Reviews Hex Shaft Connection

uxcell 8mm Inner Dia H13*D16 Rigid Flange Coupling Motor Guide Shaft Coupler Motor Connector 2PCS for DIY Parts

  • Inner Diameter: 8mm/0.31 inch, Total Height: 13mm/0.51 inch, Cylinder Outer Diameter: 16mm/0.63 inch, Cylinder Height: 10mm/1.31 inch, Base Diameter: 32mm/1.26 inch, Base Height: 3mm/0.12 inch, Mounting Hole Distance: 24mm/0.94 inch,2 x M4 Fastening Screws.
  • Type: Flange Shaft Coupling, suitable for model shaft connection, perfect accessories for RC Model motor, etc..
  • Material: Aluminum Alloy, hardened by heat treatment, and then electroplated. Durable and insulation, make your shaft more stable, easy to install and replace..
  • Function: A special coupler, which can fix one shaft to a plane and install other parts on the shaft easily. Double connection points fasten the coupler tightly..
  • Package: 2 x 8mm Flange Shaft Coupling, 4 x Fastening Screw( M4 Hex Wrench Not Included Here ).
Check Stock

uxcell Flexible Extension Screwdriver Bit Holder Magnetic Extention Hex Shaft Screw Drill Connection Tip,6.7-inch Flex Shaft,1/4''-Hexagon Drill

  • Features -- Total Size: 170x13mm/6.7 x 0.51-inch(L*Max. Dia.).
  • Size -- Connection hex shank drill site size (6.35mm) (1/4) 0.25-inch.
  • Connecting parts of the batch Hex size (6.35mm) (1/4) 0.25-inch..
  • Material -- This flexible shaft is made of carbon steel and plastic which make it practical and durable..
  • Widely compatible -- This extension shaft is for Small wrench, cordless screwdriver, low speed DC hand drill, pneumatic screwdriver, torque drill, electric screwdriver..
  • Widely used -- Bends,twist and turns to use drill into tight and confined spaces. Suitable for ordinary hand drill and electric drill with perfect performance. Applied to hardware maintenance and repair, including computer chassis, electrical cabinets, furniture, electrical appliances, etc..
Check Stock

Flexible Drill Bit Extension Kit, 11.7inch Bendable flexible extension Bit, 10Pcs Screwdriver Bit Set and 90° Right Angle Screwdriver Bits Soft Shaft for Drive Shaft Tip Drill Bit Adaptor

  • Length: 15.4 inches ( 395 mm ), 11.6 inches ( 295 mm ), 9.8 inches (245 mm ).
  • FIT DRILLS WELL: Connection hex shank drill site size (6.35mm) (1/4) 0.25 inches..
  • Match your screw: Connecting parts of the batch Hex size (6.35mm) (1/4) 0.25 inches..
  • Safety and Convenience: Flexible outside shield protects your hand while inside shaft rotates..
  • Application: This flexible shaft can be used for ordinary hand drill and electric drill. Bends,twist and turns to use drill into narrow spaces and dead ends, such as computer cases, electrical cabinets, furniture, electrical appliances, etc., where the screwdriver cannot work.
Check Stock

Jiayouy 2Pcs Black +2Pcs Silver Flexible Extension Screwdriver Bit Holder Magnetic Extention Hex Shaft Screw Power Drill Connection Tip 11.8 inch

  • Length: 11.8 inches ( 295 mm ),Connection hex shank drill site size (6.35mm) (1/4) 0.25in.
  • Connecting parts of the batch Hex size (6.35mm) (1/4) 0.25in.
  • Flexible out shield protects your hand while inside shaft rotates.
  • Bends,twist and turns to use drill into tight and confined spaces.
  • It is an important tool for hardware maintenance and repair, including computer chassis, electrical cabinets, furniture, electrical appliances, etc.
Check Stock

NEIKO 11403A Magnetic Bit Holder Set | 3 Pieces - 2-3/8 4 and 6| Premium Cr-V Steel | 1/4 Hex Shank Design

  • POWERFUL SCREW HOLDERS: Each piece in this bit-holder set has a 1/4-inch universal hex shaft for an easy fit on most drills. These bit extenders....
  • DRILL-BIT EXTENDERS: This versatile hex-shaft bit extension set features bit holders in 3 sizes: 2 3/18", 4", and 6". The hex-drive bit holders let....
  • PRECISION MAGNETIC BIT HOLDERS: These bit extenders have powerful magnets that securely hold driver bits in place, so you can easily turn any drill....
  • HIGH-QUALITY HEX-BIT HOLDERS: Each piece in the NEIKO 11430A Magnetic Bit-Holder Set is made from chrome vanadium steel with a black phosphate coating....
  • HEAVY-DUTY SPECIALTY TOOLS: Our hex-bit holders feature a uniform single-piece construction for added durability. The single-shaft design keeps drill....
Check Stock

2Pairs ShareGoo Front & Rear Steel Drive Shaft Transmission Axle Compatible with Traxxas Slash 4X4 Nitro Rustler VXL Stampede 4X4 1/10 RC Car Truck Silver

  • The front and rear drive shaft compatible with Traxxas Slash 4X4 / Platinum / Ultimate / VXL 4x4 4WD Hoss 4X4 VXL Rustler 4X4 VXL Stampede 4X4 VXL....
  • The slash drive shaft are made of high quality steel material ,the hex wheel hub is made of aluminum alloy,durable in use..
  • Shaft Length Range:110mm-140mm/4.33''-5.51''.
  • Hex Wheel Hub Color:Blue/Silver(Optional).
  • Upgrades parts,designed for lasting performance,improves the overall performance of your rc car..
  • Package includes 2Pcs universal front drive shaft and 2Pcs rear drive shaft & 4Pcs wheel hex hub.The built-in anti-separtion design, reduce the....
Check Stock

TEKTON 1/2 Inch Drive x 19 mm Hex Bit Socket | SHB23219

  • S2 steel bit is press-fit into the socket for a straight, permanent connection that can't loosen over time.
  • 6-sided hexagonal tip is machined to precise tolerances for an exact fit with hex fasteners.
  • Large, clear die-stamped size marking is easy to read and can’t wear off.
  • Four detent grooves provide a secure connection with the drive tool and a drilled through-hole allows locking on with retaining pin.
  • Polished, chrome-plated finish easily wipes clean and is highly resistant to corrosion.
  • Beveled inner rim of the socket opening helps guide it smoothly onto fasteners.
  • Overall Length: 2.2 in., Shaft Diameter: 0.75 in., Drive End Diameter: 1.3 in., Exposed Bit Length: 0.7 in..
Check Stock

2 Pack 8mm Flange Coupling Connector, Rigid Guide Steel Model Coupler Accessory, Shaft Axis Fittings for DIY RC Model Motors, High Hardness Coupling Connector-Silver. (2 pcs 8mm)

  • 【Durable Material】 Ancirs coupling connector is made of fine plating steel, heat and electroplated process make it sturdiness and insulation, striking shaft more stable and easy for installment and replacement..
  • 【Standard Specification】Inner Diameter: 8mm. Cylinder Outer Diameter: 10mm. Cylinder Height: 10mm. Base Diameter: 32mm. Base Height: 2mm..
  • 【Wide Range of Use】Ancirs flange coupler is produced based on International Flange Standard, widely used in model shaft connection, perfect accessories for RC Model motor..
  • 【Package Include】Ancirs flange coupler is packaged with 2 pack 8mm Flange Shaft Coupling + 2x M3 Mini Hex Wrench + 4 x M3 Fastening Screw..
Check Stock

ALLWAY HM5 Helix Paint Mixer Drill Attachment for 5-Gallon Containers

  • Fastest mixer of its kind can be used to mix most viscous fluids, paints, coatings, stains, wall texture and adhesives.
  • Heavy-duty, 5/16" hex shaft provides secure connection to your drill.
  • Reaches edges and bottom of the container for fast, helix mixing with few air bubbles.
Check Stock

Performance Tool W1187 Flex Shaft Carburetor Adjuster Screwdriver

  • FLEX SHAFT CARBURETOR ADJUSTER: The Performance Tool W1187 is a flexible shaft carburetor adjuster screwdriver that makes carburetor adjustment easy and hassle-free..
  • VERSATILE APPLICATIONS: This tool is ideal for use with most GM vehicles and 1.7 to 2.2L Chrysler models manufactured from 1978 to present, making it a versatile addition to any mechanic's toolkit..
  • TIPS STORE IN HANDLE: The tips of the screwdriver conveniently store in the handle or plastic boot, making it easy to keep the tool organized and accessible..
  • HEX SOCKET SIZES: The W1187 features two hex socket sizes, 4.5mm and 1/4", as well as a socket size of double D and a hex bit size of 3/32", providing flexibility and convenience when working with different types of carburetors..
  • FLEXIBLE SHAFT: Measuring 11 1/2" in length, the flexible shaft of the W1187 provides easy access to hard-to-reach carburetor adjustments, making it a reliable and efficient tool for any mechanic or DIY enthusiast..
Check Stock

Zipbolt Handrail to Newel Post Connector — 13.810 Staircase Railbolt, Banister Post Fastener with 5mm Hex and Wood Plugs, Durable, Easy Installation for Residential and Commercial Use

  • ...olts, 2 wood plugs, and 1 hex bit (5mm). Use the instructions on the packaging to guide yourself through the installation process..
  • DURABLE CONSTRUCTION – Made with quality steel for maximum durability, these Zipbolts were created by professionals for residential and commercial use. They provide a solid and stable connection without the frustration of traditional methods..
  • INNOVATIVE PATENTED DESIGN – Zipbolt offers a distinctive patented gear drive that outperforms all others in terms of functionality. The innovative UT gear-driven mechanism eliminates the issues associated with conventional technique of joining stair newel to rail. The railbolt housing's distinctive open channel allows the housing to be dropped directly on the shaft, eliminating the need for nuts and washers..
Check Stock

4 Pack 8mm Flange Coupling Connector, Rigid Guide Steel Model Coupler Accessory, Shaft Axis Fittings for DIY RC Model Motors, High Hardness Coupling Connector-Silver.

  • 【Durable Material】 Ancirs coupling connector is made of fine plating steel, heat and electroplated process make it sturdiness and insulation, striking shaft more stable and easy for installment and replacement..
  • 【Wide Range of Use】Ancirs flange coupler is produced based on International Flange Standard, widely used in model shaft connection, perfect accessories for RC Model motor..
  • 【High cost performance】Ancirs flange coupler is packaged with 4 pack 8mm Flange Shaft Coupling + 4x M3 Mini Hex Wrench + 8 x M3 Fastening Screw..
  • 【Standard Specification】Inner Diameter: 8mm. Cylinder Outer Diameter: 10mm. Cylinder Height: 10mm. Base Diameter: 22mm. Base Height: 2mm..
  • 【100% Satisfaction Guarantee】 If you are not completely satisfied with ANCIRS Flange Coupling Connector, just contact us through Amazon message and we will provide feasible solution for you as promised..
Check Stock

8MILELAKE Auto Truck Dent Puller Tool Set with 10lbs Universal Slide Hammer 13pc Dent Repair Tool

  • 【Long-last and Strong】Heavy duty drop-forged carbon steel construction, tempered and treated with black oxide to resist rust and corrosion for added durability. 10 lb Sliding hammer plated silver, beautiful and long-last.
  • 【Easy to Use】Solid steel shaft with knurled handle for a sure grip. A long shaft allows a more powerful pulling force. Perfect for both home and business. Solid steel shaft with a knurled handle for a sure grip and a long shaft allows a more powerful pulling force. Perfect for both home and business.
  • 【Applications】This dent puller set can work on most cars and trucks. Removes dents for auto body repair work without having to extract the vehicle's inside panels and upholsteries.
  • 【Package Included】1 handle, washer, 5pc hasp iron, long tube hasp iron, cast iron hammer, right angle flat steel, hex taping adaptor, hex taping screw holder, tapping screw, connector hasp iron, and double-barreled connector. Attachments: 1 handle, washer, 5pc hasp iron, long tube hasp iron, cast iron hammer, right angle flat steel, hex taping adaptor, hex taping screw holder, tapping screw, connector hasp iron, and double-barreled connector.
  • 【A Storage Case】Comes with a portable plastic case for easy carrying. Keeps all the repair tools ....
Check Stock