Reviews Height Gauge

Antenna Rotator W/Remote

  • 20' 9" assembled height. Collapses to a convenient 5' for shipping and storage..
  • Bottom: 2-1/4" OD x 18 Gauge 2nd Section: 2" OD x 18 Gauge 3rd Section: 1-3/4" OD x 18 Gauge.
  • 4th Section: 1-1/2" OD x 18 Gauge Top: 1-1/4" OD x 16 Gauge (Mast is overlapped for added strength).
  • Features guy rings that rotate and a heavy duty thumbscrew/collar system for setting height.
  • All installations must be guyed or bracketed and installed by an experienced professional. Installation instructions are not included by the manufacturer..
Check Stock

JMBay Rain Gauge, Freeze Proof rain Gauge Outdoor Best Rated, Rain gauges for Yard with Stake, Decorative rain Measure Gauge for Garden, Deck, Lawn with Large Numbers, Adjustable Height

  • ...metal strips (patented design) at the rear of the tube to make the water in the rain gauge blue, effectively avoiding the problem of unclear water level and scale caused by reflection or transparency. These two designs can make the rain gauge easier to read..
  • 【Adjustable Height】This rain gauge outdoors best rated adopts a three-section design, and the overall height reaches 29 inches.
  • You can also remove the middle section and adjust it to a height of 19 inches to meet your different needs. The height of 29inch is higher than other glass rain gauges on the market, so it is not easy to be covered by flowers and grass, and there is no need to squat down to read..
  • 【Easy to Install and Use】Just connect the three pieces of metal to complete the installation of rain guage for yard, no specialized skills are required. Sturdy rain gauge outdoor that will easily insert into the ground with self leveling foot step. The rain gauge tube inside is easy to take out, which is convenient to check the collected rainwater and empty the rain gauge replacement tube, so as to prepare for the next rainfall. The operation is simple and will not be dirty..
Check Stock

15 Pieces Guitar Luthier Tools Set Including Guitar Radius Gauge, String Action Ruler Gauge, 32 Blades Feeler Gauge, Guitar Notched Radius Gauges for Guitar and Bass Setup

  • Quality material: these guitar gauge set is made of stainless steel with rounded off edge, rustproof and corrosion-resistant, won't scratch or hurt your hands, durable for long-term use.
  • Foldable feeler gauge: the feeler gauge applies tempered steel, measurement ranges from 0.0015 inch/ 0.038 mm to 0.035 inch/ 0.889 mm, a common distance measuring tool for guitar spacing , the chrome plated main shaft makes it easy to clean up.
  • Understring radius gauge: comes in 9 sizes: 7.25 inch, 9.5 inch, 10 inch, 12 inch, 14 inch, 15 inch, 16 inch, 17 inch, 20 inch.
  • String action gauge ruler: the pocket-sized gauge ruler is marked with metric and imperial scale respectively on 2 sides, can be applied to measure string height, bridge saddle height, saddle slot depth, pickup polepiece height, fret slot depth and nut height.
  • Notched radius gauge: includes 2 narrow radius gauges and 2 wide radius gauges in 7.25 inch, 9.5 inch, 10 inch, 12 inch, 14 inch, 15 inch, 16 inch, 20 inch radius, stays parallel to the fingerboard, quickly and accurately find the curvature of a fingerboard or bridge with these radius gauges without taking the strings off.
Check Stock

Easy Up 33 2 Telescoping Mast - TV WIFI HAM Antenna - EZ TM-50-U-95

  • 33' 2" assembled height. Collapses length: 95".
  • Bottom: 2-1/4" OD x 18 Gauge x 74" Long. 2nd Section: 2" OD x 18 Gauge x 80" Long. 3rd Section: 1-3/4" OD x 18 Gauge x 86" Long.
  • 4th Section: 1-1/2" OD x 18 Gauge x 92". Long Top: 1-1/4" OD x 16 Gauge x 94" Long.
  • Features guy rings that rotate and a heavy duty thumbscrew/collar system for setting height.
Check Stock

Easy Up 20' 9' Telescoping Mast -TV WiFi HAM Antenna Push Up Pole (Collapses to 5')

  • 20' 9" assembled height. Collapses to a convenient 5' for shipping and storage..
  • Bottom: 2-1/4" OD x 18 Gauge 2nd Section: 2" OD x 18 Gauge 3rd Section: 1-3/4" OD x 18 Gauge.
  • 4th Section: 1-1/2" OD x 18 Gauge Top: 1-1/4" OD x 16 Gauge (Mast is overlapped for added strength).
  • Features guy rings that rotate and a heavy duty thumbscrew/collar system for setting height.
  • All installations must be guyed or bracketed and installed by an experienced professional. Installation instructions are not included by the manufacturer..
Check Stock

XtremeAmazing 5mm Guitar Truss Rod Ball End Long Allen Adjustment Wrench with String Action Gauge Ruler Luthier Tool for Martin Acoustic Guitar Bass

  • 5mm Neck wrench specialized to the adjusting hole of the guitar neck relatively deep.
  • The gauge provides accurate measurement to string height, bridge saddle height, saddle slot depth, pickup polepiece height, nut height..
  • Suitable for string instruments such as guitar, bass, mandolin, banjo and more.Package Contents:1 x 5mm Guitar Truss Rod Ball Allen Wrench, 1 x String Action Gauge Tool.
  • Package Contents:1 x 5mm Guitar Truss Rod Ball Allen Wrench, 1 x String Action Gauge Tool.
Check Stock

Sike MR-210 Professional Aluminum Telescopic Height Measuring Rod, Wall Mounted Stadiometer

  • Heavy gauge aluminum. For adult or pediatric patients..
  • Precision engineered and constructed of heavy gauge aluminum, the SIKE MR-210 Mechanical Height Rod will deliver accurate height readings for years and years.
  • Flip the measurement arm up and slide the height measurement arm into position.
  • The patient’s height is highlighted with an easy-to-read, bright red line.
Check Stock

Baroque String Action Gauge Precise Guitar Ruler Set Up Tool Kit for Electric Bass and Acoustic Guitar

  • Multifunctional -An all in one tool for measuring string height, bridge saddle height, saddle slot depth, fret slot depth and nut height. It is a neat and helpful tool for a guitar player to fix your guitar's play-ability by getting the height of your bridge and strings just right..
  • Super precise string action gauge-Scale for string height: 0.01-0.14in / 0.25-3.50mm.Scale for bridge saddle slot depth: 0-0.875in / 0-20mm.Scale for nuts saddles and polepiece: 0-0.75in / 0-20mm..
  • It is made of high strength stainless steel, very durable.All the markings are actually ETCHED into the ruler so it will not wear off from long time use..
  • With recommended measurements for electric, acoustic and bass guitar at the 12th fret printed on the back of the gauge,very clearly to read..
  • It have inches and metric on the same gauge.Pocket size just like a business card..
Check Stock

Proster 200mm 360°Angle Finder Data Hold LCD Angle Ruler One Key Zeroing 80mm 3 1/8\ Magnetic Height Gauge Depth Gauge for Woodworking Construction Home Decoration

  • 【Accurate Angle Finder】200mm stainless steel ruler to measure length (metric and imperial), 360°angle sensor for relative and absolute angle measurement inside and outside, Range:0-360°,Resolution：0.05°,Accuracy：±0.3°,Repeatability：0.05°..
  • 【One-key Data Hold & Zero Reseting】Knob locked one-key data hold function for both angle/depth gauge to hold the angles/depth measured at any time.
  • Zeroing reset button at any angle for relative measuring..
  • 【Multi-function Magnetic Height Gauge】3-In-1 Height/Depth/Thickness Gauge,easy to measure bore/slot depths with plunger, one key mm/inch/fraction switch, range: 80mm, resolution: 0.05mm, accuracy: 0.10mm for routers horizontal/vertical measure with self standing magnetic feet..
  • 【LCD Display & Stainless Steel】Sturdy plastic thickness gauge for with quick-reading digital LCD display, harden stainless steel angle finder ruler and depth ruler provides lifelong service..
  • 【Wide Applicatoion】This angle finder with magnetic height depth thickness gauge is especially designed for Woodworking, Construction, Home Decoration, Table saws, Hand Routers, Etc..
Check Stock

EASY-UP Easy Up 27' 7'' Telescoping Mast - TV WiFi HAM Antenna Push Up Pole - EZ TM-40-U-95

  • Assembled height is 27'-7" when fully extended. Perfect for mounting antennas, security cameras, and more..
  • Bottom Section: 2" OD - 18 Gauge. 2nd Section: 1-3/4" OD - 18 Gauge. 3rd Section: 1-1/2" OD - 18 Gauge. Top Section: 1-1/4" OD - 16 Gauge.
  • Features rotating guy rings and a heavy duty thumbscrew/collar system for setting height..
  • All installations must be guyed or bracketed and installed by an experienced professional..
Check Stock

Weigh Safe Fixed Height Ball Mount WSFH2-2-01, 2\ Drop & 2\ Receiver, 10,000lbs GTW, 1,500lbs Tongue Weight - Built-in Tongue Weight Gauge & Includes 2\ Stainless Steel Tow Ball

  • ...ght measurement every time you couple your trailer. This eliminates the need to purchase additional tongue weight scales, which can cost you hundreds of dollars, and increases the speed at which you properly set up your trailer..
  • ACCURACY & MEASUREMENTS: The Stainless Steel Tongue Weight Hydraulic Gauge of the fixed height ball mount is designed to have industry leading accuracy. The Stainless Steel Coil is protected by a Strengthened PolyCarbonate Lense allowing us to guarantee an accuracy of within 30 LBS. All of our Weigh Safe scales come standard with a LIMITED LIFETIME WARRANTY. We will repair your gauge at no cost for the life of the ball mount..
  • HEAVY-DUTY TOWING CAPACITY: Made of 5 lbs. of solid aircraft grade billet aluminum, this ball mount is as tough as they come. The Weigh Safe Fixed Height Ball Mount boasts a towing capacity (GTW) of 10,000 lbs. & a 1,500 lbs. max tongue capacity. The Industry Leading strength is due to our Superior Materials and in-house developed manufacturing processes. Not only are our products designed to bring you Towing Peace of Mind, but the durability and strength you need to get the job done..
  • UNIVERSAL APPLICATION: This Fixed Height Mount is designed to function with any 2" receiver found on most SUV's and Half-....
Check Stock

MIECOO 19PCS Guitar Repair Tool Kit with 8 Inch Guitar Fret Leveling Beam 9 Understring Radius Gauge Fret Crowning File String Action Ruler Gauge Fretboard Guard Screwdriver and Sandpapers

  • 【GUITAR LUTHIER TOOL KIT INCLUDES】1 x Fret Leveling Sanding Beam (8 inch).
  • 【FRET CROWNING FILE & FRETBOARD GUARDS】made of stainless steel & durable. Fret crowning file is used to narrow fret crowning after leveling, and....
  • 【9 UNDERSTRING RADIUS GAUGE】made of stainless steel & durable. Set of 9 including 7.25", 9.5", 10", 12", 14", 15", 16", 17" and 20" radius gauge,....
  • 【FRET LEVELING SANDING BEAM】made of aluminum alloy material, strong, rust-proof and fine workmanship. There are four kinds of self-adhesive....
  • 【STRING ACTION RULER GAUGE】made of stainless steel & pocket-sized. Used to measure string height, bridge saddle height, pickup polepiece height,....
Check Stock

Mxmoonfree 500N Digital Force Gauge Push Pull Gauge with Force Gauge Stand Force Test Stand Lever-Operated 70mm Stroke and HJJ-001 Clamp x1 (HPB Test Stand+HP-500N)

  • MOUNTING PLATE HEIGHT ADJUSTMENT - The mounting plate has a good range of motion and the height can be adjusted from 3.9 inches to 12.6 inches. When HP-series force gauge is installed, the height of the bottom of the gauge can be adjusted between 1.5 inches and 10.2 inches..
  • DISPLACEMENT SCALE - The digital displacement scale (no output function) helps you measure the displacement during the test. Measurement Range: 0-6"/ 0-150mm | Resolution: 0.0005"/ 0.01mm. And each force gauge stand comes with 1 Pcs HJJ-001 clamp..
  • VARIOUS TEST PARTS - Pressure test parts *4, Tenslie test part *1, Extensive shaft *1, which are able to meet most of the experimental requirements. The portable digital force gauge and various accessories can be put into the carrying case for convenient storage and carrying..
  • DATA STORAGE & OUTPUT - The digital force gauge can use USB for data output, and we provide free SOFTWARE for data analysis and recording. Each package will contain an RS-232→USB data cable. 【NOTE】If you need software, please find us to get it after completing the order..
Check Stock