Reviews Heavy duty Corner Bumper Guards

Corner Protector for Baby (8 Large Corners) - RovingCove Hefty-Fit Heavy-Duty Soft Rubber Foam Furniture Corner Bumper Guards, 3M Adhesive Pre-Taped, Onyx Black

  • Baby Proofing Rubber Foam Corner Bumper Guard for Furniture and Fireplace. HEAVY-DUTY PREMIUM RUBBER FOAM: Shore A 20-N density / 0.4-inch thick. Thick, dense and soft - maximum impact absorbent..
  • CLEAN SAFETY: Roving Cove uses safe and pure raw material and was the first brand to make foam safety bumpers without the use of toxic flame-retardant chemicals (SCCPs). Our corner protector contains no BPA, no phthalates, no heavy metals, no latex, no SCCPs. Inherently flame-resistant.
  • passed flammability tests under US regulations..
  • DENSEST: Density is more important than thickness.
  • when it comes to softening impact. Roving Cove corner guards measure Shore A 20-N density, much more than the industry standard of 13. Soft, high-density, premium corner cushions absorb impact and protect your loved ones from the sharp corners and edges in your home (nursery, kitchen, fireplace, coffee table), school, daycare, preschool, hospital, senior facility, nursing home, factory, office, museum, restaurant, hotel and more..
  • SECURE ADHESION: Includes authentic, easy-to-peel, premium 9448A 3M double-sided tape on PRE-TAPED corner cushions. ....
Check Stock

Encased Belt Case for Motorola One 5G ACE Case with Screen Protector and Holster Clip - Heavy Duty Protection for Moto One 5G UW Ace (Black)

  • Please note: This case is only compatible with the Motorola One 5G UW Ace.
  • Purchase peace of mind. The Falcon Series provides full-body case protection with excellent durability, a shock resistant bumper and reinforced corner guards..
  • The Falcon case features a no-nonsense heavy duty protective design and upgraded dual layer construction providing rugged protection for your new Phone.
  • Built to last: The case is engineered with a commuter ready polycarbonate outer frame and shock absorbent inner tpu lining.
  • Reinforced corners and a built in screen guard offer heavy duty device + screen protection. Responsive easy-press buttons retain the original button click & feel..
Check Stock

EAG Off Road Black Textured Rear Corner Rocker Guard Fit for 97-06 Wrangler TJ

  • PROTECTION - Guard your Wrangler's paint and body panels from brush, stones, and other trail hazards with EAG corner guards. (NOTE: Fender flares are not included！).
  • DURABLE STEEL CONSTRUCTION - Manufactured from heavy duty 5/32 sheet steel for strength and durability, Textured black finish..
  • KITS INCLUDE - Includes driver and passenger side corner guards. All mounting hardware included..
  • INSTALLATION - These rear corner guards are simple and straight forward to install, but will require some drilling into the body panels for proper installation..
Check Stock

Justin Men's Stampede Rush Western Work Boot Soft Toe Brown 12 D(M) US

  • NO MORE BLOCKING: GCGOODS micro-mesh gutter guards, helps stop debris like leaves, pine needles, twigs & roof grit from blocking the gutter, keep gutter flowing, save your time to clean the gutter.
  • DURABLE MATERIAL: Constructed of durable stainless steel mesh with epoxy coating finish, corrosion resistant and rust free.
  • HEAVY DUTY CONSTRUCTION: Heavy-duty material can withstand snowstorms and heavy rain. These gutter guards are not easy to deform and can stay in place firmly, last a long service life.
  • FIT ANY GUTTER: Universal design, fits most 5″ standard gutter system, k-style or other gutter systems, the gutter guard pieces can be cut to any angle to fit the corner.
  • PACKAGE INCLUDED: 15 pieces gutter guards, 48ft in total. Necessary hardwares provided, includes self-drilling screws(4 per piece) , and 1 x magnetic hex driver. Please check the installation guide or video for easy installation.
Check Stock

Roving Cove Baby Safety Edge Corner Guards (18ft Edge + 8 Corners), Heavy-Duty, Soft NBR Rubber Foam, Baby Proofing Furniture, 3M Adhesive, Onyx Black

  • HEAVY-DUTY PREMIUM RUBBER FOAM: Shore A 20-N density / 0.4-inch thick - maximum impact absorbent..
  • CLEAN SAFETY: Roving Cove uses safe and pure raw material and was the first brand to make foam safety bumpers without the use of toxic flame-retardant chemicals (SCCPs). Our edge corner guards contain no BPA, no phthalates, no heavy metals, no latex, no SCCPs. Inherently flame-resistant.
  • passed flammability tests under US regulations..
  • DENSEST: Density is more important than thickness when it comes to softening impact. Our edge and corner guard measure Shore A 20-N density, much more dense than the industry standard of 13. Soft, high-density premium cushions absorb impact and protect your loved one from the sharp corners and edges in your home (nursery, kitchen, fireplace, coffee table), school, daycare, preschool, hospital, assisted living facility, senior housing, nursing home, factory, office, museum, restaurant and more..
  • JUMBO PACK: Covers 20.4 feet (245 inches) of surface area: 18 feet (5.5 meters) edge guards + 8 corner guards. Fits all standard size tables (round table up to 69" diameter, square table up to 56" square and rectangle table up to 36" x 78"). L-Shaped safety bumpers. Industrial strength..
  • SECURE ADHESION: Includes authentic easy-to-peel....
Check Stock

GCGOODS Gutter Guard, 5 inch Micro Mesh Gutter Cover System, 48Ft, Leaf Protection, Prevents Clogged Downspouts, Easy DIY Installation & Weatherproof, Grey

  • NO MORE BLOCKING: GCGOODS micro-mesh gutter guards, helps stop debris like leaves, pine needles, twigs & roof grit from blocking the gutter, keep gutter flowing, save your time to clean the gutter.
  • DURABLE MATERIAL: Constructed of durable stainless steel mesh with epoxy coating finish, corrosion resistant and rust free.
  • HEAVY DUTY CONSTRUCTION: Heavy-duty material can withstand snowstorms and heavy rain. These gutter guards are not easy to deform and can stay in place firmly, last a long service life.
  • FIT ANY GUTTER: Universal design, fits most 5" standard gutter system, k-style or other gutter systems, the gutter guard pieces can be cut to any angle to fit the corner.
  • PACKAGE INCLUDED: 15 pieces gutter guards, 48ft in total. Necessary hardwares provided, includes self-drilling screws(4 per piece) , and 1 x magnetic hex driver. Please check the installation guide or video for easy installation.
Check Stock

SuperATV Rear Bumper for 2015-2020 Polaris RZR 900 - Made of 1.75\ Heavy-Duty Steel Tubing | Wrinkle Black | UV and Rust-Resistant Powder-Coated | Bolt-On Mounting Style | Full Back End Protection

  • 【Fits】2015-2020 Polaris RZR 900 | 2015-2020 Polaris RZR S 900 | 2015-2017 Polaris RZR XC 900.
  • 【Heavy Duty】 This RZR S 900 Rear Bumper is made with 1.75" heavy-duty steel tubing and topped off with a UV and rust-resistant powder coating to keep this Polaris RZR bumper durable for years to come! This combo gives your Polaris RZR rear end unbeatable protection!.
  • 【Rear End Protection】 Protect your RZR with a Super ATV Polaris Rear Bumper! It guards you from every rock, stump, brush pile or whatever else you may back into AND protects you from scratches and dents in your Polaris RZR paint. Don't go another day without a RZR 900 Rear Bumper..
  • 【Sleek Design】 This isn't one of your run-of-the-mill UTV Rear Bumpers. Our expert design of this Polaris RZR brush guard provides a sleek and stylish look while protecting your entire back end. This Polaris RZR 900 Bumper is a bolt-on mounting style and includes all hardware and instructions for an easy install..
  • 【Easy Install】With a bolt-on mounting design, our Polaris back bumper is easy to install following the included installation instructions..
Check Stock

F1 Flexiwrap 6\-6 W/O Handle (EA)

  • EASY-TO-USE: These are engineered to work with any rope, chain or tie-down straps up to 4 inches wide. Simply feed your webbed strap through and tie it down. Rounded peaks keep your straps from slipping off or fraying..
  • HEAVY DUTY: LTM Corner Guards are built tough and are thicker than the competition. They use a durable white material that won’t mark your cargo and can withstand extreme temperatures or weather..
  • RELIABLE: There’s no safer way to secure your load than by using Corner Guards. This design distributes pressure across a wide area and keeps your cargo locked down and protected..
  • MADE IN USA: The entire LTM Concrete product line is made in the USA, including 100% of our raw materials. Buy LTM and keep America working..
Check Stock

VEVOR Stainless Steel Corner Guards 0.5 x 0.5 x 48 inch Metal Wall Corner Protector Pack of 5 Corner Guards 20 Ga 304 Stainless Corner Guard with 90-Degree Angle for Wall Protection and Decoration

  • Heavy-Duty Stainless Steel: Our metal corner wall guards are made of food-grade 304 stainless steel. On the one hand, it provides great durability and long service life, while on the other hand, it shows an elegant wall decoration..
  • Accurately Sheared & Formed: The metal corner guards for walls feature a 90-degree angle, perfectly fit for 90-degree corners. The 90-degree angle makes the steel corner protector fit tightly against the wall without gaps, decreasing the possibility of falling off..
  • 0.5 X 0.5 Inch Wall Corner Protector: Dimensions: 0.5 x 0.5 x 48 inch. This stainless steel edge trim not only stops the wall corner from damage but also beautifies the wall. Besides, our metal wall guard is designed with smooth edges, comfortable and safe to touch for an excellent user experience..
  • Convenient Installation: The package comes with 5pcs corner wall guards, meeting various customers’ quantity needs. The 0.5-inch wall corner guard is easy to assemble with two adhesive strips included in our package. Mounting holes are not required..
  • Various Application: This stainless steel corner protector is suitable for walls of different materials, such as normal white walls, metal walls, tiled walls, glass walls, etc. It is widely used in restaurants, offices, ....
Check Stock

Metal Box Corner Protector 4pcs, glrovazas Silver Decorative Edge Corner Protectors Edge Safety Bumpers for Box Table Desk, Furniture Corner Cover Guard Corner Furniture Hardware

  • Creative Design: This heavy-duty edge cover is a must-have for home decoration. Metal edge guards are two holes at the edges of two faces to facilitate firm fixation with nails. Desk corner guards can protect your furniture, repair broken furniture, decorate your furniture, and look like part of the furniture..
  • Material: The metal desk corner protector is made of zinc alloy, which is rust proof, wear-resistant, corrosion-resistant, long service life, no deformation, no fading, and protects your desk, box and wooden case from damage..
  • Size: The metal corner protector size is 65mm*65mm*20mm/2.5in*2.5in*0.78in(L*W*H). Its thickness and hardness are enough to meet the requirements of traditional furniture..
  • Easy Installation: This simple cabinet metal corner guard is equipped with matching nails, which is easy to install and disassemble. You just need to determine the installation position and hammer the nails into the table with a hammer. In this way, the corner protector is firmly fixed on the table..
  • Wide Application: Metal furniture corner guards have a simple style and are well ma....
Check Stock

Ultimate Protective License Plate Cover and Bumper Guard | Thick Heavy Duty Rubber Prevents Scratches and Dents in Low Impact Bumps | Universal Fit for Cars,Trucks SUVs and Vans Screws Included

  • THE BEST CAR ACCESSORY YOU CAN GET - Provide maximum protection to your vehicle's bumper with this 2.3 inches AR-PRO Ultimate License Plate Bumper Guard. It's more than just a handsome new accessory for your car. It can protect your front bumper from scratches and dents during low-impact bumps. Upgrade your front bumper protection with this jet-black, thick, and durable license plate holder and bumper protector..
  • THICK, HEAVY-DUTY RUBBER LICENSE PLATE MOUNT - At 2.3 inches thick, this rubber license plate frame can take a beating. Made from heavy-duty rubber, the frame has a high impact and tensile strength. It can withstand the impact and surface abrasions from backing up accidents and garage wall mishaps. As it is thicker and more well-built than most bumper guards, this design can withstand rougher bumper taps and provide a wider breadth from obstructions in front of the car..
  • UNIVERSAL FIT ULTIMATE LICENSE PLATE BUMPER GUARD - With great looks that perfectly combine with its fantastic function, the AR-PRO Ultimate License Plate Bumper Guard keeps your car's front bumper in pristine condition whether you have an SUV, van, or truck. This front bumper protector fits standard US license plate size of 6 inches by 14 inches. And with an adjustable mounti....
Check Stock

Roving Cove Corner Edge Protector for Baby Proofing (Large 18ft Edge + 8 Corners), Hefty-Fit Heavy-Duty, Soft NBR Rubber Foam, Furniture and Fireplace Safety Corner Edge Bumper Guard, 3M Adhesive, Oyster White

  • HEFTY-FIT HEAVY-DUTY PREMIUM RUBBER FOAM: Shore A 20-N density / 0.4-inch thick / 0.8-inch deep - maximum impact absorbent..
  • CLEAN SAFETY: Roving Cove uses safe and pure raw material and was the first brand to make foam safety bumpers without the use of toxic flame-retardant chemicals (SCCPs). Our edge corner guards contain no BPA, no phthalates, no heavy metals, no latex, no SCCPs. Inherently flame-resistant.
  • passed flammability tests under US regulations..
  • DENSEST: Density is more important than thickness when it comes to softening impact. Our edge and corner guard measure Shore A 20-N density, much more dense than the industry standard of 13. Soft, high-density premium cushions absorb impact and protect your loved one from the sharp corners and edges in your home (nursery, kitchen, fireplace, coffee table), school, daycare, preschool, hospital, assisted living facility, senior housing, nursing home, factory, office, museum, restaurant and more..
  • JUMBO PACK: Covers 20.4 feet (245 inches) of surface area: 18 feet (5.5 meters) edge guards + 8 corner guards. Fits all standard size tables (round table up to 69" diameter, square table up to 56" square and rectangle table up to 36" x 78"). L-Shaped safety bumpers. Industrial strength..
Check Stock

Prevue Hendryx Signature Select Series Wrought Iron Bird Cage in Black

  • Wrought iron select cages offer quality craftsmanship at an affordable price.
  • 4 Stainless steel cups, 2 wood perches, cage stand, playtop and rounded seed guards are included.
  • Heavy-duty push button door lock keeps your bird secure.
  • Durable wrought iron construction enhanced by a non-toxic powder-coated finish. Rounded-corner seed guards control debris mess.
  • 30-Inch long, 22-inch wide, 63-inch high with 3/4-inch wire spacing.
Check Stock