toughness, which can improve the installation efficiency greatly and have a better fastening effect on the deck..
  • 【Contents】 You will get 36 high-quality start clips, 38 stainless screws and 1 drive bit. Adjust the installation method according to actual usage requirements, and place a decking clip every 12 to 16 inches..
  • 【Application】 It is recommended to install the universal starter deck clips on the center edge of the joists, align the back of the deck starter clips on the same edge and fix them with screws, and then you can push the first board into the starter clips gently..
  • 【Service】 We provide you with 100% return and 24-hour friendly customer service. If you are disappointed with this start clips, we can exchange them for free or give you a full refund..
Check Stock

Deck Clips Pack of 36 | Grooved Decking Clips and Deck Screws | Deck Starter Clips for Composite Deck Boards | Universal Starter Deck Clips with Decking Screws

  • EASILY INSTALLS- These starter clips are used for the perimeter deck boards and easily install in grooved composite decking boards. Place one at the center edge of every joist 12"-16" apart..
  • THE PERFECT WAY TO DECKING- These hidden deck clips install below deck and help decking stay in place, without all the drill marks in your boards!.
  • WHAT’S INCLUDED- Purchase includes 36 deck screws, drive bit, and 36 deck clips..
  • CONTRACTORS- We always offer discounts when purchasing 5 or more of any of our products..
Check Stock

NewTechWood PCHFS50 50-Square Feet Composite Decking Hidden Fastener, Black

  • Kit includes 175 BLACK hidden deck clips, 190 #8x2” black T15 stainless steel screws, driver and drill bits plus gap spacer tools.
  • 175 count kits will fasten 100 Sq. Ft. of decking (16" on Center).
  • Use with pre-grooved 5/4 or 1x hardwoods, composites and PVC material.
  • Stainless Steel Insert molded inside the deck fastener prevents overdriving of the Screw during installation.
  • Spacer leg automatically sets the gap between boards for consistent spacing.
Check Stock

Fastenmaster Cortex for Decks Hidden Fasteners - Trex Transcend Tiki Torch 100 Lin.ft

  • Kit includes 175 BLACK hidden deck clips, 190 #8x2” black T15 stainless steel screws,driver and drill bits plus gap spacer tools.
  • 175 count kits will fasten 100 Sq. Ft. of decking (16" on Center).
  • Use with pre-grooved 5/4 or 1x hardwoods, composites and PVC material.
  • Stainless Steel Insert molded inside the deck fastener prevents overdriving of the Screw during installation.
  • Spacer leg automatically sets the gap between boards for consistent spacing.
Check Stock

TigerClaw Phillips Flat Head Black Oxide Stainless Steel Scrails Collated Fasteners 930 per box

  • The fastest all stainless hidden deck fastener system.
  • Coated black to blend screw into black clips.
  • Stainless steel for extreme environments.
Check Stock

Topdex Hidden Deck Fasteners - Strong Plastic Clips with Stainless Steel Screws Inserts 0.19' Gap Spacing Between Wood Flooring Boards - Outdoor Decking Hardware, (90 Clips - 50 sqft)

  • A Sleek-Looking Deck – Build your decking like a pro with the help of these plastic fasteners. These flooring spacers let you mount your boards to the joists while keeping the screws hidden from sight..
  • Consistent Gap Spacing – Maintain the streamlined look of your decking and balcony flooring with these clips. Each plastic clip is designed to create a 0.19″ gap in between your terrace boards..
  • Easy Installation – Save time, effort, and energy in building your deck. To mount, just insert the clip into the side groove of your decking board, drive the screw with your drill, and you’re all set..
  • Crafted To Last – The last thing you need are decking clips that easily break. Our clips are made of tough plastic, while the screws are made of stainless steel that withstands rust or corrosion..
  • Decking Tools With Unbeatable Value – Get the most out of your money whenever you purchase our decking fastener clips. Each pack comes with plastic fasteners and stainless steel mounting screws..
Check Stock

Myard Universal Hidden Deck Fastener Clips for Grooved Edges of Composite Decking Boards to Joists, 1/4' Gap Spacing, with Square Driver Bit (50-Pack)

  • ▼ Compatible with AZEK, Cali-Bamboo, Deckorators, DuraLife, Envision, EverNew, Fiberon, MoistureShield, Lumberock, TimberTech, Trex, WearDeck, Zuri branded edge-grooved composite, hardwoods, treated lumber, cedar, & vinyl deck boards..
  • ▼ INSTALLATION: (1) Insert a Myard hidden fastener clip into the grooved edges of decking over a joist. (2) Drive the screw ONLY halfway (Fully tighten later once all boards are in place). The wings must remain level with the joist for the next board to fit correctly. (3) Continue to add clips on each joist against deck boards..
  • ▼ INSTALLATION: (4) Install “next” boards, make sure boards are pressed firmly against the clips and secured under the wings. (5) Do NOT over-tighten the screws. Please set proper driver torquing (2 to 6 drill power). The screw head will be resting on the top of the clip, but not sinking into the clip..
Check Stock

Myard Universal Hidden Deck Fastener Clips for Grooved Edges of Composite Decking Boards to Joists, 1/4' Gap Spacing, with Square Driver Bit (100-Pack)

  • ▼ Compatible with AZEK, Cali-Bamboo, Deckorators, DuraLife, Envision, EverNew, Fiberon, MoistureShield, Lumberock, TimberTech, Trex, WearDeck, Zuri branded edge-grooved composite, hardwoods, treated lumber, cedar, & vinyl deck boards..
  • ▼ INSTALLATION: (1) Insert a Myard hidden fastener clip into the grooved edges of decking over a joist. (2) Drive the screw ONLY halfway (Fully tighten later once all boards are in place). The wings must remain level with the joist for the next board to fit correctly. (3) Continue to add clips on each joist against deck boards..
  • ▼ INSTALLATION: (4) Install “next” boards, make sure boards are pressed firmly against the clips and secured under the wings. (5) Do NOT over-tighten the screws. Please set proper driver torquing (2 to 6 drill power). The screw head will be resting on the top of the clip, but not sinking into the clip..
Check Stock

DeckWise (Black) Ipe Clip EXTREMEKD Hidden Deck Fasteners, 1/4' Spacing, Stainless Steel Black #8x2' Trim-Head Screws for 600 Sq. Ft. of KD Hardwood, Thermal or Composite Decks (1050 Bucket)

  • Kit includes 1050 BLACK hidden deck clips, 1140 #8×2” black T15 stainless steel screws, driver and drill bits plus gap spacer tools.
  • 1050 count kits will fasten 600 Sq. Ft. of decking (16″ on Center).
  • Use with pre-grooved 5/4 or 1x hardwoods, composites and PVC material.
  • Stainless Steel Insert molded inside the deck fastener prevents overdriving of the Screw during installation.
  • Spacer leg automatically sets the gap between boards for consistent spacing.
Check Stock

DeckWise (Brown) Ipe Clip Extreme Hidden Deck Fasteners, 3/32' Spacing, Includes Stainless Steel Black #8x2' Trim-Head Screws for 600 Sq. Ft. of AD Hardwood or Thermal Wood Decks (1050 Bucket)

  • Kit includes 1050 BROWN hidden deck clips, 1140 #8×2” black T15 stainless steel screws, driver and drill bits plus gap spacer tools.
  • 1050 count kits will fasten 600 Sq. Ft. of decking (16″ on Center).
  • Use with pre-grooved 5/4 or 1x hardwoods, composites and PVC material.
  • Stainless Steel Insert molded inside the deck fastener prevents overdriving of the Screw during installation.
  • Spacer leg automatically sets the gap between boards for consistent spacing.
Check Stock

DeckWise (Brown) Ipe Clip Extreme Hidden Deck Fasteners, 3/32\ Spacing, Includes Stainless Steel Black #8x2\ Trim-Head Screws for 300 Sq. Ft. of AD Hardwood or Thermal Wood Decks (525 Bucket)

  • Kit includes 525 BROWN hidden deck clips, 570 #8x2” black T15 stainless steel screws, driver and drill bits plus gap spacer tools.
  • 525 count kits will fasten 300 Sq. Ft. of decking (16" on Center).
  • Use with pre-grooved 5/4 or 1x hardwoods, composites and PVC material.
  • Stainless Steel Insert molded inside the deck fastener prevents overdriving of the Screw during installation.
  • Spacer leg automatically sets the gap between boards for consistent spacing.
Check Stock

304 Stainless Steel Start Clips Black Deck Clips Universal Decking Clips with Decking Screws for Composite Deck Boards, Hidden Fasteners (40)

  • Stainless Steel Material: starter clips are made of quality 304 stainless steel, strong texture, corrosion resistance, not easy to fade or break, suitable for outdoor installation, can play a nice fastening effect, to provide you with long term service.
  • Use Occasion: composite decking starter clips are applied to install composite decking with grooves on the sides, which conceal themselves while holding the deck in place, making them practical and attractive.
  • Installation Method: place the hidden deck fasteners for composite on the floor joists and fix them with screws, one every 12 to 16 inches, then push the floor into the card, easy to apply, will not waste a lot of your time and effort.
  • Rich Quantity to Meet Your Needs: the package includes 40 pieces of hidden deck clips, plenty quantity to meet your use demands, replacement demands and sharing demands, can give you a nice shopping experience.
  • Equipped with Screws: each starter clips for composite decking comes with a suitable stainless steel screw, easy to install, which can save you the trouble of buying screws and bring you a nice use experience.
Check Stock

NATIONAL NAIL 345001 Marksman Pro Tool

  • Tool used in conjunction with screws and bit.
  • Provides a low cost, fastener free deck surface.
Check Stock