Reviews Hex Threaded Rods

26 Pack 8/32 Inch Threaded Rods with Hex Nuts M4 12 Inch 304 Stainless Steel Fully Rod Threaded, 13 Pcs M4 300mm Right Hand Threads, 13 Pcs Hex Nuts for Hangers, U-Bolts and Beaded Garden Stake Rods

  • 【THREADED RODS PARAMETERS】Thread Diameter M4: 2.8mm/0.11 ''.
  • 【MATERIAL】304 stainless steel material, corrosion resistance, high temperature resistance, rust resistance and good processing performance.
  • 【FULL THREAD & HEX NUT】For assembly and fastening, threaded rod is a fastener reinforced in threaded nut or threaded hole, right-hand threaded rod stud. Hexagonal nuts are an ideal replacement for industrial and construction fasteners, Simply screw on to a bolt of the same thread size, quick and easy..
  • 【APPLICABLE SCENARIOS】Perfect for auto parts, standoffs, bolts and more metal items that need to be fastened.
  • 13 Pcs full threaded rods, 13 Pcs full threaded hex nuts, 26 Pcs in total, perfect for garden stakes decorative beaded garden stakes etc for outdoor decoration..
  • 【PACKAGE LIST】13Pcs M4×300mm threaded rods, 13 Pcs M4 Stainless Steel Fully Threaded Hex Nuts, which can be cut, heated, drilled and used in multiple dimensions..
Check Stock

12 Pack 8/32 Inch M4 Threaded Rod with Hex Nuts 12 Pcs M4 Stainless Steel Threads Studs Rods 12 Pcs M4 Stainless Steel Fully Threaded Hex Nuts for Beaded Garden Stake Rods (12 Inch)

  • Ample Quantity: the package comes with 12 pieces of 8/32 inch M4 12 inch threaded rods and 12 pieces of M4 hex nuts, a total of 24 pieces, a nice set is ideal for making a dozen (fairy garden stakes)fairy garden stakes or the other projects.
  • Dimension: the threaded rod is about M4 in thread diameter, 300 mm/ 12 inch in total length.
  • The hex nut is about M4 in coarse thread diameter, 0.7 mm/ 0.03 inches in pitch, 0.28 inch/ 7 mm in width across flat, and 0.11 inch/ 2.8 mm in height.
  • Threaded Rods Studs: the 8/32 threaded rod is made of 304 stainless steel, safe, sturdy, with corrosion resistance and antirust ability, and can offer you a long time service.
  • It can be applied for assembly fastening, just screw it into threaded nuts or tapped holes.
  • Hex Nut: the hex nut is an ideal replacement for industrial and construction fasteners and an essential accessory in your daily life, simply screwing it onto a bolt, cap screw or threaded rod of the same thread size, quick and easy.
  • Widely Applicable: these fairy stake rods can be widely applied to bolts, clamps, hangers and U bolts and many....
Check Stock

The Hillman Group 180210 Coupling Nut 1/4 - 20 50-Pack

  • Threaded fasteners for joining two male threads, most commonly threaded rod.
  • Used to make up long rod assemblies from shorter lengths of rods.
  • Similar to hex nuts with extreme height measurements giving them length.
  • Use with fasteners of the same threading and finish.
Check Stock

OEMTOOLS 25553 MacPherson Strut Spring Compressor Heat-Treated Thread Rod Strut Compressors Coil Spring Compressor w/ Forged Hooks 9 Threaded Length Black

  • EASY-TO-USE SPRING COMPRESSOR: Easily remove and replace MacPherson strut springs with the broad contact hooks on our coil spring compressor tool.
  • Our 3/4” (19mm) hex head on the threaded rod is designed to be hand-torqued with a ratchet or wrench.
  • SAFE STRUT SPRING COMPRESSION: Strut compression is dangerous work.
  • Our strut compressor features detent pins that keeps the strut spring in place during compression.
  • Add anti-seizing compound to the threaded rod before using MacPherson Strut Compressor.
  • STRUT MAINTENANCE TOOL: Remove MacPherson strut springs quickly and easily so that you can make repairs to the strut assembly.
  • Access bent struts, strut tubes, and strut cartridges safely thanks to the power of our near universal strut compressor.
  • WON’T BEND DURING USE: Don’t rely on cheaper material to get a dangerous job done.
  • Our durable heat-treated threaded rods on our strut coil spring compressor ensures a smooth compression of strut springs without bending the threaded rod.
  • WORKS ON MOST VEHICLES: Features a threaded length of 9”, making it compatible with most vehicle’s MacPherson strut springs.
  • Attach the threaded rods so that the hooks are set 180° apart.
  • Evenly compress both sides of the strut spring compression tool.
Check Stock

Otis Patriot Series FG-701-40 .40 cal Pistol Kit

  • 100% cotton 3” patches, .40 caliber mop, square patches, long slotted tip and two rods.
  • 8” aircraft grade Memory-Flex cables with large slotted tip for proper Breech-to-Muzzle cleaning.
  • Multi-purpose tool functions as a t-handle, rod handle (attach a rod to the 8-32 threaded insert) and bit driver (insert selected bit into bit holder). Four bits included: 5/32” hex, T20 hex, Phillips #0, Phillips #2.
Check Stock

5pcs M8 x 1.25 x 35mm Stainless steel Long Coupling Hex Nut Connector

  • 1/4-28 X 7/8" long, fine threads, 3/8" across the flats steel coupling nut with zinc finish.
  • Coupling nuts are threaded fasteners for joining two male threads, most commonly threaded rod.
  • Zinc plate over steel - more rust resistant.
  • Coupling Nuts are used to make up long rod assemblies from shorter lengths of rods.
Check Stock

NICEYRIG 15mm Rail Riser Rig System Quick Release Base Kit with QR Plate 15mm Rod Riser Clamp Short Rods Applicable DSLR Camera

  • ...ont and back. The wingnut of 15mm rod clamp allows the adjustment of the rods easily..
  • Two short rods (2.5inch length) with 15mm riser rod clamp are attached on this easy cheese plate to used for DSLR camera baseplate lifting system. The Easy plate is equipped with various threaded holes(1/4" 3/8" screw threaded) in 9mm spacing..
  • Made of aluminum alloy, lightweight and durable. Package Includes: 1x 15mm rail riser kit, 1x hex spanner, 1x 1/4 tripod screw, 1x 3/8 tripod screw.
Check Stock

Masmoc 10Pack M8 x 80mm Fully Threaded Rod Stud 304 Stainless Steel Threaded Screw Right Hand Threads M8-1.25 Thread Pitch with 20PCS Hex Nuts and 20pcs Washers

  • Package :M8 x 80mm right hand full threaded rod 10PCS, M8 hex nuts 20PCS, M8 washer 20PCS..
  • Thread rod Dia.: M8, Thread Pitch: 1.25mm,total length: 80mm made of 304 stainless steel, provides great corrosion resistance and anti-rust ability for long service life, thread direction: right-hand thread..
  • These threaded rods and studs are fasteners that screw into threaded nuts or tapped holes, allowing for assembly of components..
  • These threaded studs can be drilled, cut, heated and shaped and widely applied in many occasions: anchor bolts, clamps, hangers and U-bolts and many more projects..
Check Stock

Murtenze 2Pcs M5 x 250mm Fully Threaded Rod, 304 Stainless Steel Long Threaded Screw Right Hand Threads (Silver)

  • Package & Size - You will get 2 pcs 5mm x 250mm threaded rods worth of.
  • Total length: 251 mm/9.84 inches. Fully threaded rods and studs can be drilled, cut, heated and formed.
  • Durable Material - These m5 threaded rods are made of 304 stainless steel, with excellent corrosion resistance and rust resistance, and long service life.
  • How to Use - Our stainless steel threaded rods can be used for assembly and fastening, screwed into nuts or threaded holes, and cut to the length you want.
  • Widely Application - These threaded rods and studs m5 are suitable for various applications, such as anchor bolts, fixtures, hangers, U-bolts, welding protrusions, and even model building, etc..
  • Satisfied Service - 100% Satisfaction If there is any quality problem with our product, we will reply within 24 hours. And you can return the product and get a refund within 30 days from receiving. You have no risk of trying, please order with confidence and no hesitate..
Check Stock

uxcell Hex Socket Self Tapping Screws M4 x 30mm Carbon Steel Wood Screw 50pcs

  • Made of carbon steel, which has higher hardness, corrosion resistance and rust resistance..
  • The self-drilling screws can drill well into the wood, sheet metal and other surfaces. The thread can reduce the resistance when screwing in and prevent cracking..
  • It can also connect metal hardware to the wood well because the threaded rods provide good retention in the wood..
  • Widely used in various industries such as manufacturing, construction, engineering, and assembly..
Check Stock

uxcell Hex Socket Self Tapping Screws M3 x 8mm Carbon Steel Wood Screw 400pcs

  • Made of carbon steel, which has higher hardness, corrosion resistance and rust resistance..
  • The self-drilling screws can drill well into the wood, sheet metal and other surfaces. The thread can reduce the resistance when screwing in and prevent cracking..
  • It can also connect metal hardware to the wood well because the threaded rods provide good retention in the wood..
  • Widely used in various industries such as manufacturing, construction, engineering, and assembly..
Check Stock

10Pcs M8 x 250mm 304 Stainless Steel Fully Threaded Rods, Threaded Rods Bar Studs, Right Hand Thread Long Threaded Screw, M8-1.25 Thread Pitch, Fits for Anchor Bolts, Hangers, U-Bolts (5/16\ x 10\)

  • 【Quality Material】These m8 threaded rod made of 304 stainless steel, which provides excellent corrosion resistance and anti-rust ability for long service life.
  • 【Package Content】You will get valued 10 pack of 8mm x 250mm threaded rods.
  • The fully threaded rods & studs can be drilled, cut, heated and shaped.
  • 【All Threaded Rods】Our stainless steel thread rod can be used for assembly fastening, screw into threaded nuts or tapped holes, cut to your desired length.
  • 【Wide Application】These 5/16 x 10 inches threaded rods are suitable for a wide variety of applications, such as anchor bolt, clamps, hangers, U-bolts, weld projections, even model building and more projects.
Check Stock

1/4-20 Threaded Insert Kit for Wood Furniture Screw Threaded Wood Insert Nut 10mm 15mm 20mm Length 61-Piece

  • 20 pieces of 1/4-20 x 20 mm threaded inserts + 20 pieces of 1/4-20 x 15 mm threaded inserts + 20 pieces of 1/4-20 x 10 mm threaded inserts + 1 piece 6mm hex key..
  • Threaded inserts are made of carbon steel, they feature durable construction for a long-lasting hold..
  • Threads diameter of 1/4-20 x 20mm / 15mm: 0.410" / 10.4mm, threads diameter of 1/4-20 x 10mm: 0.389" / 9.9mm..
  • Threaded Inserts are best for composite materials, soft wood, plywood and hardwood, you just need to drill a hole that the size of the body into the wood for the threaded insert..
  • Hex Drive Threaded Insert with 1/4-20 Internal Thread Size, the hexagon drive allows for easy installation..
Check Stock