Reviews Hex Bolt Anchor

Concrete Sleeve Anchors 1/2 x 4 - 25 Pcs Hex Head Sleeve Anchors Concrete Bolts Hex Nut Sleeve Anchor Concrete Sleeve Anchor Hex Sleeve Anchors Zinc Plated

  • CONCRETE SLEEVE ANCHORS - Sleeve type anchors feature a split expansion sleeve over a threaded stud bolt body and integral expander, nut and washer.
  • HEAVY DUTY SLEEVE ANCHORS - Steel construction with Zinc-plated finish.
  • CONCRETE HEX SLEEVE ANCHORS - This anchor is designed for use in Concrete, Block, and Brick. Ideal for hand rails, window frames, partitions, cabinets, shelves and pipe supports.
  • SIZE: The head diameter of the anchor is 1/2". The length of the anchor is 4".
  • Package Quantity 25 Pcs Hex Nut Head Concrete Sleeve Anchors.
Check Stock

Wolf Tooth Precision-Machined Seatpost Clamp

  • The seatpost clamp should match the diameter of the seat tube on your frame and not the diameter of the seatpost itself..
  • The M5 bolt includes spherical washer and mates with a cylindrical anchor barrel. This means that threads are always perfectly aligned, preventing binding and ensuring consistent clamping force..
  • Lightweight 6061 T6 aluminum, M5 stainless steel bolt with integrated washer.
Check Stock

L-A M8x70 304 Stainless Steel External Hex Expansion Bolt Screw Sleeve Anchor Expansion Screw Bolt Burst (5 Pcs)

  • Standard size M8 expansion bolt, 70mm total length, with flat washer and hex nut..
  • High quality 304 stainless steel. Sturdy and firm, resistant to rust and corrosion. Concrete anchor and masonry anchor , easy to be mounted..
  • Widely used in fence,burglarproof doors and window,canopy,air conditioning rach fixation,home decoration,engineering,etc..
  • If the wall is built by relatively soft brick , it may need to make the hole which is 1mm smaller than the suggested..
  • Air brick, foam concrete block,are not suitable for these expansion bolts..
Check Stock

Klein Tools 630M 3\ Hollow Shank Magnetic Tip Nut Driver Set (2 Pieces)

  • Nut Drivers' hollow shaft design with Rare-Earth magnetic tip facilitates work on bolt applications.
  • Tool Set contains: 1/4-Inch (630-1/4M) and 5/16-Inch (630-5/16M) hex sized nut drivers.
  • Cushion-Grip handle allows for greater torque and comfort and handle end is color coded for easy identification.
  • Internal flanges provide solid, twist-resistant shaft anchor.
Check Stock

Squeak Ender 2084 Hardwood Floor / Subfloor Squeak Eliminator Brackets - Quantity 4

  • Quantity of (4) : Squeak Ender Floor Squeak Eliminator Brackets # 2084.
  • Quickly and permanently eliminate annoying wood floor squeaks.
  • This kit installs from beneath the floor and works by pulling the loose sub-floor tight to the joist ..
  • Each Kit Includes (1) 4″ adjustable floor joist bracket, (1) 2″ square floor anchor plate, (1) 1/4-20 x 6 inch carriage bolt, (1) 1/4-20 hex nut, (1) 1/4 washer and (4) #10 x 5/8″ sub-floor wood screws.
Check Stock

Squeak Ender 2084 Hardwood Floor / Subfloor Squeak Eliminator Brackets - Quantity 6

  • Quantity of (6) : Squeak Ender Floor Squeak Eliminator Brackets # 2084.
  • Quickly and permanently eliminate annoying wood floor squeaks.
  • This kit installs from beneath the floor and works by pulling the loose sub-floor tight to the joist ..
  • Each Kit Includes (1) 4" adjustable floor joist bracket, (1) 2" square floor anchor plate, (1) 1/4-20 x 6 inch carriage bolt, (1) 1/4-20 hex nut, (1) 1/4 washer and (4) #10 x 5/8" sub-floor wood screws.
Check Stock

Squeak Ender 2084 Hardwood Floor / Subfloor Squeak Eliminator Brackets - Quantity 24

  • Quantity of (24) : Squeak Ender Floor Squeak Eliminator Brackets # 2084.
  • Quickly and permanently eliminate annoying wood floor squeaks.
  • This kit installs from beneath the floor and works by pulling the loose sub-floor tight to the joist ..
  • Each Kit Includes (1) 4" adjustable floor joist bracket, (1) 2" square floor anchor plate, (1) 1/4-20 x 6 inch carriage bolt, (1) 1/4-20 hex nut, (1) 1/4 washer and (4) #10 x 5/8" sub-floor wood screws.
Check Stock

Squeak Ender 2084 Hardwood Floor/Subfloor Squeak Eliminator Brackets - Quantity 13

  • Quantity of (13) : Squeak Ender Floor Squeak Eliminator Brackets # 2084.
  • Quickly and permanently eliminate annoying wood floor squeaks.
  • This kit installs from beneath the floor and works by pulling the loose sub-floor tight to the joist ..
  • Each Kit Includes (1) 4" adjustable floor joist bracket, (1) 2" square floor anchor plate, (1) 1/4-20 x 6 inch carriage bolt, (1) 1/4-20 hex nut, (1) 1/4 washer and (4) #10 x 5/8" sub-floor wood screws.
Check Stock

Squeak Ender 2084 Hardwood Floor/Subfloor Squeak Eliminator Brackets - Quantity 9

  • Quantity of (9) : Squeak Ender Floor Squeak Eliminator Brackets # 2084.
  • Quickly and permanently eliminate annoying wood floor squeaks.
  • This kit installs from beneath the floor and works by pulling the loose sub-floor tight to the joist ..
  • Each Kit Includes (1) 4" adjustable floor joist bracket, (1) 2" square floor anchor plate, (1) 1/4-20 x 6 inch carriage bolt, (1) 1/4-20 hex nut, (1) 1/4 washer and (4) #10 x 5/8" sub-floor wood screws.
Check Stock

Ironwood Pacific AnchorLift Anchor Puller for River and Lake Anchoring, Floats up to 80 lbs

  • FLOAT YOUR ANCHOR OR CRAB TRAP TO THE SURFACE - The AnchorLift Anchor Puller easily floats anchors, crab traps, and lobster pots up to 80 lbs..
  • EASY-TO-USE ANCHOR RETRIEVAL SYSTEM - Slide the AnchorLift over the anchor line, tie off to a cleat and let the anchor out by holding the sliding bolt in the up position. When anchored toss the AnchorLift with buoy into the water. To raise your anchor motor your boat forward to float the anchor to the surface..
  • IDEAL FOR ANCHORING IN RIVERS AND LAKES - Use in place of a winch or windlass. Sliding stainless steel bolt grabs line and locks anchor at water's surface. Designed for use with anchor lines 3/8" to 5/8" in diameter..
  • QUALITY CONSTRUCTION - Made from marine grade nylon with stainless steel at all wear points. For extra heavy-duty use, consider our anodized aluminum AnchorLift Pro model. (Link in description below)..
  • MADE IN THE USA - The AnchorLift Anchor Puller and Polyform buoy are made in the USA and backed by a limited lifetime warranty..
Check Stock

CONFAST 5/8\ Lag Shield Anchor Long (25 per Box)

  • READILY ACCEPTS MACHINE BOLTS-Any coarse threaded bolt can be used.
  • INTERNAL THREADS-Bolt can be removed easily.
  • BOLT EXPANDS ANCHOR-No need for setting tools.
  • CAN BE INSTALLED IN CONCRETE, BRICK OR BLOCK-Versatile anchor for most masonry applications.
Check Stock

50 Pcs 3/8 x 3 Zinc Plated Concrete Anchors Masonry Screws Heavy Duty Carbon Steel Concrete Anchors and Screws Kit Hex Head Large Diameter Concrete Anchor Bolts for Brick Blocks Cement

  • Adequate Quantity: there are 50 pieces of concrete anchors, suitable for large volume work, meeting your daily needs, and can also be shared with your family and friends.
  • Pocket Size: each of concrete screws and anchors is about 3/8" x 3", and weighs only 1.3 ounce/ 37 g, fine workmanship, and easy to carry around, providing you with much convenience.
  • Quality and Sturdy Material: hex concrete anchors are made of carbon steel, with galvanized surface to resist rust, and feature higher hardness, hard and not easy to deform, especially practical for dry environment.
  • Novel Design: featuring low torque threads, masonry screws have deep and clear threads, which can make concrete penetration easily, and also simple to install.
  • The anchor has a finished hex washer head with anti rotation serrations to keep the anchor away from backing out.
  • Wide Range of Applications: hex head concrete screw anchor is mainly designed for concrete, masonry, brick or block.
  • Note that using a standard drill bit for installation, the drill bit size is the same as the anchor diameter.
Check Stock

1/4\ x 3/4\ Stainless Steel Hex Bolts, (100pcs), 18-8 (304) S/S, by Bolt Dropper.

  • ã€High Quality Stainless Steel】Bolt Dropper Hex Bolts are 100% 18-8 (304) Stainless Steel giving them one of the highest forms of corrosion resistance. This makes them the perfect choice for use in any environment (including marine/saltwater).
  • ã€Bolts You Can Depend On】Our Hex Head Bolts are very strong and are great for both indoor and outdoor use. Whether you are attaching a piling to a saltwater dock or securing a swing set, you can depend on Bolt Dropper Hex bolts to hold and last..
  • ã€Great To Keep Around】Bolt Dropper Hex bolts are great to have around for when you need them most! Use in any application, any condition, and any environment! Bolt Dropper bolts are the highest quality available on the market and we stand by our claim 100%. They are strong, corrosion-resistant, and long-lasting!.
  • ã€Dimensions】Diameter: 1/4" | Length: 3/4" | Thread Type: 20 tpi Coarse Thread (Standard) | Quantity: 100 pcs| Material: 18-8 (304) Stainless Steel..
  • ã€Lifetime Guarantee】We are so confident that our product is the best on the market that we offer a No Hassle Lifetime Guarantee..
Check Stock