Reviews Helical Gearbox

Powermatic 15HH, 15-Inch Planer, Helical Head, 3HP, 1Ph 230V (1791213)

  • HELICAL CUTTERHEAD WITH 74 FOUR-SIDED CARBIDE INSERTS: Smoother, quieter cutting and finer finish than conventional knives..
  • ANGLED DUST CHUTE WITH 4" PORT: Provides efficient chip and dust collection..
  • THREE V-BELTS: Transfer maximum power to the cutterhead..
  • TWO-SPEED GEARBOX: Features an automatic chain tensioner..
  • LARGE, CAST IRON HANDWHEEL: Positions table quickly and easily..
Check Stock

Powermatic 209HH, 20-Inch Planer, Helical Cutterhead, 5HP, 3Ph 230/460V (1791316)

  • TWO-SPEED OIL BATH GEARBOX: Transmits full power to feed rollers and facilitates fast speed changes at 24 and 31 FPM..
  • HELICAL CUTTERHEAD WITH 100 FOUR-SIDED CARBIDE INSERTS: Smoother, quieter cutting and finer finish than conventional knives..
  • DUST CHUTE WITH 5" PORT: Provides efficient chip and dust collection..
  • CHIP BREAKER AND PRESSURE BAR: Assists to reduce snipe..
Check Stock

JET JWP-208-1, 20-Inch Planer, 4 HSS Knives, 3HP, 1Ph 230V (708528)

  • TWO-SPEED OIL BATH GEARBOX: Transmits full power to feed rollers and facilitates fast speed changes at 24 and 31 FPM..
  • HELICAL CUTTERHEAD WITH 100 FOUR-SIDED CARBIDE INSERTS: Smoother, quieter cutting and finer finish than conventional knives..
  • DUST CHUTE WITH 5" PORT: Provides efficient chip and dust collection..
  • CHIP BREAKER AND PRESSURE BAR: Assists to reduce snipe..
Check Stock

Powermatic 201HH, 22-Inch Planer, Helical Head, 7.5HP, 1Ph 230V (1791267)

  • HELICAL CUTTERHEAD WITH 125 FOUR-SIDED CARBIDE INSERTS: Smoother, quieter cutting and finer finish than conventional knives..
  • accommodates rough and fine finish work..
  • INFEED ROLLER AND CHIP BREAKER: Specially designed to allow multiple boards to be planed at the same..
  • DUST CHUTE WITH 5" PORT: Provides efficient chip and dust collection..
  • ROLLER BEARING-MOUNTED FEED ROLLERS: For smooth operation and long life..
Check Stock

Powermatic 201HH, 22-Inch Planer, Helical Head, 7-1/2HP, 3Ph 230V (1791268)

  • HELICAL CUTTERHEAD WITH 125 FOUR-SIDED CARBIDE INSERTS: Smoother, quieter cutting and finer finish than conventional knives..
  • accommodates rough and fine finish work..
  • INFEED ROLLER AND CHIP BREAKER: Specially designed to allow multiple boards to be planed at the same..
  • DUST CHUTE WITH 5" PORT: Provides efficient chip and dust collection..
  • ROLLER BEARING-MOUNTED FEED ROLLERS: For smooth operation and long life..
Check Stock

SVBONY SV106 Guide Scope with Helical Focuser Finder and Guide Scope Multi-Use for Astronomical Telescope 50mm

  • 50mm Guide scope will help guide you to capturing higher quality astrophotos. with its 50mm lens and smooth helical focuser, the versatile 50mm multi-use guide scope with helical focuser is an ideal addition to any astrophotographers collection of gear.
  • Multi-use guide scope with helical focuser features a built-in helical focuser that allows precise focus adjustments with zero flexure for rigid performance. obtaining a clear, sharply focused view of potential guide stars is quick and easy with this sturdy scope.
  • High power guide scope features a machined, knurled ring to make fine focus adjustments nice and easy, while a thumbscrew lets you lock-down the focuser in-place once adjustments are complete. the focuser boasts 8 mm of precise helical focus travel, plus telescoping drawtube housing provides up to 30 mm of additional back-travel if needed for your particular autoguider device.
  • This complete guide scope comes with two heavy-duty guide scope rings and a 3.5" long, 1.18"wide dovetail mounting bar, which is compatible with dovetail finder scope bases for easy attachment. the dovetail bar features five threaded through-sockets for versatile attachment options. the included guide scope rings feature six metal thumbscrews for precise aiming.
Check Stock

labwork Go Kart Forward Reverse Gearbox Kit Replacement for 2HP-13HP Engine Local 30 Series 2300rpm 4 Stroke 30 Series Torque Converter 35 Chain Go Karts Accessories 212cc Gearbox

  • Go Kart Forward Reverse Gearbox Kit Replacement for 2HP-13HP Engine Local 30 Series 2300rpm..
  • Replacement for 2HP-13HP Engine 4 Stroke Forward Reverse Gearbox 30 Series Torque Converter 35 Chain Go Karts Accessories 212cc Gearbox..
  • Easy to install: This go-kart forward reverse gearbox is easy to install, suitable for people who like DIY assembly of karts, just follow the operation to complete the installation and use..
  • This go-kart reverse kit is made of high-quality metal with guaranteed quality..
  • Package includes: 1 x gearbox with 3/16 keyway, 1 x gear lever assembly, 1 x gearshift disc, 2 x transmission lines, 2 x sprocket wheels, and 2 x mounting plates..
Check Stock

Upgraded Helical Cutterhead for 13' DeWalt Planer DW735 DW735X Planer

  • UPGRADED CUTTERHEAD-The TJATSE 13" Helical Cutterhead is designed to replace the straight knife cutterhead on the DeWalt DW735 and DW735X Planers. Takes the performance of your Dewalt planer to the next level and cuts smoothly through your wood planing projects with ease..
  • CUT IMPROVEMENT-Helical cutter head features smaller which contact the wood and an angle shearing the fibers rather than tearing at them, the cutting performance is excellent and the slight bit of snipe that was getting with the straight knives is completely gone, the wood surface would be so much smoother..
  • AMAZING NOISE REDUCTION-The biggest difference of helical cutterhead is the noise reduction, the section cutting process makes the wood chips very fine, then the chip removal is easier. Energy saving and power saving, while reducing tear out more effectively than conventional straight-knife cutterheads..
  • LONG-TERM COST SAVING-56 Indexable carbide inserts included to produce a superior finish. Indexable carbide inserts are less prone to nicks and cracks over conventional HSS knives and 10 times longer than. If an insert dulls or gets nicked, simply rotate it to expose a new sharp edge or easily replaced, No need to take out all the blades, reduces shop down-time and cost savin....
Check Stock

Mophorn Go Kart Forward Reverse Gear Box 10T #40/41 12T #35 Go Karts Accessories TAV2 30 40 41 For 2HP-7HP Engine Transmission Local Honor 3 Shift Modes ONLY Works with 30 Series Torque Converter

  • Structural Parameters: Gearbox Shaft Size: 5/8".
  • Quality Metal: This go-kart gearbox is made of high-quality metal, wear-resistant and lightweight. It provides precise torque and a long lifetime..
  • Three Shift Modes: Our go-kart gearbox kit has three shift modes: forward, reverse, and neutral. It allows for convenient and easy operation..
  • Complete Accessories: This go-kart transmission kit includes 1 x forward / reverse gearbox with 3/16" keyway, 1 x gear lever assembly, 1 x gearshift....
  • High Adaptability: This 30 Series forward reverse gearbox is suitable for # 35 chain 12T and #40/41/420 chain 10T go-karts, dune buggies, UTV, and....
Check Stock

PHYNEDI Manual 8 Speed Gearbox Transmission Bricks Model Compatible with Lego, MOC DIY Small Particle Construction Collection Building Toy for Adult, Genuine Authorization MOC-79482 (685 Pieces)

  • Exquisite Detail: MOC-79482 was licensed and designed by TechnicBrickPower. This is an 8-speed manual gearbox. The gearbox ratio is very close to the real 488 GTE gearbox ratio, except that it uses a manual 8-speed gearbox instead of an automatic 8-speed gearbox..
  • PDF electronic manual: There are 685-piece bricks in total. With Electric PDF manual stored in U-disk to help you assemble easily. It can be a cool new model added as new set for your collection. After the building blocks are assembled, it is an excellent ornament. It can be used as a background decoration. The assembly process feels the mystery of learning mechanical engineering. Make the overall experience better.
  • Compatible with All Major Brands: Designed in accordance with universal standards, Our building bricks are compatible with your existing name brand building toys. All parts are easy to put together and dont fall apart, which is strong expandability..
  • Safe & High Quality Materials: All our building bricks set are made of high quality ABS material with high safety level. Precision casting processing molding, no smelling, smooth. Easy to remove. With exquisite color box packaging, it is extremely suitable for gift giving, especially for birthday parties, Christmas, Thanksgiving, back....
Check Stock

10:1 Planetary Gearbox 1/2\(12.7mm) Input Shaft for Nema 34 Stepper Motor 3000RPM Gearhead Gear Reducer CNC Benchtop Lathe Machine (10:1)

  • 1/2" (12.7mm) Input Shaft , connect directly with motors which has 12.7mm shaft.
  • Rated 30Nm high torque planetary gearbox ,10:1 speed reduction.
  • Nema34 flang, the gearbox must be screwed on the motor with the offer 4pcs screw to keep the concentricity. Very easy to install on motors, gearbox output shaft keyway dimension 5*5*25mm.
  • Rated speed is 3000RPM, precision less than 25 Arcmin.
  • This nema34 planetary gearbox mainly matches the stepper motor to reduce speed and increase torque. Widely used in CNC field on mill,lathe,bench,packaging machine etc..
Check Stock

AME Lock Out Tag Out Kit Earthmover 36400

  • Function: Gearbox Mainshaft Nut Tool is designed to accept a 1/2" drive wrench or a 30mm AF socket/spanner, This tool is used for tightening up the mainshaft nut on the end of the gearbox output shaft to a torque of 85lbf..
  • Operation: This is to ensure the best engagement between the teeth on the tool and the spindle lock nut.
  • it is common to find the spindle lock nut that has been tightened with a hammer and chisel..
  • Contains: 1 × Gearbox Mainshaft Nut Tool (Equivalent to OEM 600300). This nut Fit For Land Rover Series vehicles with the factory fitted gearbox.
  • Material: They are precision manufactured from toughened steel and zinc plated to ensure they last for years. EN24T Steel gives the tool high tensile strength, shock resistance, good ductility and resistance to wear..
  • Service: ZKTOOL is committed to providing the best professional tools and best service for auto repair. If you have any questions, please contact us. We provide 24-hour before and after sales servic.
Check Stock

WAKAKAC 1/32 Toy Car for Honda Civic Type-R Diecast Toy Vehicle Metal Pull Back Model Car with Light and Sound for Kids and Adults

  • 12V Gearbox and Motor Left&Right for Motion Trendz Action Wheels.
  • Motor Type - 12V 12000RPM Electric Motor and Gearbox With Wires.
  • Compatibility - Perfect Fit For A Wide Variety Of Action Wheels Motion Trendz Ride On Applications Including Motion Trendz Yamaha Raptor 700R ATV HONDA TALON UTV Disney Frozen Sleigh..
  • Quality Assurance - Crafted Wtih A Rugged Construction, Our Gearbox Are Ultra Durable.
  • User Friendly - Easy, One-Time Installation Of Our All New Gearbox Will Get Your Ride On Running In No Time At All..
Check Stock