Reviews Heavy Gauge Jack

American Lifting AL2301 Floor Jack 3 Ton - Professional Heavy Duty Hydraulic Rapid Lift Floor Jack for Service Car Truck SUV Red

  • AL2301 is American Liftinng 3 Ton heavy duty car floor jack that built with the strength and duability. It gives you the ability to lift from 5 inches to 22-7/8 inches. With Feature of Rapid Lift, it provides fast, no load lifts to the jacking point in approximately 1/4" to 3/4" increments..
  • Heavy gauge contruction, cast iron lift arm and the flanged side plates add the strength and rigidity. The large swivel saddle with the diameter of 6-3/4 inches to provide you with the easy jack positioning and user safety.
  • AL2301 Garage jack features in-line pump assembly assures long life and no off-center forces for ease in pumping, aligning and reduce wear. And, its sealed hydraulic pump adds the additional durability..
  • Patented built-in by-pass device protects hydraulic system from over pumping damage. It also features the metered release system and U-Joint release mechanism to allow for precise load control..
  • This 3 Ton heavy duty service jack is ideal for auto repair services in the shop and garage. In addition, it is covered with 1-Year warranty from the date of the purchase..
Check Stock

American Lifting AL2300 Floor Jack 3 Ton - Professional Heavy Duty Hydraulic Car Truck SUV Service Jack Red

  • AL2300 is American Lifting 3 Ton heavy duty car floor jack that built with the strength and duability. It is assembled in the USA with USA and global....
  • Heavy gauge contruction, cast iron lift arm and the flanged side plates add the strength and rigidity. The large swivel saddle with the diameter of....
  • AL2300 service jack features in-line pump assembly assures long life and no off-center forces for ease in pumping, aligning and reduce wear. And, its....
  • Patented built-in by-pass device protects hydraulic system from over pumping damage. It also features the metered release system and U-Joint release....
  • This 3 Ton jack is ideal for auto repair services in the shop and garage. In addition, it is covered with 2-Year from the date of the purchase..
Check Stock

Omega Lift 30 Ton Jack Stands - Pin Style Stand with Heavy Duty Welded Steel - 4-Caster Spider Design with Handle for Easy Positioning - Extra Safety Great for Auto Repair Garage Shop (33300)

  • ...tand is constructed with sturdy welded steel construction for superior safety, durability, and strength. With the lifting range from 12-1/2 inches to 20-1/2 inches, it gives you the ability to handle a wide range of vehicles including small cars, SUVs, and trucks..
  • It features the pin-style jack stand mechanism. The heavy gauge extension tube with a 2-inch adjustable increment is designed for superior safety and helps prevent distortion or twisting. Ensuring the support bar is secured and nested across two corresponding radii before loading. Ensure that the support bar is inserted completely so that the bar stop engages the collar..
  • The car lift jack stand features a large saddle stand surface area for better contact with the load being supported, adding extra safety while working underneath a car. Four spring-loaded casters give you the ability for easily unloaded mobility. The handle allows you to position the saddle to the object effortlessly and safely under the vehicle. The built-in casters and the positioning handle helps pretect one's back and prevent back pain from lifting this heavy duty spider jack stands..
  • Omega Lift heavy-duty jack stands are tested for reliability and safety to meet or exceed ASME PASE 2014 Safety Standards. Ideal for home,....
Check Stock

Lippert Power Tongue Jack Electric Trailer A-Frame 3,500 lbs 18-Inch Stroke 5.4-Inch Foot Pad Durable Textured Casing Emergency Manual Crank Override 10.75 Retracted 28.75 Extended - 285318

  • EASY INSTALLATION — Complete with all necessary hardware and pins, installation for the Power Tongue Jack is fast and simple, so you can get to lowering and raising your equipment in no time.
  • TIME-SAVING — Say goodbye to cranking your manual jack. With the push of a button, you can raise or lower your a-frame trailer in a fraction of the time, without breaking a sweat.
  • INTEGRATED LIGHTING — Four integrated LED lights illuminate the ball and coupler, so you can operate your jack at night, worry-free.
  • POWERFULLY ENGINEERED — Built to do heavy lifting, the Power Tongue Jack has a 3,500 lb. lift capacity, helical-cut gears, 30 AMPs of power, and a 12V motor — all designed to get the job done, quietly and efficiently, so you don't have to.
  • BUILT TOUGH — Made from heavy-gauge, steel construction, a durable, textured housing that prevents chips and cracks, and a black powder-coat finish — this jack was designed to operate, day after day.
Check Stock

BIG RED ATZ220005R Torin Heavy Duty Pin Type Professional Car Jack Stand with Lock, 22 Ton (44,000 lb) Capacity, Red, 1 Pair

  • Professional heavy-duty jack stand: 22 Ton (44,000 lbs) capacity fits most vehicles.
  • 19.68" max lifting height and 12.79" min lifting height.
  • Strudy welded steel construction for superior safety and strength: Each jack stand is equipped with a large chassis design, which greatly increases the stability during use.
  • Heavy gauge steel frame to help prevent distortion or twisting.
  • Adjustable pin included: Designed to support column adjusts to different height positions.
  • Lift capacity is widely suitable for cars, sedans, trucks, SUVs, ATVs, UTVs.
  • Steel pin is secured to stand to prevent loss.
  • Durable and portable: High-quality steel and spray paint make the bracket more durable, with no rusting or breaking.
  • The handle is designed on the side for positioning and easy carrying.
  • No risk purchasing with high quality BIG RED automotive repair tools: Complies with safety standards for all products.
  • Contact our customer service for any questions and we will reply within 24 hours.
Check Stock

Weize 3500 Lb Power Tongue Jack Heavy Duty Electric Trailer Jack with 600D Polyester Protective Cover 23-5/8 Lift 12V DC

  • Durable and Sturdy: Heavy-gauge steel construction ensures durability and strength.
  • Black powder coat finish resists rust and corrosion.
  • Durable, textured-housing prevents chips and cracks..
  • Weize electric jack lets you raise and lower your A-frame trailer quickly and easily. 3,500 lbs. lift capacity, a low maintenance 12V DC electric gear motor. Provides 18” lift, retracted 9 inch, extended 27”, drop leg extra 5-5/8” lift. Outer tube dia.: 2-1/4", inner tube dia.: 2"..
  • To ensure great performance even at night, this jack also comes with a front-facing LED light .The light is directed at a downward angle allowing for easy deployment and retraction of the jack in low-light settings. The unit also comes with a manual crank handle in case you lose power..
  • Come with electric tongue jack protective cover: the cover measures 14″(H) x 5″(W) x 10″(D), it can work with most electric tongue jacks. 600D Polyester Fabric features high tear strength, that is durable and long lasting. Adjustable both-side pulling drawstring with barrel cord lock holds the cover securely in place, keeps your electric tongue jack dry and protects the casing, switches, and light from the elements..
  • Warranty: Meets international quality standards. 1 YEAR WARRANTY, don't h....
Check Stock

Mr. Pen- Rafter Square and Combination Square Tool Set, Black, 7" Square, 12" Aluminum Carpenter Square, Framing Square, Square Tool, Woodworking Square, Combo Square, 7 Inch

  • Package includes 1 piece of 12" combination square and 1 piece of 7" rafter square. The 12" combination square can be used as a level, depth gauge, and ruler, while the 7" rafter square can be used as a straight edge for marking and sawing..
  • 12-inch heavy-duty combination square ensures accuracy with its spring-loaded brass bolt. It includes a brass scriber and level while its stainless steel blade is precisely marked with inch and cm graduations in 1/16,1/8, and 1/32 Inch increments for your convenience..
  • 7-inch triangle square is perfect for use on the job site or at home.
  • this heavy-gauge die-cast billet aluminum alloy square fits easily into your pocket and comes with gradations to mark common, hip, valley, and jack rafters. The non-glare matte finish makes it easy to read in any light condition..
  • Mr. Pen 12" combination square is designed with a durable, rustproof stainless steel blade to last through tough job site conditions, while Mr. Pen 7" rafter square is made of heavy-gauge die-cast billet aluminum alloy construction that increases accuracy over laser-etched extruded stamped rafter ....
Check Stock

ABN 3-in-1 Electric 3-Ton Car Hydraulic Floor Jack, Tire Inflator Air Pressure Gauge, Impact Wrench Automotive Service

  • Inflator – Needle heads, 12V cigarette lighter fuse, six-angle spanner.
  • 12V DC input, 35L/min inflating speed, 10A max current, 150 PSI (10 BAR) max pressure, 23.6in (60cm) air hose length.
  • SIMPLE STORAGE: Extremely heavy-duty 15.5” x 7” x 15” inch (39.4cm x 17.8cm x 38.1) plastic blow-molded carrying case for easy transportation, safe storage, and quick organization.
  • Includes traction strips on backside so the case will not slide around in the trunk.
  • CONTENTS: Package includes (1) 2-in-1 electric jack, (1) electric impact wrench, (1) safety hammer, (1) battery clamp connecting cable, (2) gloves, (1) power cable, (2) socket adapters, (2) fuses, (2) instruction manuals – one for jack and one for wrench, (1) carrying case.
Check Stock

(2) JBL Pro JRX212 12\ 2000w Professional Passive PA/DJ Speakers 8 Ohm JRX 212

  • ...JBI Pro JRX212 12" 1000 Watt 8 Ohm Passive PA/DJ Speaker. JBI 12 in low frequency driver with a 64 mm (2.5 in) diameter edge wound ribbon voice coil. JBI 2414H-C 25 mm (1 in) polymer diaphragm compression driver. Advanced network topology crossover design.
  • High-voltage capacitors and inductors with massive cores and heavy gauge wire. Progressive Transition high frequency waveguide. 19 mm (.75 in) MDF (Medium Density Fiberboard) enclosure. SonicGuard protects the high frequency driver from excess power without interrupting the performance..
  • Non-resonant, all-steel handles. 18-gauge hexagon perforated, steel grille Dual-angle pole-mount socket allows the speaker to tilt 10. Specifications: Power Rating : 250 W / 1000 W. Frequency Range (-10 dB) : 60 Hz - 20 kHz. Frequency Response (3 dB) : 80 Hz - 18 kHz.
  • Sensitivity (@1m) : 98 dB SPL (1w/1m). Nominal Impedance : 8 ohms. Recommended Amplifier Power : 250 W to 500 W into 8 ohms. Maximum SPL : 128 dB. Nominal Dispersion : 90 x 50. Crossover Frequency : 2.1 kHz. Dimensions (H x W x D) : 584 mm x 399 mm x 325 mm (23 in x 15.7 in x 12.8 in).
  • Weight : 19.5 kg (43 lb). High Frequency Driver : JBI 2414H-C 1" exit compression driver mounted on Progressive Transition Waveguide. Low Frequency Driver : JBI M112-8. Inp....
Check Stock

(2) JBL JRX215 1000w 15" DJ P/A Speakers+(2) 18" 1400w Subwoofers+Powered Mixer

  • Package Includes: (2)JBI Pro JRX215 1,000 Watt 15" Inch 2-Way Passive DJ P/A Speaker Cabinet - NEW!. (2)JBI Pro JRX218S 1,400 Watt 18" Inch Compact Passive Subwoofer DJ Sub. (2)RockvilIe RSP36 36" Mounting Pole from Subwoofer to Speaker, Heavy Duty Steel. (1)RockvilIe RPM1470 14 Channel 6000w Powered Mixer w/USB, Effects/14 XDR2 Mic Pres. : JRX215 15" Two-Way Sound Reinforcement Loudspeaker System. JBI 15 in low frequency driver with a 64 mm (2.5 in) diameter edge wound ribbon voice coil.
  • JBI 2414H-C 25 mm (1 in) polymer diaphragm compression driver. Advanced network topology crossover design. High-voltage capacitors and inductors with massive cores and heavy gauge wire. Progressive Transition high frequency waveguide. 19 mm (.75 in) MDF (Medium Density Fiberboard) enclosure. SonicGuard protects the high frequency driver from excess power without interrupting the performance. Non-resonant, all-steel handles.
  • 18-gauge hexagon perforated, steel grille Dual-angle pole-mount socket allows the speaker to tilt 10. Details: Power Rating : 250 W / 1000W. Frequency Range (-10 dB) : 41 Hz - 18 kHz. Frequency Response (3 dB) : 59 Hz - 13 kHz. Sensitivity (1....
Check Stock

APlusLift MT1500 1,500LB Air Operated 24' Width Motorcycle Lift Table (Free Service Jack, Free Home Delivery) / 24 Months Parts Warranty

  • Exceptionally Durable E-Coated Black Paint Finish.
  • Durable Powder-Coated Orange Paint Finish.
  • Stable Scissor Frame with Precise Pivot Shafts and Thick Gauge Steel.
Check Stock

10/3 Contractor Grade 10 Gauge Extension Cord 100 ft Outdoor Heavy Duty Indoor Outdoor SJTW Lighted Outlet Extension Cord America Style (100 ft 10 Gauge, red Extension Cord)

  • 10 3 extension cord 10 Gauge commercial extension cord 100 foot 10 AWG Copper Lighted Multi Outlet Grounded 10/3 Extension Cord 100 ft 3 prong heavy duty 10 Gauge extension cords, perfect cord for all around use.Heavy duty outdoor jacket that is water resistant for added protection against moisture Flame resistant. extension cord 100 foot 10 awg extension cord 100 ft.
  • HEAVY DUTY outdoor jacket 10 3 extension cords Rated up to 1875 Watts, 10 gauge extension cord for generator 100ft jacket extension cords 10 gauge Heavy duty electrical cord 10 Awg 3 wire cords are designed to give you 125VAC 15amps or 1875 watts jacket that is water resistant for added protection against moisture 10 3 extension cord extension wire heavy duty for appliances Perfect for large tools and appliances such as a hammer drill, multiple drills, and large heater.
  • 10 ga extension cord 100 ft Indoor/Outdoor Cord for power equipment molded on 15A-125V plugs and connectors.10 gauge extension cord heavy duty 100 ft extension cord 15 amp extension cord 10 3 extension cord 100 ft.
  • 10 gauge extension cords red extension cord indoor 5/8" strain reliefs in back of plug and connectors prevent ends from pulling away from cord body. extension cord power strip extension cord 100 ft extension cord....
Check Stock

Bestauto Bottle Jack 50 T Car Jack Hydraulic Floor Jack 110000LBS with Pneumatic & Manual Hand Pump Air Jack Heavy Duty Auto Truck Repair Lift

  • Air/Hydraulic Bottle Jack: VEVOR 50 tons/110231 lbs bottle jack is ideal for large size and heavy-duty applications. It integrates a pneumatic jack with a hydraulic jack into this one car bottle jack. It is ideal for lifting heavy-duty machinery, industrial construction equipment, farm vehicles, and more..
  • 6-3/10" Lifting Range: With its powerful pneumatic and hydraulic power, our bottle jack can lift a maximum of 50 tons/110231 lbs and has a lifting range of up to 10-1/2 in/27 cm to 17 in/43 cm..
  • Labor-saving Dual Operation: Working pressure range: 120 psi-200 psi. With high-strength air tube, the enhanced compressed air lift with reinforced seal can ensure your security. Manual lifting is also possible with the splicing handle. The design allows the jack to work securely even without power..
  • Considerable Details: With two big wheels and a portable handle, the bottle jack is not trouble when it comes to movement and splicing handles also mean that the storage is easy..
  • Heavy-Duty Steel Structure: This pneumatic bottle jack is constructed of heavy-duty steel for maximum durability. The serrated saddle provides a spacious lifting area. The wide and thick base provides stable support and security. With our bottle, there is nothing to worry about..
Check Stock