Reviews Heavy duty Shop Jack

Stark 50-Ton Air & Hydraulic Bottle Jack with Handle Bottle Jack with Built-In Wheels for Maneuverability, Red

  • Ideal Jack - Great for automotive, van, farm, industrial, truck repair, moving machinery, construction work and heavy equipment.
  • Versatile Uses - Safely and reliably lifts most vehicles with a minimum lift of 10-1/2 inches high to a maximum of 17 inches high.
  • Easy to Transport - With Built-in Wheel for easy maneuverability around the shop.
  • Safe and Reliable Lifting - Heavy duty steel construction allows jack to be used multiple times without wear and tear and can handle heavy duty loads with ease..
  • Easy to Connect - Comes equipped with both hose & connector to quickly connect to air compressor for lifting operations with ease.
Check Stock

American Lifting AL2301 Floor Jack 3 Ton - Professional Heavy Duty Hydraulic Rapid Lift Floor Jack for Service Car Truck SUV Red

  • AL2301 is American Liftinng 3 Ton heavy duty car floor jack that built with the strength and duability. It gives you the ability to lift from 5 inches to 22-7/8 inches. With Feature of Rapid Lift, it provides fast, no load lifts to the jacking point in approximately 1/4" to 3/4" increments..
  • Heavy gauge contruction, cast iron lift arm and the flanged side plates add the strength and rigidity. The large swivel saddle with the diameter of 6-3/4 inches to provide you with the easy jack positioning and user safety.
  • AL2301 Garage jack features in-line pump assembly assures long life and no off-center forces for ease in pumping, aligning and reduce wear. And, its sealed hydraulic pump adds the additional durability..
  • Patented built-in by-pass device protects hydraulic system from over pumping damage. It also features the metered release system and U-Joint release mechanism to allow for precise load control..
  • This 3 Ton heavy duty service jack is ideal for auto repair services in the shop and garage. In addition, it is covered with 1-Year warranty from the date of the purchase..
Check Stock

Omega Lift 30 Ton Jack Stands - Pin Style Stand with Heavy Duty Welded Steel - 4-Caster Spider Design with Handle for Easy Positioning - Extra Safety Great for Auto Repair Garage Shop (33300)

  • ...tand is constructed with sturdy welded steel construction for superior safety, durability, and strength. With the lifting range from 12-1/2 inches to 20-1/2 inches, it gives you the ability to handle a wide range of vehicles including small cars, SUVs, and trucks..
  • It features the pin-style jack stand mechanism. The heavy gauge extension tube with a 2-inch adjustable increment is designed for superior safety and helps prevent distortion or twisting. Ensuring the support bar is secured and nested across two corresponding radii before loading. Ensure that the support bar is inserted completely so that the bar stop engages the collar..
  • The car lift jack stand features a large saddle stand surface area for better contact with the load being supported, adding extra safety while working underneath a car. Four spring-loaded casters give you the ability for easily unloaded mobility. The handle allows you to position the saddle to the object effortlessly and safely under the vehicle. The built-in casters and the positioning handle helps pretect one's back and prevent back pain from lifting this heavy duty spider jack stands..
  • Omega Lift heavy-duty jack stands are tested for reliability and safety to meet or exceed ASME PASE 2014 Safety Standards. Ideal for home,....
Check Stock

American Lifting AL2300 Floor Jack 3 Ton - Professional Heavy Duty Hydraulic Car Truck SUV Service Jack Red

  • AL2300 is American Lifting 3 Ton heavy duty car floor jack that built with the strength and duability. It is assembled in the USA with USA and global....
  • Heavy gauge contruction, cast iron lift arm and the flanged side plates add the strength and rigidity. The large swivel saddle with the diameter of....
  • AL2300 service jack features in-line pump assembly assures long life and no off-center forces for ease in pumping, aligning and reduce wear. And, its....
  • Patented built-in by-pass device protects hydraulic system from over pumping damage. It also features the metered release system and U-Joint release....
  • This 3 Ton jack is ideal for auto repair services in the shop and garage. In addition, it is covered with 2-Year from the date of the purchase..
Check Stock

JEGS Hydraulic Utility Floor Jack and Jack Stands | 2-Ton Capacity | Heavy Gauge Steel Frames | Powder Coated Black and Yellow | Heavy Duty Caster Wheels on Floor Jack

  • MUST HAVE COMBO for every shop or garage.
  • UTILITY FLOOR JACK LIFT RANGE 5 1/8 “ to 13”.
  • POWDER COATED YELLOW AND BLACK for great looks and long life.
  • HEAVY DUTY STEEL SWIVEL CASTER WHEELS on floor jack allow moving beneath vehicles with ease.
Check Stock

Jack Boss Floor Jack 3 Ton Capacity Fast Lift Service Jack Steel Heavy Duty Hydraulic Car Jack

  • Specifications:Hydraulic trolley jack features a 3 ton (6,600 lbs) capacity with lifting height from 5.1" to 18.3".Floor Jack saddle Diameter: 4 inch.With quick lift function.Its the best tool for car repairing and auto emergency treatment in garage,shop.
  • Durable Steel Construtions:Heavy duty steel construction provides years of service.Equipped with rugged universal joint for precise load control.Premium stability allows the service jack to work for a long time on all kinds of roads.
  • Safety Guarantee:Car jack comes with built-in internal safety valve and vent plug ensures safe operation.Padded handle provides vehicle protection when jack is lifting.Each floor jack has been rigorously tested to ensure the safety of work.1 Year Warranty guarantee for free return.
  • Flexible Swivel Casters:Equipped with Pair 2" steel front casters and pair 2" 360-degree swivel casters (solid rubber material) for easy positioning of jack.Meets ANSI/ASME PASE safety standards..
  • Applications for Convenient Use:Widely used for car tire change.Lifting range & capacity fit for most cars, trucks, and SUVs.Please carefully check whether our products match your vehicle parameters before purchasing.
Check Stock

OEMTOOLS 24835 Hydraulic Floor Jack, 2.5 Ton Low Profile Automotive Jack, Quick Vehicle Lift Up to 14 Inches, Portable Hydraulic Lift, Fits Under Nearly Any Vehicle

  • HYDRAULIC CAR LIFT: The hydraulic jack is designed to lift 2.5 ton vehicles with minimal effort when performing services or maintenance work.
  • Hydraulic jack lift is built for performance and ease of use.
  • Valuable shop floor jack or garage floor jack.
  • LOW PROFILE FLOOR JACK: Our low profile car jack makes working with low-clearance vehicles much easier, getting under vehicles that standard hydraulic car jacks cannot fit.
  • These low profile floor jacks have a maximum lifting height of 14 inches.
  • SAFE TO USE: These floor jacks for cars, trucks, SUVs, and many other vehicles feature an overload system that prevents use beyond the rated capacity of 2.5 tons.
  • 2.5 ton floor jack can safely fit under and lift nearly any vehicle within its capacity.
  • PORTABLE CAR JACK: This car lifter jack comes with floor jack casters for convenient portability.
  • Heavy duty floor jack features (2) 360 degree rear swivel casters for easy maneuvering.
  • Easily transport this portable car lift around your garage.
  • PRODUCT SPECIFICATIONS: (1) Vehicle Hydraulic Jack.
  • (2) 360 Degree Rear Swivel Casters and (2) Large Front Casters.
Check Stock

CURT 28570 Direct Weld On Heavy-Duty Trailer Jack, 8,000 lbs. 15-1/4 Inches Vertical Travel, Black

  • HEAVY-DUTY STRENGTH. This heavy-duty trailer jack is rated to support up to 8,000 pounds trailer tongue weight (7,000 pounds lift capacity).
  • VERTICAL RANGE. This trailer tongue jack allows for 15-1/4 inches of vertical movement and can be fully retracted for towing (24-1/4-inch retracted height, 39-1/2-inch extended height).
  • EASY OPERATION. This heavy-duty trailer tongue jack features a top-wind handle for easy operation. The handle also has an integrated grip for comfortable handling when raising and lowering the trailer coupler.
  • CORROSION-RESISTANT. For long-lasting corrosion resistance against water, dirt, road salt and more, this trailer jack is protected in a durable black powder coat finish.
  • SECURE INSTALL. This heavy-duty trailer jack is designed to be welded directly onto the trailer tongue (hardware not included).
Check Stock

Omega Lift Heavy Duty 6 Ton Jack Stands Pair - Double Locking Pins - Handle Lock and Mobility Pin for Auto Repair Shop with Extra Safety (JZ060)

  • It Is Constructed With The Sturdy Stamped Steel With A Welded Frame Design For Durability. With The Lifting Range From 16 Inches To 23-1/2 Inches, It Gives You The Abilityto Handle A Wide Range Of Vehicles Including Small Cars, Suvs, And Light Duty Trucks.
  • Omega Lift Heavy Duty Jack Stands Are Tested For Reliability And Safety To Meets Or Exceeds Ansi/Pald Standards. Ideal For Home, Auto, Truck Service, Farm, And Shop Use.
  • Omega Lift Jz060 Is 6 Ton Jack Stands That Are Designed To Support Your Vehicle After Lifting With A Floor Jack. It Features Wide Pyramid Foot Base To Provide The Added Strength And Stable Support.
  • The Ratchet Bar Is Built With Hight Quality Cast Ductile Iron With The Mulitple Position. Its Sawtooth Design Allows For Quick Height Adjustments That Lock Into Place. Height Adjustment Mechanism Allows Smooth Upward Movement While Releasing Handle Locks And Mobility Pin.
Check Stock

Bestauto Bottle Jack 50 T Car Jack Hydraulic Floor Jack 110000LBS with Pneumatic & Manual Hand Pump Air Jack Heavy Duty Auto Truck Repair Lift

  • Air/Hydraulic Bottle Jack: VEVOR 50 tons/110231 lbs bottle jack is ideal for large size and heavy-duty applications. It integrates a pneumatic jack with a hydraulic jack into this one car bottle jack. It is ideal for lifting heavy-duty machinery, industrial construction equipment, farm vehicles, and more..
  • 6-3/10" Lifting Range: With its powerful pneumatic and hydraulic power, our bottle jack can lift a maximum of 50 tons/110231 lbs and has a lifting range of up to 10-1/2 in/27 cm to 17 in/43 cm..
  • Labor-saving Dual Operation: Working pressure range: 120 psi-200 psi. With high-strength air tube, the enhanced compressed air lift with reinforced seal can ensure your security. Manual lifting is also possible with the splicing handle. The design allows the jack to work securely even without power..
  • Considerable Details: With two big wheels and a portable handle, the bottle jack is not trouble when it comes to movement and splicing handles also mean that the storage is easy..
  • Heavy-Duty Steel Structure: This pneumatic bottle jack is constructed of heavy-duty steel for maximum durability. The serrated saddle provides a spacious lifting area. The wide and thick base provides stable support and security. With our bottle, there is nothing to worry about..
Check Stock

TYT 2000lbs Boat Trailer Jack, Heavy Duty Swivel Trailer Jack with 6 Inch Dual Wheels, 12 inches Lift, Zinc-Plated Finish for Boat, RV, Trailer, Camper

  • 【Efficient and Durable Trailer Jack】: Featuring dual sturdy 6-inch poly wheels and a heavy-duty steel construction, this trailer jack can lift up to 2000 lbs with ease. The outer tube has a diameter of 2.5 inches and can provide a maximum lifting height of 12 inches, making it a perfect fit for most trailer tongues. The package size is 65cm*17cm*17cm, with a weight of only 8.35 kg..
  • 【Bolt-On Mounting Hardware】: This trailer jack comes with bolt-on mounting hardware, making it easy to attach to the trailer tongue. The jack capacity is 2000 lbs, ensuring that it can handle most trailer lifting needs..
  • 【Easy to Operate】: This trailer jack features a side-wind handle that allows for smooth and easy operation. The jack can be adjusted to fit specific operation requirements, with a retracted height of 26 inches and an extended height of 38 inches..
  • 【Heavy Duty Material】: Made from heavy-duty steel, this boat trailer jack provides an excellent mounting facility. It is protected with a durable zinc-plated finish, ensuring long-lasting corrosion resistance against water, dirt, road salt, and more..
Check Stock

Bottle Jack 20 Ton Air Hydraulic Bottle Jack Blue Air Car Jack Heavy Duty Repairing Lift

  • Air/Hydraulic Bottle Jack: VEVOR 20 tons/44092 lbs bottle jack is ideal for large size and heavy-duty applications. It integrates a pneumatic jack with a hydraulic jack into this one car bottle jack. It is ideal for lifting heavy-duty machinery, industrial construction equipment, farm vehicles, and more..
  • 6-5/8" Lifting Range: With its powerful pneumatic and hydraulic power, our bottle jack can lift a maximum of 20 tons/44092 lbs and has a lifting range of up to 10-1/4 in/26 cm to 20 in/51 cm..
  • Labor-saving Dual Operation: Working pressure range: 120 psi-200 psi. Manual lifting is also possible with the splicing handle. The design allows the jack to work securely even without power..
  • Considerable Details: A compact structure with dual fast retractable springs to ensure the product can be successfully reset after use. The height of the rod can be adjusted flexibly. Rod adjustable height: 3-1/8 in/8 cm..
  • Heavy-Duty Steel Structure: This pneumatic bottle jack is made of Q235 steel material, providing maximum durability and security. The highly rugged construction provides both power and security. With our bottle, there is nothing to worry about..
Check Stock

Mophorn Air Hydraulic Bottle Jack 20 Ton Bottle Jack Blue Air Jack Heavy Duty Auto Truck Repair Lift

  • Air/Hydraulic Bottle Jack: VEVOR 20 tons/44092 lbs bottle jack is ideal for large size and heavy-duty applications. It integrates a pneumatic jack with a hydraulic jack into this one car bottle jack. It is ideal for lifting heavy-duty machinery, industrial construction equipment, farm vehicles, and more..
  • 6-5/8" Lifting Range: With its powerful pneumatic and hydraulic power, our bottle jack can lift a maximum of 20 tons/44092 lbs and has a lifting range of up to 10-1/4 in/26 cm to 20 in/51 cm..
  • Labor-saving Dual Operation: Working pressure range: 120 psi-200 psi. Manual lifting is also possible with the splicing handle. The design allows the jack to work securely even without power..
  • Considerable Details: A compact structure with dual fast retractable springs to ensure the product can be successfully reset after use. The height of the rod can be adjusted flexibly. Rod adjustable height: 3-1/8 in/8 cm..
  • Heavy-Duty Steel Structure: This pneumatic bottle jack is made of Q235 steel material, providing maximum durability and security. The highly rugged construction provides both power and security. With our bottle, there is nothing to worry about..
Check Stock