Reviews Heavy duty Mounting Bolt

Aoneky Outdoor Replacement Breakaway Basketball Rim

  • This is a very heavy rim and usually only fit the largest basketball court rims, compatible with 5x5in, 5x4.5in, 5x4in, 5x3.5in, 5x3in, 4x3in mounting bolt pattern, not for kids backboard or other bolt pattern, please make sure it works with your bolt pattern(Refer to the left mounting hole dimensions image)in your backboard if you want to install it in other backboard not mentioned in this detail page.
  • 18 mm all solid steel heavy duty basketball rim.
  • 2 compression springs for slam dunk back action.
  • 18'' Diameter, all-Weather nylon net included.
  • Orange powder-coated finish, build for long time using.
Check Stock

Aoneky Outdoor Replacement Basketball Rim - 18 mm Solid Steel

  • This is not a break-away rim! It is a very heavy solid stationary rim and usually only fit the largest basketball court rims, compatible with 5x5in, 5x4.5in, 5x4in, 5x3.5in, 5x3in, 4x3in mounting bolt pattern, not for kids backboard or other bolt pattern, please make sure it works with your bolt pattern(Refer to the left mounting hole dimensions image)in your backboard if you want to install it in other backboard not mentioned in this detail page.
  • 18 mm all solid steel heavy duty basketball rim.
  • 18'' Diameter, 5.5''braces regulation basketball rim.
  • Orange powder-coated finish, build for long time using.
Check Stock

Aexit Blue Zinc Anchors Plated Screw Type Car Repair Expansion Bolt Stud Anchors M10x80mm 4pcs

  • EASY INSTALL TOGGLE BOLTS - These Elephant ANCHORS Drywall anchors mounting kit from CondoMounts are perfect for Wall and Ceiling mounting and feature the newer version of Wing/Toggle bolts. This kit is so simple to use that installation is typically 7x faster than normal! Also, our kit makes a smaller hole that holds more!.
  • A Revolution In Mounting - Our Heavy Duty 19-Piece Mounting Kit replaces the old fashioned toggle wings, wing anchor, molly bolts, and butterfly anchors system and can be pre-installed without using a bolt since our anchors won't fall off and into your wall..
  • Most Types Of Wall & Ceilings - Can be used in various hollow walls and ceiling 3/8" to 3" thick drywall, mdf, plywood, sheetrock, hollow block, plaster, tiles, Granite, plasterboard, sheet rock, gypsum board, cement board,.
  • Other Heavy Duty Mounting Needs - Perfect for hanging curtain rods, coat racks, bookshelves, hanging cabinets, sinks, curtain rods, bookshelf, racks, coat racks..
  • HEAVY DUTY DRYWALL MOUNTING KIT- The CondoMounts Heavy Duty 19-Piece 90lbs Drywall Mounting Kit includes 6 pieces of 3/16 hollow wall Elephant Toggle Anchors, 6 individual 3/16 x 2’’ screws, and one titanium coated hex shank ½’’ Drill Bit, providing everything needed for an easy mounting e....
Check Stock

TYT 2000lbs Boat Trailer Jack, Heavy Duty Swivel Trailer Jack with 6 Inch Dual Wheels, 12 inches Lift, Zinc-Plated Finish for Boat, RV, Trailer, Camper

  • ...ailer jack can lift up to 2000 lbs with ease. The outer tube has a diameter of 2.5 inches and can provide a maximum lifting height of 12 inches, making it a perfect fit for most trailer tongues. The package size is 65cm*17cm*17cm, with a weight of only 8.35 kg..
  • 【Bolt-On Mounting Hardware】: This trailer jack comes with bolt-on mounting hardware, making it easy to attach to the trailer tongue. The jack capacity is 2000 lbs, ensuring that it can handle most trailer lifting needs..
  • 【Easy to Operate】: This trailer jack features a side-wind handle that allows for smooth and easy operation. The jack can be adjusted to fit specific operation requirements, with a retracted height of 26 inches and an extended height of 38 inches..
  • 【Heavy Duty Material】: Made from heavy-duty steel, this boat trailer jack provides an excellent mounting facility. It is protected with a durable zinc-plated finish, ensuring long-lasting corrosion resistance against water, dirt, road salt, and more..
  • 【Swivel Design for Convenience】: The swivel bracket on this boat jack stand ensures plenty of clea....
Check Stock

Glensam Spare Tire Carrier, Spare Tire Mount Bracket for Trailer Zinc-Plated Steel, Fits Most 4 & 5 & 6 Lugs Wheels on 4\

  • Heavy-duty, welded, reinforced zinc-plated steel construction.
  • Fits 4 hole rims with 4" bolt circle patterns and 5 hole rims with 4.5" bolt circles.
  • Designed for front or mid-trailer mounting.
  • Easy-to-install bolt-on design - No cutting or drilling.
  • All mounting hardware included - Two-year replacement warranty.
Check Stock

Seachoice Trailer Coupler, Repair Kit, 2 in.

  • ...pler is a custom made 1 inch diameter 1045 medium carbon steel bolt. Heat treated to prevent wear & includes a machined grease passage for easy lubrication & maintenance. Yield strength of the 1" pivot bolt exceeds the two 5/8" bolts used to hold a typical ball coupler on the vertical channel. This does not include mounting bolts..
Check Stock

Homax 80099 No-Sag EasyGate Bracket Kit

  • Steel 5/8" J-Bolt Adjustable Barrel hinges provide full range of swing for gates and doors. The length of the threaded arm measures 4.3". Welding plates are 0.25" thick, and the barrels are 1"..
  • These heavy duty hinges are just what you need to hang doors and gates where you require full range of motion. Made of high quality steel with a black powder coating. Comes with all necessary hardware, no need for extra pieces, like springs. These J-hook style hinges are heavy duty, and excellent for gate hinges hardware, door hinges, chain link fence parts, swing gate openers, blast gates, driveway gates, and even as gate latches for metal gates, in general..
  • To Install - Weld the flat backing plate to the mounting post. If not already available, drill a hole through the gate frame big enough for the threaded bolt. Pass the bolt through, and secure with nuts. Hinges must be mounted with the thread arm at the top. If mounted upside down, the gate will fall..
  • Minimum distance between post and gate should be 1.5.
Check Stock

MDLUU Leveling Machine Casters with Rubber Pad FM-60F Plate Mounted Retractable Workbench Caster Leveling Feet Wheels Loading Capacity 551lbs/Per Pack of 4

  • MATERIAL: These leveling casters are made of solid metal , NBR pad and nylon wheel.
  • SIZE: Top plate is 2.87"× 2.87" (L×W), Mounting hole diameter is 0.27", Bolt holes distance is 2.28"× 2.28" (L×W), Wheel diameter is 2", Overall....
  • LOAD CAPACITY: Each leveling caster loads up to 551 lbs, 4 packs casters easy to hold 2204 lbs heavy duty machine.
  • PERFECT SOLUTION: Leveling casters can freely move the heavy duty items and put in one position by manual adjust NBR pad.
  • GREAT FOR: Mounting on the carpenter workbench, equipment cabinets, vending Machine ,bank operating devices and other heavy duty items.
Check Stock

J bolt gate Hinges Heavy Duty 5/8\ pivot hinge Adjustable Barrel Driveway Pair for welding

  • Steel 5/8" J-Bolt Adjustable Barrel hinges provide full range of swing for gates and doors. The length of the threaded arm measures 4.3". Welding plates are 0.25" thick, and the barrels are 1"..
  • These heavy duty hinges are just what you need to hang doors and gates where you require full range of motion. Made of high quality steel with a black powder coating. Comes with all necessary hardware, no need for extra pieces, like springs. These J-hook style hinges are heavy duty, and excellent for gate hinges hardware, door hinges, chain link fence parts, swing gate openers, blast gates, driveway gates, and even as gate latches for metal gates, in general..
  • To Install - Weld the flat backing plate to the mounting post. If not already available, drill a hole through the gate frame big enough for the threaded bolt. Pass the bolt through, and secure with nuts. Hinges must be mounted with the thread arm at the top. If mounted upside down, the gate will fall..
  • Minimum distance between post and gate should be 1.5.
Check Stock

Stark Universal 36' inch Winch Mounting Plate 13000 lb Capacity Mount Bracket Recovery Winch Truck Trailer ATV

  • Recommended Use - Provides a secure platform to accommodate larger bumpers to eliminate roller fairlead interference & multiple mounting holes fit a variety of winches.
  • Heavy Duty Steel Construction - Our winch mounting plate is made of heavy duty steel, durable construction insures its long lifespan.
  • Prevent Rust Design - Features a durable black powder coating, even put it outdoor or wet by rain for a long time, it can be guaranteed not to rust easily and keep the original state..
  • Large Carrying Capacity - Perfect for 8000 lb to 13000 lb Winches, solid steel construction with one-piece fully welded design for extra strength.
  • Easy Installation - Pre-drilled, it's perfectly match with original mounting holes, no modification required. As well as 10" on center fairlead bolt pattern and 10" x 4-1/2" standard winch mount pattern ensure the installation is more convenient..
Check Stock

Leader Accessories Pontoon Captains Bucket Seat Boat Seat White/Gray piping

  • High impact injection molded plastic frame.
  • Plush foam padding covered with heavy-duty marine grade vinyl.
  • Use standard 5"x 5"or 5"x 12"mounting bolt pattern.
Check Stock

The Deep: A Novel of Terror Beneath the Sea

  • High impact injection molded plastic frame.
  • Plush foam padding covered with heavy-duty marine grade vinyl.
  • Use standard 5"x 5"or 5"x 12"mounting bolt pattern.
Check Stock

Leader Accessories Pontoon Captains Bucket Seat Boat Seat White/Red Piping

  • High impact injection molded plastic frame.
  • Plush foam padding covered with heavy-duty marine grade vinyl.
  • Use standard 5"x 5"or 5"x 12"mounting bolt pattern.
Check Stock