Reviews Hex Shank Adapter

FACHLICH Diamond Core Drill Bits Set - 10pcs Tile Hole Saw Kit 6/8/10/25/35/50/65mm with 2" Diamond Beveling Chamfer Bits for Porcelain Ceramic Tile Granite Marble

  • 10pcs in total,7pcs(6/8/10/25/35/50/65mm) Diamond drill bits,1pc 10mm Diamond Finger Bit,1pc 2" Diamond Beveling Chamfer Bits and 1pc 5/8-11 to SDS Shank Adapter.
  • Dry/wet drilling for porcelain tile, granite, marble, stone, Masonry, brick....
  • Maximum RPM is 11000. All bits are produced in Vacuum Brazed technology..
  • All bits are suitable for 5/8"-11 thread angle grinder；The Hex adapter can change 5/8"-11 to Hex shank；SDS adapter can change 5/8"-11 to SDS thread..
  • If you fit them on electric drill or other machine, you need an adapter such as Hex Shank or SDS Plus Shank..
Check Stock

Milwaukee 48-32-5033 Power Drill Bit Extensions Shockwave Socket Adapter Set, 1/4\

  • ...ction head is equipped with a locking and magnetic device, to ensure that the sleeve does not fall.Built-in strong magnet for good holding power, accepts all 1/4" standard hexagon shank bits.Apply to all electric drill and socket wrench, which allows to reach unreachable or tight spaces..
  • ☆☆ 3Pcs Colorful Socket adapter impact set - 1/4" drive adapter, 3/8" drive adapter, and 1/2" drive adapter and each with a 1/4 inch hex shank driver socket adapter set .Connect impact sockets/socket wrenches/sockets bits/driver sockets to power cordless.
  • ☆☆ 1/4 Inch Hex Shank Magnetic Extension Chuck Adapter Quick Release Bar Socket Screwdriver Bit Holder | 60mm/ 100mm/ 150mm Length,Suitable for electric, pneumatic screwdrivers and other screwdriver bits of power tools, drill extended..
  • ☆☆ 1 Pack include 3 different most useful tools,used in the installation of pneumatic screwdriver, electric screwdriver, pneumatic drill, manual screwdriver and other installation for the hexagonal tool ..
Check Stock

Quick Release 1/2-Inch Square Drive to 1/4-Inch Hex Female Socket Impact Adapter Drill Chuck Set of 2 for Air and Electric Impact Wrench

  • 【Premium Material】: Made of high quality material for maximum strength and durability. Convert any air or power impact wrench into a drill or ratcheting wrench into a driver with this single piece chuck converter. Quick Release 1/2-Inch Square Drive to 1/4-Inch adapter securely holds any 1/4" hex-shank bit.
  • 【Easy to install】: Quick-release mechanism allows for easy, one-handed swapping between bits while working. This adapter with an impact wrench can take off any brake rotor screw in less than ONE second.
  • 【Perfect Experience】: Quick-release mechanism allows for easy, one-handed swapping between bits while working, fits tightly both ends, firm grip onto the drill, and holds the bit nicely. Adapter securely holds any 1/4" hex-shank bit (including insert bits).
  • 【Safe Operate】: Quick Release & Security Lock Design: 1/2 Inch Square Female to 1/4 Inch Hex Female Socket Adapter. The quick release made it very easy to swap between the screwdriver bits, drill bits with hex shank, or socket adapter.
  • 【Service】: Thank you for choosing our product. If the product has any quality problems ,please feel free to contact us before making an evaluation. Thank you for your cooperation. We offer 24 hours customer service to convenient for customers.
Check Stock

Flexible Drill Bit Extension Set, Includes 105° Right Angle Drill, Bendable Drill Bit Extension, 3pcs 1/4 3/8 1/2\ Universal Socket Adapter Set, 3pcs Drill Bit Holder, Screwdriver Bit Kit

  • 【Complete Collocation】Package included 1pcs bendable drill bit extension, 1pcs 105° right angle drill extension, 3pcs 1/4 3/8 1/2" universal socket adapter set, 3pcs Drill Bit Holders, 10pcs screwdriver bit set. These extension kit work great, when you have limited access..
  • 【1/4" 105° Right Angle Drill Attachment】105° Angle 1/4 inch Hex Drill Bit Screwdriver Socket Holder Adaptor,which is quick change compatible and fits most power drill, rechargeable drill, manual wrench and driver chucks..
  • 【Impact Driver Bit Set】1/4 Hex Shank Socket Adapter Impact Set Square Nut Driver Drill Bit 1/4" 3/8" 1/2" ,connect to the standard hex nut drivers, impact hole saws, spade bits and more..
  • 【Drill Bit Holders】1/4 Inch Hex Shank Magnetic Extension Chuck Adapter Quick Release Bar Socket Screwdriver Bit Holder | 60mm/ 100mm/ 150mm Length,Suitable for electric, pneumatic screwdrivers and other screwdriver bits of power tools, drill extended..
  • 【Flexible Shaft Drill Bit Extension】Length: 29cm/11.42" (Approx.).
  • Features: for Electronic Drill, Connecting Link, Flexible..
Check Stock

Impact Grade Socket Wrench Adapter Extension Set Turns Power Drill Into High Speed Nut Driver,1/4-Inch Hex Shank to Drive for Adapters to Use with Drill Chucks,Sizes 1/4' 3/8' 1/2',Cr-V,Black,3-Piece

  • ☞ PACKAGE CONTAINS:3Pcs - 1/4" drive adapter, 3/8" drive adapter, and 1/2" drive adapter and each with a 1/4 inch hex shank driver socket wrench adapter set .1/4" 3/8" 1/2" Turns any power drill into a power nut driver Sturdy spring-loaded ball bearing holds sockets securely in place Sockets Snap-On Tightly and Won't Slip Off.
  • ☞USES: Attach these Versatile Extender Bars to any Powered/Cordless Drill Chuck or Impact Driver to turn it into a High-Speed Nut Driver – Useful for Automotive Mechanic Vehicle Repairs, Technicians, Handyman & Hobbyist Developments to use with sockets on Hardware/Tire Nuts, Lag Bolts, Hex Head Cap Screws at Home, Workshop Factory or Construction Site.
  • ☞Multifunction: 3Pcs1/4 3/8 1/2" Square Nut Hex Shank Driver Drill Bit Used in the installation of pneumatic screwdriver, electric screwdriver, pneumatic drill, manual screwdriver and other installation for the hexagonal tool .It is a good accessory for conversion. for Universal Socket,Impact Adapter and Reducer Set,Universal Joint Set,Socket Adapter and Drive Reducer Set,Drive Impact Socket Extension Bar Set,Drive Impact Socket Set.
  • ☞Durability: Quality is a guarantee with this 3 piece sturdy and durable solid steel set designed to withstand torque compression under most ....
Check Stock

DT-DIATOOL Diamond Core Drill Bits Kit for Porcelain Tile Ceramic Marble Granite Concrete Hole Saw (19/28/35/45/51mm) + Finger Bits (20mm) + 2 Adapters

  • 【Specification】Totally 8pcs/box: 5pcs(19/28/35/45/51mm) drill bits + 1pc 20mm finger bit + 1pc hex shank adapter + 1pc M14 to 5/8"-11 adapter..
  • Drill bits: Diameter 19mm-51mm, 5/8-11 thread, total length 75mm(3 Inch).
  • Finger bit: Diameter 20mm, 5/8-11 thread, total length: 65mm. Workable length 50MM, Grit #50/60..
  • Hex adapter: 5/8"-11 male thread, 3/8" hexagon shank.
  • M14 adapter: 5/8-11 male thread to M14 female thread.
  • 【Application】Drills Bits for dry or wet drilling holes.
  • Finger Bits for grinding,enlarging or shaping holes on porcelain ceramic tiles, granite, masonry,marble,concrete,etc. Adapters change 5/8 Inch-11 thread to 3/8-Inch hexagon shank or M14 thread and allow your bits to fit a wider range of machines..
Check Stock

SEDY 9-Pieces Impact Socket Adapter Set & Magnetic Bit Holder, 1/4\ Hex Shank with 1/4\

  • Each adapter made of heat-treated hardened chrome Vanadium(CR-V) steel, good abrasion resistance and high hardness, without breaking or rusting, deliver on long-lasting strength and durability. Includes a 60mm long bit extension bar with magnetized ends to securely hold 1/4-inch bits..
  • Spring loaded ball bearing on head, designed to fit securely while providing versatility and convenience no matter which tool you use. Compatible with common to heavy duty power tools, drivers, hand wrench, and screwdriver handle tools for flexible uses..
  • ▲4-Pieces 1/4" adapter: 25mm length, 30mm length, 50mm length, 65mm length --- can be converted to 6.35mm square head.
  • ▲2-Pieces 3/8" adapter: 50mm length, 65mm length --- can be converted to 9.53mm square head.
  • ▲2-Pieces 1/2" adapter: 50mm length, 73mm length --- can be converted to 12.7mm square head.
  • ▲1-Pieces 2.5 Inch magnetic bit extension piece with a 1/4-inch bit end..
  • All socket-drive adapter are 1/4” hex shank, hex adapter for square drive, the 1/4" hex shank air impact driver sockets fit all quick change chucks as well as standard drill chucks, fast connect, work on quick change drill chuck, standard drill chuck, handheld screwdriver, electric screwdriver, change your hand socket set into a driver soc....
Check Stock

NEIKO 30275A Impact Wrench Adapter | 1/2 Drive Female to 1/4 Hex Converter | Quick Release | Quick Change Chuck | Square to Hex Bit Adapter| Impact Rated Cr-Mo Steel for Ratchet Wrenches Drivers

  • CONVERSION: Each hex to square to hex adapter /converter has duo ends. Female 1/2 inch adapter on one end and a 1/4 inch female hex-adapter on other....
  • PREMIUM QUALITY: Each impact to hex chuck adapter is made with a heavy-duty chrome molybdenum steel construction for durability and allows for the....
  • MULTI-FUNCTIONING: This impact chuck adapter converts any air or power impact wrench into a drill or ratcheting wrench into a driver or impact....
  • QUICK-CHANGE: The 1/2” drive quick-release mechanism in the chuck allows for easy, one-handed swapping between impact driver bits while working.....
  • 1/4” FIT: This impact hex adapter securely holds any standard screwdriver bits in a 1/4" hex-shank bit (including insert drill bits) to eliminate....
Check Stock

7 Pcs Impact Drill Sockets Adapter Drill Bit Adapter Set, 3 Hex Shanks Socket Adapter, 3 Pcs 360 Degree Rotatable Power Drill Sockets Adapter, 105 Degree Right Angle Screwdriver for Automotive DIY

  • What you will get: there are a total of 7 pieces of impact grade driver sockets adapter extension kit, including 1 piece 105° right angle drill driver, 3 pieces of hex shank power drill socket adapters including 1/4 inch, 3/8 inch and 1/2 inch, and 3 pieces of square nut hex shank driver drill bits including 1/4 inch, 3/8 inch and 1/2 inch, you can choose the appropriate size of tool to use.
  • Multifunction extension set: the 1/4 inch, 3/8 inch and 1/2 inch hex shank drill bits are made of quality steel materials, suitable for the installation of hexagonal tools such as pneumatic screwdriver, electric screwdriver, pneumatic drill, manual screwdriver, etc..
  • Flexible tools: 360 degree rotatable socket adapter set has high strength and wear resistance, it's practical and durable, which can evenly distribute the torque load on a greater surface area, so it allows access to a narrower workplace, and significantly improves the performance, which is more convenient to use and saves effort.
  • Rugged and durable: 105 degree angle steel drill bit is made of reliable chromium vanadium steel, with strong strength, high hardness, durability and rust resistance.
  • It can be connected with electric drill, rechargeable electric drill....
Check Stock

Flexible Drill Bit Extension + 105° Right Angle Drill Attachment Socket Adapter + Mini Screwdriver Set 10 PCS Ratcheting Pocket Screwdriver Bit Set Tool Accessories Kit for Narrow Confined Space-FB12

  • ✮ [PREMIUM MATERIAL]-Drill bit extension set includes12 pcs tools:105 Right Angle drill attachment and 10 pcs screwdriver bits made of heavy-duty....
  • ✮[105 RIGHT ANGLE DRILL ATTACHMENT ]- With standard 1/4'' Hex Shank and 1/4'' Hex Socket, this right angle drill bit attachment adapter is....
  • ✮ [BENDABLE FLEXIBLE DRILL EXTENSION]-11.7" bendable flexible drill bit extension can be used for ordinary hand drill and electric drill. Bend,....
  • ✮ [MIXED SCREWDRIVER BIT SET]- 10 PCS screwdriver bits are included: 3 size slotted screwdriver bits, 4 size Phillips screwdrivers and 3 size Torx....
  • ✮[UNIVERSAL 1/4” HEX SHANK]- Both of the flexible drill bit extension and the right angle drill attachment have a universal 1/4” hex shank....
Check Stock

STEELHEAD 37-Piece Precision Mini Ratchet Socket & Screwdriver Bit Set 1/4” 72-Tooth Mini Ratchet 5 Hex 4 Phillips PZ 4 3 Slot Bits 9 1/4” MM Sockets USA-Based Support

  • [72-TOOTH QUICK-RELEASE MINI RATCHET] - Includes 1/4” ratchet with push-button quick release. 72-Tooth gearing allows for a super-tight 5⁰ swing....
  • [13 SCREWDRIVER BITS & 9 SOCKETS] – Wide array of 1” (25mm) 1/4” hex shank screwdriver bits (hex, phillips, slot, star) and 1/4” square drive....
  • [QUICK RELEASE 1/4” HEX SHANK BIT ADAPTER] – Easily change between screwdriver bits with the include bit adapter..
  • [3” EXTENSION w/ GRIP] – 1/4” Square drive extension with added texture grip for added torque..
  • [LIFETIME ] – Protected by an unbeatable Lifetime . Backed by US-Based product support & customer service.
Check Stock

Renekton 3/8” Drill Chuck with 1/4” Quick Change Hex Drive, Convert Impact Driver Hammer and Wrench to Drill

  • DURABILITY: The chuck is high precision threaded and tapered tightly with rust-resistant Cr-coated body and sleeve electrophoretic enameling coating. All the extensions are applied with rust-proof finishing for extended service life..
  • HIGHLY COMPATIBLE: Classic keyed 3-jaw design securely holds a wide range of twist drills and step drill bits with 1/16” to 3/8” shank..
  • UNIVERSAL SHANK: Drill chuck with 1/4 inch hex shank quickly connects to any impact driver and converts to drilling function..
  • MULTI PURPOSE: With included 1/2” Drive by 1/4” Hex adapter, can easily transform power impact wrench to a drill, with best performance under rotation speed between 500rpm ~ 3500rpm..
  • INCLUDES: This complete power tool conversion kit includes keyed 3/8” drill chuck, a chuck key and a 1/2” Dr. x 1/4” Hex adaptor..
Check Stock

26Pcs Flexible Drill Bit Extension Set,Drill Bit Holder Extension,105° Right Angle Drill Attachmentt,1/4 3/8 1/2"Impact Driver Rotatable Socket Adapter,Bits Holder,Bendable Drill Bit Extension

  • ...gh-quality industrial-grade heavy-duty chrome vanadium steel. Set of drill including 1 x Screwdriver Bits Holder Set(6pcs 1/4 hex shank handle keychain extension rod with a black metal hanging buckle)2 x flexible drill extension, 1 x 105° right-angle drill bit extension, 3 pieces of (1/2, 3/8,1/4) universal socket adapter kit, 3 x quick release magnetic drill extension Pieces, 10 in 1 set combination screwdriver bit set, durable, and can be used for a long time..
  • [1/4inch Hex Shank Screwdriver Bits Holder Set] ---- Bits hold/quick change, Can avoid accidental dropping of tools and facilitate high-altitude operations.Application--Universal 1/4" quick hex shank and 1/4" hex socket keep different commonly used 1/4 bits handy. Fit most electric drivers, hand-held drivers and bits, like t25 and t20 bits etc.Large Load-- cancarry bits tools up to 500g in weight. To keep the drill bits not easy to fall.It is made of aluminum alloy, nice durability, lightweight, sturdy, which ensure their longevity..
  • [105° Right Angle Drill Attachment] ---- 105° Bend Narrow Space Available--Use in which you use when you have hard places to get to, can to connect a drill, r....
Check Stock