Reviews Heavy Duty Threaded Rod

Panther Marine 55-2600 Auxiliary Motor Steering Kit - Stainless Steel

  • Brand New RockJock Jeep TJ/LJ/XJ/MJ/ZJ Currectlync Steering System (Part #CE-9701).
  • Compatible with: 1997-2006 TJ/LJ Jeep Wranglers, 1984-2001 XJ Cherokee, 1993-1998 ZJ Grand Cherokee, 1985-1992 MJ Comanche.
  • The RockJock Currectlync heavy duty tie rod and drag link system for TJ, LJ, XJ, MJ and ZJ vehicles features, a 1 1/4″ diameter forged alloy drag link, and 1 1/4″ solid alloy steel tie rod bar that is bored and threaded on the ends. All 7/8″ thread tie rod ends with boots are included as well as the RockJock heavy duty steering stabilizer bracket..
  • This unit is a direct replacement for the stock parts. No modifications or machining to any part of the vehicle is necessary. This unit is rated at 200% stronger than the stock components..
  • NOTE: This unit is designed to be used on vehicles with 4″ of lift. It can be used on vehicles with less lift, but the vehicle must have a minimum of a 2″ bump stop (over stock). Also, on vehicles with no lift, 2 of the tie rod ends may need be trimmed to achieve proper adjustment..
Check Stock

Chromex Chimney Cleaning Set - 8 Piece - 24 Foot Fiberglass Chimney Rod and 6 Inch Chimney Brush

  • Chromex 8 Piece - 24 Foot Fiberglass Chimney Rod Kit with interlocking threaded ends. Polypropylene 6 Inch chimney cleaning brush with steel center....
  • Heavy duty steel 1/4 Inch threaded fittings - Compatible with our Chromex chimney brush and all standard chimney brushes that use this size connector.
  • 8 - 3 Foot - 55 mm - strong fiberglass rods designed to absorb pressure but also flexible enough not to break..
  • Galvanized steel stem - Heavy duty twisted spiral stem for long-lasting use. 1/4 steel NPT fittings which work with our chimney rods as well as any....
  • ChromeX manufactures thoughtful tools and accessories for both the do-it-yourselfer and the professional. Customer satisfaction is our main priority,....
Check Stock

ATPEAM Macpherson Strut Spring Compressor 2pc Heavy Duty Coil Spring Compressor Strut Remover Installer Tool, 13/16in Socket 1/2in Drive

  • For Most Vehicles: Align the hooks with the safety pins backed off, position both set of hooks, opposite each other, tighten the threaded rod with even pressure on both sides, then remove the fastener nut holding the cartridge. This heavy duty coil spring compressor repairs bent and damaged parts and performs the necessary suspension maintenance on the macPherson struts and springs found in most small and medium-sized cars.
  • Heavy-Duty: This heavy duty strut spring compressors is made of strong carbon steel, and black anodic oxidation coating to prevent rust and corrosion, high durability and corrosion resistance under even punishing use, constructed with forged hooks and center screw hardened for maximum strength and longevity, designed to withstand extreme pressure in any environment, ideal for professional mechanic and automotive repair.
  • Safe & Stable Grip: The wide end pieces lock on to your coil springs quickly and easily and keep a secure hold as you work, with locking pins offering additional security and precision, hex-shaped end for a 13/16-inch wrench or socket and allows a 1/2-inch extension for adjustment if the strut is too close to the tool, 11.5-inches threaded rods for 10-inches to 10.5-inches maximum opening to fit jaws to coils.
Check Stock

ROJOSER Heavy Duty Canopy Kit and 3.2 feet Pendant Light Fixture Chain for Chandelier or Swag Light Fixtures,Vintage Black

  • 【Package includes 】1 pcs 5''base plate canopy kit with crossbar, mounting screws, threaded rod, screw collar loop, 6 Feet black heavy duty chandelier chain, 2 connection locks. (NOTE: Not include grounding wire).
  • 【Canopy kit】5 Inch diameter steel canopy with standard 1/8 IP threaded pipe (9/32" inside dimension) with nessessary mounting hardware. The kit includes a full collection of hardware for installation, Also, we provides user manual for your easy to use..
  • 【Heavy duty chain】6 feet chain, 0.15 inch wire diameter, supports to up to 50 lbs. Nice finish and heavy build, durable and rust resistant. The length of this chandelier chain is adjustable, more flexible for your use..
  • 【Wide Application】This chandelier hanging kit is great for turnning a plug light into hardwire, using the center loop and mount to canopy with retaining ring. There are no visible side screws and you can use it as a pendant lamp hook, decoration hanger, lantern hook. Perfect with indoor light for Hallway, Restaurant, Foyer, Bar, Living Room, Cafe and so on..
  • 【Purchase with Confidence】ECUDIS makes and sells easy to use products, if you have any questions about our ceiling canopy kit please contact us..
Check Stock

Samfox Quick Detach Sling Swivels, mossberg 500 accessories Non Tri-Lock Sling Swivels Compatible with Mossberg 500

  • The quick release sling features a unique quick release design. It can effectively prevent the steel rotating body from contacting g/u/n. High hardness and corrosion resistance. Strong practicality. Very flexible..
  • The sling swivel is made of high-quality steel. Long service life, smooth and quiet operation. It can ensure high performance in use and has excellent anti-aging ability..
  • The stock has a threaded swivel rod and the nut has a front rod. Installation is quick and easy. After rigorous quality testing, it is durable. The operation is safer and more convenient..
  • The super heavy duty rotary joint adopts humanized design with low failure rate. Can withstand years of heavy duty outdoor use. High-quality products ensure a long service life and a good sense of use..
  • The washers included with the non-triple lock sling swivel ensure a secure and snug fit without scratching. Provides excellent performance and reliability when in use..
Check Stock

B&P Lamp® Heavy, Antique Style Cast Brass Canopy Kit, 5 1/2" Diameter

  • 5 1/2 Inch diameter Heavy, Antique Style Cast Brass Canopy Kit.
  • 5-1/2 inch diameter X 3-3/8 inch deep canopy- SUPER HEAVY DUTY.
  • Comes with screw collar loop and all mounting hardware.
  • Crossbar, mounting screws included, threaded rod is 1/4IPS lamp thread.
Check Stock

LS1 Harmonic Balancer Installer Crank Pulley Installer Crankshaft Installation Tool For GM LS1/LS Engines 1997~Current

  • Great Compatibility — Works on all GM LS & LT series engines 1997-current (Gen 3, 4, & 5)..
  • Upgrade Design — Simply thread the tool into the crankshaft until it seats, then tighten the nut down until the pulley is seated. This is a must have for engine swaps or upgrading the balancer..
  • Special Features — Includes 1×Threaded Rod, 1×Flange Nut and 2×Washers. Threaded rod is hardened 94 Rockwell and hardware is grade 10.9..
  • Superior Quality — Premium grade heat-treat heavy duty steel, galvanized steel nuts and aluminum washers, durability, anti-corrosion and anti-rust. High precision and hardness to provide a much longer service life..
  • 100% Satisfaction Guarantee — If you're not 100% satisfied with our tools, simply return it for a full refund in 30 days. Support 12 months’ Warranty. Professional & Sincere Service allows you to take no risks to purchase in E-cowlboy!.
Check Stock

Arcan 1500-lb. Capacity, Heavy Duty Engine Load Leveler (ALEL15)

  • HEAVY DUTY: 1, 500 lb. working load capacity accommodates most engines..
  • SUPPORT CHAINS: Two chains at each end support the load and help to transfer the weight safely..
  • ONE HANDED CRANK: Allows you to easily reposition and redistribute the load..
  • ADJUSTMENT ROD: Acme threaded adjustment rod allows for easy adjustment of the load..
  • VERSATILE: Easily adapts to many engine hoist models to enhance their operation..
  • COMPLIES WITH ASME PASE-2019 SAFETY STANDARD: We put all our lifting equipment through voluntary and rigorous third party safety testing to ensure our products are among the safest in the market..
Check Stock

Westbrass 2' Kitchen Sink Hole Cover, Powder Coat White, D202-50

  • Low profile easier to clean than deck plates.
  • Reversible washer fits thin or thick sinks.
Check Stock

Westbrass 2' Kitchen Sink Hole Cover, Matte Black, D202-62

  • Low profile easier to clean than deck plates.
  • Reversible washer fits thin or thick sinks.
Check Stock

Tech 12” Bolt Cutter Compound Action Wire Cable Chain Comfortable Grips Snips Hand Tools

  • Compound action and heavy-duty alloy steel jaws can cut through bolts, threaded rod, wire, mesh, chain links, wire fence, and more..
  • 0.6 inch (15.3 mm) maximum opening can handle 0.5 inch (12.8 mm) thick material. Depth-of-cut adjustment screw..
Check Stock

HOSKO 1-Inch Window Curtain Rod Set - for Window 30-44 Inches - Including Two Mounting Brackets (Black）

  • 【Sectional Connection Curtain Rods】 HOSKO black curtain rod comes in different pieces, curtain rods for windows between 30 to 44 inches. Please measure your window size before purchasing.
  • 【Robust and Sturdy】 Rod for curtains project 2” from the wall. Made with sturdy steel for long-lasting use. Heavy duty curtain rods with threaded joints need only be spliced with each other, no professional installers are needed..
  • 【Perfect Window Solution】 The black metal curtain rod is a simple and stylish design. With a small silvery ball on either end for a minimalist look that makes it suitable for any room in your home and décor styles..
  • 【Package Includes】 1-inch curtain rods kit contains everything that you will require when installing window curtain rods: 2 rods with finials, 1 middle rod, 2 brackets, 4 screws, 4 anchors.
  • 【100% Customer Satisfaction】 Please be assured of the purchase! With our 100% risk-free satisfaction guarantee, you can rest assured you will be refunded if our small curtain rods don’t suit your needs..
Check Stock

HYDDNice 5 Spoke Stainless Steel Boat Steering 13-1/2\ Dia Wheel Keyed to fit Standard 3/4\ Taper Shafts (13-1/2\)

  • 【Compatibility】: Outboard motor steering rod, perfectly fit for Yamaha 30‑60HP. Conform to strict quality control standards, dependable to use. Overall Dimensions: 11 1/2" long 1/2" dia. Mount: 3/8" OD threaded mounting bolt. One end has a ball joint ..
  • 【Premium Material】: Outboard Motor Steering Rod ia made of the Heavy‑duty stainless steel material, antirust, anti‑corrosion and durable and wear‑resistant, has long service life. which make sure work well for a long time..
  • 【Precise manufacturing】: Outboard Motor Steering Rod with Precise manufacturing technology, provides high reliability and high performance. It come with precision gasket , screws and washers. Sophisticated production, can be used for a long time, has stable performance, high reliability..
  • 【Easy to Install】: Steering Link Lever Tie Rod End Set is easy to install, no complicated tools required, convenient to use. Ideal replacement for old or damaged outboard motor steering rod..
  • 【Best Experience】 :We strive to provide you with the best quality products and the best customer experience.We try our best to meet your requirements.Please check the product information carefuly berore buying yo aviod making mistakes..
Check Stock