Reviews Heavy duty Oil Filter Wrench

DEDC Adjustable Oil Filter Wrench Filter Housing Removal Tool 1/2 inch Drive Oil Filter Remover Kit For 2.4-3.2 inch

  • [Adjustable Size] Small/Medium Size Oil Filter Wrench.
  • Wrench could be adjusted from 60mm to 80mm OR 80mm to 105mm, you can choose as you needed. Fit....
  • [Greater Grip] Specially tooth design jaws ensure that the car oil filter tool hold the filter without slide. And our wrench holds up to half of the....
  • [Easy to Use] Easily put the jaws on the filter while slightly turn the slot at the top of the oil filter wrench counterclockwise. Once the wrench is....
  • [Premium Quality] Our filter wrench was equipped with a high quality spring and heavy duty metal jaws. The spring and movable jaws design loose or....
  • [Package Includes] 1 x Small or medium size Two-claw Adjustable Oil Filter Wrench. We provide perfect custmer service, please feel free to contact....
Check Stock

Motivx Tools Oil Filter Removal Tool - Adjustable Wrench for 2.5" - 3.25" Small Diameter Spin-On Oil Filters

  • SECURELY GRIP AND REMOVE A WIDE RANGE OF FILTERS – The Motivx Tools MX2330 oil filter wrench removes small 2.5” - 3.25” diameter traditional spin-on or canister style oil filters. The wrench features a tooth style design for a secure grip that won't slip and lets you easily and safely remove the filter..
  • HEAVY DUTY CONSTRUCTION – This removal tool features a .050” captured spring as opposed to the flimsy .020” spring found on other wrenches. The jaws are built tough using nickel plated 4130 chromoly steel and attached to the 3/8” thick solid steel top plate. Low profile design gives you access to tight access spots..
  • EASY TO USE – Simply slide the jaws of the wrench over the filter while slightly rotating to the right (tighten). Once the wrench is seated in place on the filter, use a ratchet and 3/8" extension to begin ratcheting the wrench counter-clockwise (loosen). The jaws will grip the stuck filter tightly and begin loosening it..
  • PROFESSIONAL QUALITY - Motivx Tools is a specialty tool company located in the United States and we take great pride in our products. These oil filter wrenches are b....
Check Stock

EWK 36mm Oil Filter Wrench Socket for Cartridge Type Oil Filter on Ford, VW, Audi, BMW, Mini, Porsche

  • 【 Easy Removal 】 EWK 36mm oil filter removal tool features 6-point hex to prevent rounding-off the filter canister. The 6 flat sides allow the oil filter wrench to grip the filter cartridge tightly and prevents binding..
  • 【 Perfect Fit 】 Compatible with Ford F250 6.0, F250 6.4, various BMW, Mercedes, Mini, VW, Audi, Volvo, Porsche and some Duramax engine vehicles with a 36mm oil filter cap..
  • 【 Low Profile Design 】 The oil filter socket is slim and thin which allows easier access to confined spaces. And the special 6-points hex wall holds securely on the oil filter without slippage..
  • 【 Heavy Duty 】 The durable 36mm oil filter wrench is constructed of quality CR-V Steel with manganese phosphate coating to resist rust and corrosion..
  • 【 EWK Assurance】Excellent WorKing experience guaranteed! EWK provides you premium quality tools and the best service with 12 months warranty. If there is any problem or concern with our products, please contact us for assistance..
Check Stock

OEMTOOLS 25323 10” Master Oil Filter Locking Pliers, Universal Fit, Locking Grip, Heavy Duty Adjustable Wrench for Easy Oil Filter Removal

  • Adjustable Oil Filter Removal Tool: Jaw capacity to fit spin-on filters between 2 1/8 Inches to 4 1/2 inches or 55-120 millimeters.
  • Intelligently Designed: The design of locking pliers secures its grip on the oil filter, so you can focus entirely on applying pressure and torque to remove the filter.
  • Secure Grip: The machined jaw teeth of the locking pliers provide a sure grip and easy removal without damaging filters.
  • Unlock mechanism makes it easy to disengage.
  • Precise Application: Adjust and lock in the grip of the pliers to remove any margin for error during the oil filter removal process.
  • Built to Last: This heavy-duty oil filter adjustable wrench is made of high-quality steel.
Check Stock

AUPREX Oil Filter Wrench 64mm 14 Flute Oil Filter Removal Tool for Toyota,Lexus,Camry,Tundra,Highlander, RAV4, 4 Runner, Scion and Other 2.0L-5.7L Engines with Cartridge Style Oil Filter Housing

  • APPLICATIONS: This oil filter wrench is compatible with Toyota, Lexus, RAV4, Camry, Tundra, Highlander, Sienna and other vehicles equipped with 2.5L to 5.7L engines that use Toyota's cartridge style oil filter system. But it is not working on vehicles with disposable traditional spin-on canister filers and the 1.8L engines..
  • HIGH QUALITY MATERIAL: This Toyota oil filter wrench is made of high quality 6061 aluminum alloy which provides a great strength to unscrew without any damages or flex on it. The surface of this oil filter is treated with high quality black anodized finish to prevent corrosion..
  • REASONABLE DESIGN: The 64mm 14 flute oil filter wrench is with 4 teeth on the bottom edge to perfectly match the tabs on Toyota style oil filter housing which can efficiently prevent the slippage while unscrewing the oil filter housing..
  • INSTRUCTIONS: The oil filter wrench can be applied to a 27mm socket or 3/8” drive ratchet wrench to install or remove the oil filter. Simply match the wrench on the oil filter cap and unscrew with a socket or ratchet wrench..
  • EASY TO TAKE THE WRENCH OFF: Compare to some oil filter wrenches which are usually stuck on the cap, AUPREX oil filter wrench is easy to release from the oil filter housing..
Check Stock

GearWrench KDT-41890 Oil Canister Socket Set Service Kit - 0.38 in.

  • 32 mm. Oil Filter Cap Wrench (KDT - 3932).
  • 27 mm. Oil Filter Cap Wrench (KDT - 3933).
  • 36 mm. Oil Filter Cap Wrench (KDT - 3934).
  • 24 mm. Oil Filter Cap Wrench (KDT - 3935).
  • 29 mm. Oil Filter Cap Wrench (KDT - 3936).
Check Stock

TOYOTA Genuine OEM 00279-0WQTE-01 Oil (4 QUARTS)

  • STRONG AND DURABLE: This oil filter wrench is made of high-quality aluminum alloy, ensuring strength and durability. The surface of the oil filter cap removal tool is treated with a high quality black anodized finish, anti-rust and anti-corrosion to prolong the service life of the tool..
  • APPLICATION: Install the 64mm 14 flute cup style oil filter wrench on the filter cover, it can clamp and provide maximum torque with multiple contact points to rotate the extremely tight oil filter cover, and cooperate with a 27mm socket or 3/8” (10mm)drive ratchet wrench to loosen it..
  • APPLICABLE MODELS: Oil filter cover removal tool is suitable for most car models, such as Toyota, Lexus, RAV4, Camry, Tundra, Highlander, Sienna and More vehicles equipped with 2.5L to 5.7L engine that that use Toyota's cartridge style oil filter system. But the filter wrench does not fit the car with disposable conventional spin-on filters and 1.8L engine oil filter cap..
  • DESIGN: The bottom edge of the oil filter wrench has 4 slots for a perfect match with the vehicles using 15620-31060, 15620-36010, 15620-36020 oil filter housing covers. The tooth-like s....
Check Stock

Superb Wrench HW-SL-MW4 Replacement Filter Housing Wrench, Silver/Blue

  • SOLID CONSTRUCTION – Made out of 7-gauge galvanized steel, this heavy-duty zinc-plated metal filter wrench will not bend, bow or break when changing/removing stuck housings..
  • ENHANCED CONTROL – This house water filter wrench features an easy-to-hold rubberized handle that is longer than standard plastic filter wrenches, ing more leverage and superior grip..
  • QUICK AND EASY REPLACEMENT – This water filter wrench allows for quick and easy replacement by helping to lose even the most stuck or jammed filtration system housings..
  • EASY TO USE – The metal filter wrench features a directional arrow label with word “loosen” imprinted to ensure turning the filter housing unit in the right direction for removal/change..
  • COMPATIBLE WITH – This 3. 58” dia. water filter cartridge wrench fits most Pentek SW-1 # 150539 SW1 Slim Line, Culligan / Ametek / US Filter / Plymouth / Kleen Plus / American Plumber / Bruner, SW-1 water filter housing, and other slim line housings..
Check Stock

XtremepowerUS 2-1/2 to 4 Two Way 3 Leg Oil Filter Wrench Remover

  • Wide Application - The oil filter wrench can be adjust to remover the filters from 2-1/2 inch to 4 inch filters. Fits 1/2 and 3/8 inch square drive....
  • Special Design - The oil filter wrench is specially designed with three jaws. These three jaws will catch the filter more tightly..
  • Function Type -The oil filter wrench is a universal tool to remove the filters on your vehicles. Sometimes the filters are very tough. Then you need a....
  • High Quality - The oil filter wrench is made of 45# carbon steel. This kind of material is much stronger than the normal materials. With the shinning....
  • Easy to use - This Oil Filter Wrench is used to remove the oil filter from cars and trucks. It is adjustable simply adjust it on the filter by turning....
Check Stock

FIRSTINFO F3546BENZ 84.4 mm 14 Flutes Oil Filter Wrench for Mercedes-Benz, Dodge and Jeep with 3.0L Diesel Engines

  • 【APPLICATION】This 84mm 14 Flute oil filter wrench is a specially designed removal and installation tool for Mercedes-Benz with 3.0L Diesel Engines, Jeep Cherokee 2007 with 3.0L V6 Diesel Engine, and Dodge Sprinter 2007..
  • 【PERFECT FITMENT】Producing with tight tolerance makes this filter wrench perfect fits with the filter housing to deliver maximum removal torque and prevent the plastic tabs suffer from the improper point of application on them..
  • 【HEAVY DUTY】High-quality aluminum construction for strength and durability rather than some inferior material. Plus, the chrome-plated surface provides corrosion and rust resistance making this a lifelong product..
  • 【MULTI DRIVE】This wrench can be operated with a 3/8” drive ratchet, 27mm socket or adjustable spanner. NOTE: DO NOT use pneumatic tools or electric tools..
  • 【FIRSTINFO ASSURANCE】MADE IN TAIWAN is our pride, and we guarantee premium quality without a premium price. Thus, we provide quality assurance tools with a 12+10 months after-sales warranty (10 months warranty by the register).
Check Stock

7-Piece Oil Filter Cap Wrench Tool Kit Includes 24mm,27mm,29mm,30mm,32mm,36mm,38mm Socket Set Compatible with Mercedes Benz VW BMW and More Automotive Cartridge Oil Filter Housing Black

  • COMPZTIBLE WITH - Ibetter oil filter cap remover set is suitable for the oil filters with canister oil filter housing and plastic cap/lid that....
  • PAKAGE LIST – Ibetter 7-Piece oil filter cap wrench tool kit includes 24mm oil filter wrench,27mm oil filter wrench,29mm oil filter wrench,30mm oil....
  • SUPER DURABLE - Ibetter oil filter wrenches are constructed from high-quality material which could absolutely ensures strength and durability..
Check Stock

ABN Oil Filter Cap Wrench Metric 7-Piece Socket Set Tool Kit 24mm to 38mm for BMW Mercedes VW Paper Cartridge Housing

  • NO GUESSING: The ABN Oil Filter Wrench 7-Piece Socket Set Tool Kit includes 24mm, 27mm, 29mm, 30mm, 32mm, 36mm, and 38mm oil filter socket sizes so....
  • VARIETY OF VEHICLES: Fits vehicles with newer oil filter design.
  • Mercedes, Cadillac, Buick, Saturn, SAAB, Dodge, Ford, Mini Cooper, and some BMW and....
  • QUICK REMOVAL: Low profile short well 6-point design with a 3/8-inch socket drive for a ratchet or extension.
  • BUILT TO LAST: Constructed from chrome-vanadium (CR-V) steel for maximum strength and corrosion-resistance.
  • EASY STORAGE: Heavy-duty 8.5” x 4.5” x 2” inch (21.6cm x 11.4cm x 5.1cm) plastic blow-molded carrying case for easy transportation, safe....
Check Stock

OEMTOOLS 25101 3-Jaw Adjustable Magnetic Oil Filter Wrench, Oil Filter Wrench Small, Oil Filter Wrench Adjustable, Black and Green

  • APPLICATIONS GALORE: This adjustable oil filter wrench removes oil filters on many domestic and foreign light trucks and passenger vehicles, as well as motorcycles and lawnmowers.
  • EXTRA GRIP: Our oil filter puller includes a magnetic base attachment that keeps the oil filter remover securely in place while you remove filter caps.
  • VERSATILE: This auto adjustable oil filter wrench fits filter sizes between 2.4 to 3.6 inches (60MM to 93MM).
  • HOLD ON TIGHT: Our adjustable filter wrench features spring-loaded jaws for a more secure grip than the average oil filter claw wrench.
  • DON'T GET STUCK: Working in tight areas is hard enough without stuck on filters.
  • This compact adjustable oil filter removal tool removes tough filters in tight spaces.
Check Stock