Reviews Hex Washer Head Anchor

50 Pcs 3/8 x 3 Zinc Plated Concrete Anchors Masonry Screws Heavy Duty Carbon Steel Concrete Anchors and Screws Kit Hex Head Large Diameter Concrete Anchor Bolts for Brick Blocks Cement

  • Adequate Quantity: there are 50 pieces of concrete anchors, suitable for large volume work, meeting your daily needs, and can also be shared with your family and friends.
  • Pocket Size: each of concrete screws and anchors is about 3/8" x 3", and weighs only 1.3 ounce/ 37 g, fine workmanship, and easy to carry around, providing you with much convenience.
  • Quality and Sturdy Material: hex concrete anchors are made of carbon steel, with galvanized surface to resist rust, and feature higher hardness, hard and not easy to deform, especially practical for dry environment.
  • Novel Design: featuring low torque threads, masonry screws have deep and clear threads, which can make concrete penetration easily, and also simple to install.
  • The anchor has a finished hex washer head with anti rotation serrations to keep the anchor away from backing out.
  • Wide Range of Applications: hex head concrete screw anchor is mainly designed for concrete, masonry, brick or block.
  • Note that using a standard drill bit for installation, the drill bit size is the same as the anchor diameter.
Check Stock

Red Head SLDT-3830 Stainless Steel Large Diameter Tapcon 3/8-Inch by 3-Inch Anchor 50 per Box

  • Anchor Bodies are Made from Stainless Steel.
  • Finished Hex Washer Head, with Anti-Rotation Serrations.
  • Anchor is Stamped with a Length Identification Code.
Check Stock

Red Head SLDT-3840 Stainless Steel Large Diameter Tapcon 3/8-Inch by 4-Inch Anchor 50 per Box

  • Anchor Bodies are Made from Stainless Steel.
  • Finished Hex Washer Head, with Anti-Rotation Serrations.
  • Anchor is Stamped with a Length Identification Code.
Check Stock

Dewalt Engineered by Powers 1/2 x 3 Screw-Bolt+ Concrete Screw Anchor Zinc PFM1411380 50/BX

  • Low installation torque in concrete and masonry.
  • Ratchet teeth on underside of hex washer head lock against the fixture.
  • Diameter, length and identifying marking stamped on head of each anchor.
  • Can be installed closer to a free edge than traditional expansion anchors.
Check Stock

3/8 x 4 DeWALT Engineered by Powers Screw-Bolt High Performance Screw Anchor Zinc-Plated 50

  • Low installation torque in concrete and masonry.
  • Ratchet teeth on underside of hex washer head lock against the fixture.
  • Diameter, length and identifying marking stamped on head of each anchor.
  • Can be installed closer to a free edge than traditional expansion anchors.
Check Stock

3/8 x 5 DeWALT Engineered by Powers Screw-Bolt High Performance Screw Anchor Zinc-Plated 50

  • Low installation torque in concrete and masonry.
  • Ratchet teeth on underside of hex washer head lock against the fixture.
  • Diameter, length and identifying marking stamped on head of each anchor.
  • Can be installed closer to a free edge than traditional expansion anchors.
Check Stock

Kuryakyn 7657 Motorcycle Accessory: Receiver Hitch with 1-7/8\ Diameter Trailer Hitch Ball for 2014-19 Harley-Davidson Touring Motorcycles, Black/Chrome

  • ...) 5/16-24 Nylon Insert Locking Nut, (1) Left Side Drawbar, (2) 3/8-24 Nylon Insert Locking Nut, (1) Right Side Drawbar, (2) 1/4-20 X 0.5 Hex Head Cap Screw, (1) Hardware Kit, containing: (1) 5/16-24 X 1.5 Full Thread, Hex Head Cap Screw, (2) Black Spacer .36, (2) Pin, 5/16 X 1.5, (2) Black Spacer .71, (2) 5/16 Lock Washer, (4) 5/16-18X1.75 Black Button Head Cap Screw, (6) 5/16 Flat Washer, (4) 5/16 Black Flat Washer, (2) 3/8 Split Lock Washer, (4) 5/16 Black Split Lock Washer, (2) 3/8 Flat Washer, (2) 5/16-24 X 1.5 Hex Head Cap Screw, (1) 1-7/8” Hitch Ball, (2) 3/8-24 x 2.75 Hex Head Cap Screw, (1) 3/4 Split Lock Washer, (1) 3/4-16 Hex Nut.
  • suggested tools for smooth installation: Combination Wrench Set, Torx Wrench Set, Hex Wrench Set, Torque wrench.
  • This Kuryakyn part is most compatible with Harley: '14-'19 Electra Glides, Road Glides (except '19 FLTRXSE), Road Kings & Street Glides (except '15-'19 FLHXSE).
  • Will not fit with accessory Saddlebag Guard Rails P/N 90200561.
Check Stock

HELIFOUNER 320 Pieces #8#10#14 Hex Washer Head Self Drilling Sheet Metal Screws Assortment Kit, 410 Stainless Steel

  • Type：25 PCS #14 x 2-1/2" Hex Washer Head Self Drilling Sheet Metal Tek Screws.
  • Screw Length：2-1/2 inch or 63mm (measured from under the head).
  • Point Type: Self Drilling Point, #3, appropriate for material thicknesses up to 0.22”.
  • 410 Stainless steel (no coating outside) which is superior to regular steel and zinc plated fasteners, provides good strength and corrosion resistance in bad environments..
Check Stock

#10 x 3/4' Hex Washer Head Self Drilling Screws Black Oxidized, 410 Stainless Steel, 100 PCS

  • Product Type : Hex Washer Head Self Drilling Screws..
  • Screw Size : #10 x 3/4" (Head NOT Included).
  • Package Quantity : 100 PCS Hex Washer Head Self Drilling Screws..
  • Used Widely : For use in wood, fiberglass, and metal. They are strong, corrosion resistant and will support all of your projects..
Check Stock

1/4 Tapcon Style Concrete Screws Slotted Hex Washer Head Concrete Screws to Anchor Masonry Block & Brick 1/4 x 1-3/4 Qty 1000

  • Slotted Hex Washer Head Masonry Screws - 1/4 inch Diameter.
  • Commonly used to anchor fixtures to brick, block or concrete.
  • Blue Climaseal Coating for Corrosion Resistance & Durability.
  • Cuts its own threads into concrete and other masonry materials.
  • Does not include masonry bit for pilot hole.
Check Stock

3/16 Tapcon Style Concrete Screws Slotted Hex Washer Head Concrete Screws to Anchor Masonry Block & Brick 3/16 x 1-1/4 Qty 1000

  • Slotted Hex Washer Head Masonry Screws - 3/16 inch Diameter.
  • Commonly used to anchor fixtures to brick, block or concrete.
  • Blue Climaseal Coating for Corrosion Resistance & Durability.
  • Cuts its own threads into concrete and other masonry materials.
  • Does not include masonry bit for pilot hole.
Check Stock

HVAZI Metric M2 M2.5 M3 M4 M5 Nylon Phillips Pan Head Screws Nut Washer Assortment Kit (Black)

  • High Quality 510PCS Metric M2 M2.5 M3 M4 M5 Black PA66 Nylon Phillips Pan Head Screws Hex Nut Flat Washer Assortment Kit.
  • Thread Diameter: M2/(2mm) with Thread pitch: 0.4mm.
  • Screw thread: M2.5/(2.5mm) with Thread pitch: 0.45mm.
  • Screw thread: M3/(3mm) with Thread pitch: 0.5mm.
  • Thread Diameter:M4/(4mm)with Thread pitch: 0.7mm.
  • Thread Diameter:M5/(5mm)with Thread pitch: 0.8mm.
  • The assortment contains:M2x5mm(20PCS),M2x8mm(20PCS),M2 Hex Nut (40PCS),M2 Flat Washer(40PCS).
  • M2.5x6mm(20PCS),M2.5x10mm(20PCS),M2.5 Hex Nut (40PCS),M2.5 Flat Washer(40PCS).
  • M3x6mm(20PCS),M3x10mm(20PCS),M3 Hex Nut (40PCS),M3 Flat Washer(40PCS).
  • M4x8mm(15PCS),M4x10mm(15PCS),M4 Hex Nut (30PCS),M4 Flat Washer(30PCS).
  • M5x10mm(10PCS),M5x20mm(10PCS),M5 Hex Nut (20PCS),M5 Flat Washer(20PCS).
  • All products are made of durable nylon, Strong,anticorrosive.
  • Type specification complete, the quality is reliable,Easy to install and durable to use.
Check Stock

10 PCS M14-2.0x45 MM Metric Hex Flange Bolts Grade 10.9 Screws Phos & Oil

  • Package Contents：5 sets, each include one hex bolt, hex nut, flat washer and lock washer.
  • Screw Length: 5" or 125mm (measured from under the head).
  • Made of 304 Stainless Steel (no coating outside) which is superior to regular steel and any zinc plated fasteners, provides good strength and corrosion resistance in bad environments.
Check Stock