Reviews Heavy Duty Structural Bolt

STI HD4 Wheel (Front/Rear / 14X7 4/156 4+3) (Gloss Black Machined) Compatible with 14-20 Polaris RANRZR1000XE

  • Like all STI HD Alloy series wheels, the lightweight HD4 comes with a no-hassle Lifetime Structural Warranty, thanks to its unique inner and outer heavy-duty wheel lip reinforcement..
  • The HD4 is both a beauty and a beast, boasting 1000-pound load ratings for the 14-, 15- and 17-inch models.HD4 wheels are available in a striking gloss black finish with machined accents, chrome bolts and rivets, and a high-gloss clear coat seal..
  • The newest model in the HD4 line is made with a matte black finish.Heavy-duty wheel lip reinforcements - inner and outer.12-inch up to 17-inch sizes.Strength proven with Lifetime Structural Warranty.1000-pound load ratings can handle largest vehicles.Note.
  • lug torque specifications for all applications.Wheel Specifications:Wheel diameter (inches): 12.Wheel width (inches): 7.Bolt pattern: 4/110.Wheel offset (Inside + Outside): 2+5 (-47 mm)..
Check Stock

Zoeller 284-0004 Non-Automatic Cast Iron Single Phase Submersible Sewage/Effluent Pump

  • Pumps up to 4800 gallons per hour,, pumps water up to 25 vertical feet.
  • 1/2 HP Cast Iron Sewage Pump with Vertical Float Switch.
  • 19 in. x 30 in. 30 gallon structural foam basin, 4 In. rubber inlet hub fits DWV schedule 40/80 pip, 2 In. discharge and vent, built-in torque stops.
  • Premium structural foam cover with 8 bolt configuration, air tight molded reusable PVC seal.
  • Check valve features, heavy duty rubber boots, stainless steel clamps, full flow design, 2 in. connections.
Check Stock

AMERICAN MUTT TOOLS Mini Bolt Cutter 8 Inch | High Strength Small Bolt Cutter | Heavy Duty Bolt Cutter for Cutting Fencing, Barbed Wire, Nails and Screw Cutter | Compact Bolt Cutter, Wire Fence Cutter

  • Like a Hot Knife Through Butter: The 8 inch bolt cutters heavy duty compound leverage design helps you effortlessly cut through bolts, chain, nails, rod and wire up to 3/16" in diameter..
  • Ergonomic: Give your hands the break they deserve. Our barb wire cutters ergonomic handle design helps eliminate fatigue from extended use. The fishing bolt cutters set also easily fits into most tool pouches..
  • Built To Last: The metric bolt cutters small heavy duty cutting heads undergo a specialty heat treatment process which allows these handheld bolt cutters to cut just as cleanly the 100th time as they did the 1st time..
  • Heavy Duty: Made from precision forged alloy steel, this mini bolt cutters heavy duty works just as hard as you do. Our barbed wire cutters use compound leverage to allow you to slice through steel wire with just one hand..
  • Limited Lifetime Manufacturer Warranty: This fence wire cutters heavy duty is backed by the American Mutt Tools Limited Lifetime Warranty for your complete peace of mind. Our folding bolt cutters are professionally made in China..
Check Stock

1/2 x 6” 25-Piece Black Lag Bolts Rustproof 4-Layer Ceramic BLAKOTE 2X Protection of Galvanized Lag Screws for Decks Pergolas by Makers Bolt

  • Secure Exterior Structural Wood - Ideal for deck wood, exterior plywood, and other marine grade plywoods, our heavy-duty lag screws make wood-to-wood fastening a breeze. Each pack comes with 25pcs of ½” diameter hex screws..
  • 2x Corrosion Protection - These lag bolts for wood are made of an exterior grade 4-layer black ceramic coating called Blakote. With twice the protection of standard galvanized wood screws, they won’t tarnish after exposure to highly corrosive environments..
  • Better for Outdoor Applications - Our structural screws have a black matte finish. They’re tougher for outdoor wood projects than our black oxide finish..
  • Comes in Different Lengths - Use these construction wood screws on decks, gazebos, trusses, and other wood connections. Our lag bolts are available in 1/2" diameter and in lengths up to 8”..
  • Uniform Heads and Precise Threading - Makers Bolt screw sets are specially manufactured under tight tolerance, ensuring precision and uniformity in production..
Check Stock

Raceline Wheels 991B ASSAULT Wheel Black 17X9 6X135 Bolt Pattern +25mm Offset/ 6 B/S 8 Spoke Aluminum Passenger Car Wheels Full Size Replacement Black Car Rims

  • RACELINE ASSAULT WHEELS: Contemporary 8 spoke design with smooth deep lip feature constructed out of heavy duty A356 aluminum..
  • MILLED LIP: Milled lip adds to wheel design contrast. Raceline automotive wheels pass or exceed all DOT standard load ratings..
  • AVAILABLE IN 2 COLORS: Available in both Satin Black and Chrome finish and also available in 16” to 20” diameters. Hub centric fitments available....
  • BOLT ON CAP: Bolt on cap with contrasting embossed Raceline logo. Includes a Lifetime Structural Warranty (limitations may apply), The Official Wheel....
  • RACELINE: Raceline is a market leader in the design and manufacturing of wheels for off-road, street and track use. Founded more than 20 years ago as....
Check Stock

ECOTRIC 1/2\ 3/8\ Thick Steel Quick Tach Attachment Mount Plate Skid Steer Adapter Bobcat. with One Year Warranty (3/8\)

  • 【Description】 ECOTRIC thick mount plate can easily weld or bolt onto plows, forks, or any attachment that you want to convert to quick tach hookup. Fits skid steers with the universal quick tach mounting system and tractors with the skid steer style quick tach..
  • 【Features】 *One Year Warranty! *Ease to weld Made from Grade 50 structural steel *Condition: 100% Brand New *Material: Heavy Duty Steel.
  • 【3/8" Specifications】 Weight: 53 lbs ,Outside width: 46" Inside width: 45" ,Height: 18.5" ,Top bar: 3/8" thick, Plate: 3/8" thick.
  • 【1/2" Specifications】 Weight: 68 lbs,Outside width: 46.
Check Stock

vikofan 8 Pcs Workbench Bracket kit Shop Table Sturdy Steel Bracket Kit Workbench Corner Brackets with Screws

  • The workbench bracket can help you work out of building your own work bench..
  • Material: The workbench bracket kit made of heavy duty 3/16 inch thick structural steel.Coated with black powder.(Prevent rust and corrison).
  • Design:The workbench brackets ensure that the legs and top will be parallel, plumb and square..
  • Package Included:8 Pcs Workbench Bracket（8 brackets to build a bench any length, width or height you want while assuring the bench will be square and plumb.）,Screws and Instruction..
  • Easy to install:Add lumber or steel legs, and a wood or metal work surface, then bolt or weld it together.(Specific reference installation instructions).
Check Stock

Eacker Cable Cutter Wire Rope Heavy Duty Stainless Steel Aircraft Up to 3/16 for Deck Railing Strong Thick Seal Metal Fence Bicycle Brake Cutter with Wire Rope Aluminum Sleeve

  • 【High Quality Cable Cutter】This cable cutter is made of 50CR alloy structural steel, the hardness reaches HRC-58-63. Suitable for various mechanical maintenance. Cutting range is up to 3/16 (5mm) stainless steel wire rope, up to 3/16 (5mm) hard steel wire, up to 3/16 (5mm) aviation cable..
  • 【Cutting Sharp But Safe】Serrated cutting edge, the blade width is 6mm, and the depth is 11mm. The cutting is fast and smooth, and it can cut single-strand or multi-strand iron wire, spring steel wire, etc. The cross-section of the cut steel wire is flat and will not appear loose. The wire rope cutter is equipped with a safety lock to prevent accidental opening and prevent injury..
  • 【Ergonomic】The handle is dipped in plastic, which feels comfortable and non-slip and oil-resistant. The handle line is suitable for one-handed operation, which not only saves effort, but also has higher shear strength. Telescopic spring design, easy to carry, suitable for beginners..
  • 【Wide Applications】The hard wire cutter is widely used in industrial and household applications, such as cable railings, fencing, bicycle brakes and other DIY projects. Heavy duty cord cutters are also ideal park tool cord cutters, bicycle cord cutters, bicycle cord cutters, bx cord cutters, truc....
Check Stock

18\ Heavy Duty Cane Bolt Drop Rod Gate Hardware for Wood Fence Gate Ground Latch for Wooden Gates Holding Doors, Hard Steel, Black

  • 【STURDY AND DURABLE】Heavy Duty Cane Bolt Drop Rod made of thicken gauge black steel and won’t break or buckle. With black powder coated, anti-rust, and with excellent corrosion resistance. This wood fence gate rod could last for long life outdoors, withstand bad weather. Widely used on wooden fence gates, metal gates, iron gates, vinyl gate or double gates, doors, etc..
  • 【HEAVY DUTY】Designed for using on heavy duty gates, fences, and doors. The gate drop rod is thicker than similar cane bolts on the market. 18"length rod is able to stay deeper and more secure ground penetration to hold a heavy gate firmly in place. Suitable for anti-theft and reinforcement of the gate..
  • 【KEEP GATES SECURE】 Drop pin keep your gates stable. Our canes bolts are designed to secure your single or double doors, gates, and fences in the open or closed position. Protect your gate from moving around in the wind and the hazards that movement can present..
  • 【CONVENIENT USE】Just turn the rod manually to slide down through the holes of the brackets and put it into the ground, to keep your gate or fence in a stable position. When not in use, place bolt on the bolt retainer..
  • 【EASY TO INSTALL】This heavy duty gate drop Rod includes one sugarcane bolt, three fixe....
Check Stock

SMOOTHERPRO Bolt Action Pen Decent Stainless Steel Compatible with Pilot G2 Refill Durable Stainless Steel Clip for EDC Pocket Design (SSG050)

  • ...ble with Pilot G2 Gel Refill, which provide you an excellent writing experience with gel refill and also, the refill is easy to get online and supermarket. The pre-installed refill in this Pen is G2 Gel Fine Point Refill, line size 0.5mm..
  • Finely CNC machined body and threads for decades of use, a decent inexpensive heavy duty metal pen with Stainless Steel Clip for your own use or give to friends or family as pen gift. Well buffed to avoid potential cut during your EDC use with unsurpassed quality control..
  • Constructed with heavy weight full metal stainless steel 316 grade solid bar.
  • unbreakable body with balanced weight for writing and holding. Extra weight is ideal to be used in tremor arthritic hands, excellent writing aid for elderly, carpal tunnel, parkinson’s and other people who need a heavy duty pen. Elegant and great looking design, suitable for both men and women..
  • Ideal metal gift pens for mom, dad, brother, sister, son, daughter, boss, schoolmate, girlfriend, boyfriend, worker, broker, teacher, clerk, lawyer, teacher, brainworker and whoever else you care about because this is an everyday carry pen with beautiful finish and heavy duty. It comes with a high quality gift box..
Check Stock

Hooke Road F150 Offroad Steel Front Bumper w/Winch Plate Compatible with Ford F-150 2004 2005 2006 2007 2008 Pickup Truck

  • 3-piece design full-width front bumper for Ford F150 2004 2005 2006 2007 2008. Not Compatible with Factory Sensors. Easy bolt-on installation. No drilling required..
  • Rugged off-road look. Fully-welded D-Ring mounts with 4.75-ton capacity. Built-in winch plate rated up to 12000 lbs..
  • Bumper weight about 145 lbs. Heavy-duty 11-gauge(1/8 Inch) steel for the bumper main body, 8-gauge(11/64 Inch) for the structural connection plates and winch plate..
  • Textured black powder coat finish & Premium E-coating process for 5-year corrosion protection under normal use..
  • Order will be shipped in 2 packages. Included Front bumper assembly.
Check Stock

New 1/2 Skid Steer Mount Plate Quick Tach Attachment Loader Plate Compatible with Bobcat Kubota with One Year Warranty

  • The 1/2" thick mount plate can easily weld or bolt onto plows, forks, or any attachment that you want to convert to quick tach hookup. Specially designed for use on heavy duty items like concrete breakers or stump buckets and other HD attachments..
  • Material: Made from Grade 50 structural steel. It is sturdy enough to handle heavy workloads. When the load is too heavy, you don't have to worry about the plate bending..
  • Using the mount plate, you can add custom attachments. Its skid steer style construction makes it easier to connect pallet forks, plows, grapples, and other parts. If you want to quickly complete the work in the yard, such as transporting waste, clearing debris, or plowing snow, these tedious tasks, you can use your tractor with our mount plate to help you. It will bring you a great experience and a good mood at work..
  • One Year Warranty. If you didn't receive any replies from us for more than one business day, please check your spam because we will reply to every message our customers send and maybe our messages were sorted to spam, thank you very much..
Check Stock

HOXWELL Premium 2 pcs Heavy Duty Wheel Tire Chocks, Vehicle Chocks with Eyebolt for Travel Trailers, Camper, Truck, Car and ATV 2 Pack Orange

  • 【Material】Wheel Chocks are made of heavy-duty structural polyfoam, can be used with heavy equipment, lightweight and durable. All-weather construction makes for reliable performance in any climate and treaded grips works on slippery surfaces..
  • 【Easy to Carry】The wheel bearing housing includes a built-in steel eye bolt, which is used to connect chains or ropes to facilitate positioning and disassembly of the travel trailer wheel set..
  • 【Visible Color】The highly visible orange color makes it more likely to be seen and removed before driving off and also makes it easy to be backed into..
  • 【Multifunction Models】These wheel chocks can be used for a wide range of purposes, perfect for chocking cars, trucks, trailers, small airplanes, RVs, dumpsters, boats, vans, and more to prevent your vehicle from rolling away..
  • Weight (2 Pack): 5.9 Lbs, these professional-grade wheel chocks are great for helping you park your car..
Check Stock