Mophorn Helm Outboard Hydraulic Steering Pump 300 HP Hydraulic Pump HH5271-3 for Cruisers Runabouts Boats
- Front Mount Pump: This helm is ideal for cruisers, runabouts, center console boats, offshore fishing boats and many more. It is also suitable for speeds up to 60 MPH. The helm allows you to install all of the reliability and comfort of hydraulic steering onto your boat. Get ready to take your boat to the next level..
- 1.7 Hydraulic Helm: Our front mount 1.7 hydraulic helm provides smooth and efficient no feedback steering for single and multi-outboard engines up to 300 HP (600 HP combined for counter rotating twins) for speeds up to 60 MPH. 4.9 turns lock-to-lock in most typical single cylinder outboard applications..
- Shaft Seal & ORB Fitting: The pump has a shaft seal that can be easily replaced, this is a user-friendly design for your use. And the positionable stainless steel O-Ring (ORB) fittings for easy hose routing..
- Built-in Two-way Lock: The hydraulic helm pump is equipped with the replaceable shaft seal, built-in lock valve, relieve valve, and air pocket. These details make it convenient for you to use..
- Sturdy Aluminum Alloy: The hydraulic steering helm is made from a high-strength aluminum alloy material, which is corrosion-resistant, and high-density to effectively prevent seawater erosion. Constant seasonal replacements will no longer be....
Check StockSeaDek 5mm Foam | Embossed Anti- Fatigue Helm Station Pad | Non Slip Boat Standing Mat | 3M Adhesive Backing Aqua Camo Large
- SeaDek FOAM: Enjoy the quality that you've come to know and love with our authentic Seadek Foam helm pad..
- NON SKID SURFACE- Our Embossed pattern is made from closed-cell PE/EVA blended foam material. SeaDek Helm Station Pads provide the utmost comfort....
- COMFORT: Our 5mm shock absorbing mat is designed for comfort. Do your knees and feet a favor on your long drives and buy a SeaDek helm Pad..
- EASY APPLICATION: Each helm pad features a 3M adhesive backing. Clean the desired surface, and then peel and stick..
Check StockWise 8WD115-1012 Deluxe Pontoon Steering Console, Grey/Red/Charcoal
- Deluxe Series Steering Console with 2 Cup Holders.
- Helm/Console Dimensions - Height: 29.25", Width: 26", Depth: 18".
- Injection Molded Plastic Construction, Marine Grade Vinyl.
- Reinforced Helm Dash Panel ready for custom installation of steering helm mechanism and gauge cluster.
Check StockBennett FO4322 Complete Kit Bolt Electric Trim Tab BOLT129 with Integrated Helm Control OBI9000E 12 x 9 inches
- FEATURES BENNETT BOLT Trim Tab (BOLT129) BENETT BOLT Control with NEW 2020 Integrated Helm Control (OBI9000E) COMPATIBILITY: Boats up to 22 ft long.
- TWO (2) Stainless steel trim planes (tabs) and mounting plates (12 x 9 inches) / TWO (2) 20ft. harnesses with waterproof connectors (BAW2020) / BENETT....
- TWO (2) 12-volt actuators with 6ft. wire harnesses and waterproof connectors (BEA3000) / Mounting Hardware Included.
- The NEW 2020 Integrated Helm Control is Attractive and user-friendly, stand-alone helm control without the need for an external control unit as was in....
- The functionality and "brains" of the Integrated Helm control unit are engineered directly into a single, space-saving, and simple-to-install keypad.....
Check StockSeaDek 5mm Foam | Embossed Anti- Fatigue Helm Station Pad | Non Slip Boat Standing Mat | 3M Adhesive Backing Cool Gray Large
- SeaDek FOAM: Enjoy the quality that you've come to know and love with our authentic Seadek Foam helm pad..
- NON SKID SURFACE: Our brushed pattern is made from closed-cell PE/EVA blended foam material. SeaDek Helm Station Pads provide the utmost comfort while....
- COMFORT: Our softest, most comfortable SeaDek pad featuring an ultra-comfortable low-density 17mm foundation with our legendary standard 3mm top layer....
- EASY APPLICATION: Each helm pad features a 3M adhesive backing. Clean the desired surface, and then peel and stick..
Check StockSeaDek Pad | Realtree Helm Pads | Anti-Fatigue | Anti Slip | 20mm Thickness | Brushed Texture | Storm Gray/Black - Timber Pattern Large
- SeaDek FOAM: Enjoy the quality that you've come to know and love with our authentic Seadek Foam helm pad..
- NON SKID SURFACE: Our brushed pattern is made from closed-cell PE/EVA blended foam material. SeaDek Helm Station Pads provide the utmost comfort while....
- COMFORT: Our softest, most comfortable SeaDek pad featuring an ultra-comfortable low-density 17mm foundation with our legendary standard 3mm top layer....
- EASY APPLICATION: Each helm pad features a 3M adhesive backing. Clean the desired surface, and then peel and stick..
Check StockSeaDek Pad | Dual Density Helm Pads | Anti-Fatigue | Anti Slip | 20mm Thickness | Brushed Texture | Storm Gray Over Black Large
- SeaDek FOAM: Enjoy the quality that you've come to know and love with our authentic Seadek Foam helm pad..
- NON SKID SURFACE: Our brushed pattern is made from closed-cell PE/EVA blended foam material. SeaDek Helm Station Pads provide the utmost comfort while....
- COMFORT: Our softest, most comfortable SeaDek pad featuring an ultra-comfortable low-density 17mm foundation with our legendary standard 3mm top layer....
- EASY APPLICATION: Each helm pad features a 3M adhesive backing. Clean the desired surface, and then peel and stick..
Check StockWEEMS & PLATH Man Overboard Wheel
- 1. Turn dial on wheel to match vessel’s current heading..
- 2. Turn helm hard to port until compass heading has changed 60 degrees. See B on device for compass position that matches this 60 degree turn..
- 3. Turn helm hard to starboard to come around 240 degrees to reach reciprocal course as indicated at C on tool..
- 4. When vessel reaches reciprocal heading, straighten helm. This will bring the vessel back onto its original wake, traveling in the opposite direction..
- 5. Slow down and look for man overboard. Follow steps indicated for recovery on wheel..
Check StockDometic SeaStar Classic Tilt Hydraulic Steering Kit, HK6400TC-3
- Hydraulic Steering Kit without hoses (ordered separately ho51xx where xx equals hose length in feet).
- Updated System includes Positionable Stainless Steel O-Ring (ORB) Fittings for easy hose routing and NEW End Gland Sealing System for maximum protection from saltwater and compression set.
- 5 turns lock-to-lock with 1.7 Cubic Inch Displacement Helm (included) for maximum steering comfort.
- Robust Barrel design and NEW graphics compliment new boats and motor packages..
- 48 Degrees of Tilt Articulation, 5 Positive Lock Positions and Factory Installed Lubrication ensure Smooth Operation and Feel.
Check StockDometic SeaStar 1.7 Helm, HH5271-3, Front Mount
- Convenient front of dash fill which can be retrofitted into an old SeaStar 4.5" hole cutout.
- Positionable Stainless Steel O-Ring (ORB) Fittings for easy hose routing.
- Compact helm has only a 4-7/16" footprint and needs only a 3” dash hole.
- 4.9 turns lock-to-lock in most typical single cylinder outboard applications.
- INSTALLATION NOTE: Do NOT attempt to install an NPT pipe fitting into a -3 helm hose fitting port. Doing so will lead to irreparable damage to the helm.
Check StockCastaway Customs | SeaDek 13mm Foam | Teak Anti- Fatigue Helm Station Pad | Non Slip Boat Standing Mat | 3M Adhesive Backing (Mocha/Black, Large)
- SeaDek FOAM: Enjoy the quality that you've come to know and love with our authentic Seadek Foam helm pad..
- NON SKID SURFACE: Our Teak pattern is made from closed-cell PE/EVA blended foam material. SeaDek Helm Station Pads provide the utmost comfort while standing for long hours on the water..
- COMFORT: Our 13mm shock absorbing mat is designed for comfort. Do your knees and feet a favor on your long drives and buy a SeaDek helm Pad..
- EASY APPLICATION: Each helm pad features a 3M adhesive backing. Clean the desired surface, and then peel and stick..
- EASY TO CLEAN: Our durable foam allows these pads to be wiped down and cleaned easily for continued use. These UV protected bolsters are also stain and fade resistant..
Check StockTrackStar Turnigy 13.5T Sensored Brushless Motor 3040KV Roar Approved
- Premium Material: The hydraulic steering helm comes with high-strength aluminum alloy material, which is lightweight, anti-aging, corrosion-resistant,....
- Optimal Hose Fitting: The adjustable stainless steel O-ring fittings will simplify the installation process and allow for simple reorientation after....
- Considerate Details: The hydraulic helm pump is equipped with the replaceable shaft seal, the built-in lock valve, relieve valve, and air pocket.....
- Complete Accessories: The hydraulic steering pump has a complete accessories kit for durable structure. It includes ball bearing piston race,-5 ORB....
- Wide Application: This outboard helm pump is suitable for boats rated to a maximum of 300 HP. It can be used in mechanical/manual steering for yachts,....
Check StockTeBaisea Universal Boat T-Top Center Console Cover, Polyester Fabric Protective Cover,Trailerable (84' L 51' W 71' H)
- T-Top Console Cover 100% polyester fabric,UV Resistant, Breathable and weather proof.
- Can enclose any size console, helm seat and T-Top support combination with a maximum base perimeter (at the deck) of 20' or less.
- Elasticised band across helm seat, top and bottom of the cover ensure a snug fit,Heavy duty marine grade zipper allows easy installation and removal,Adjustable straps allow the cover to conform to most console configurations..
- Secured to the underside of the fixed T-Top structureBoats with smaller consoles and T-Tops can also cover and protect the helm seats.
- Please measure the fitting space before you purchase.
Check Stock
