Reviews Heavy Duty Office Chair Gas Lift Cylinders

FICMAX Big and Tall Office Chair Ergonomic Executive Chair PU Leather Chair Lumbar Support Modern Computer Desk Chair Comfy Work Chair - with Flip-up Armrests Spring Cushion (H1-Black)

  • ...Please measure the dimensions before purchasing).
  • HEAVY DUTY CLASS 4 PISTON - STRONGEST ON THE MARKET: Our office chair cylinder passed the top-level test of BIFMA and TUV certification, the highest End Class 4 chair piston on market, which are known as the most durable, longest lasting, and highest quality gas lift cylinders, they can lift up and down 120,000 times without fail and can be support up to 1000lbs..
  • 5.5’’ PISTON STROKE FOR ADJUSTING CHAIR HEIGHT: This desk chair cylinder extends from 285mm to 425mm ( 11.22 - 16.7"), minimum length: 11.22 inches.
  • maximum length when fully extended: 16.7 inches, allows you travel from the highest to the lowest point. Replace your office chair gas cylinder and stop worrying about disturbing anyone, 360 degree rotation to all directions, freely lift and rotate your office chair smoothly and quietly..
  • EASY INSTALLATION & 100% WARRANTY: It comes with gloves and chair cylinder, spending 5 minutes will bring a new life to your old office chair. Your satisfaction is always our top priority. If for some reason the cylinder fails, leaks, or starts sinking, contact our professional after-service team via email, our direct after-sale team will reach out to you and timely solve your problems..
Check Stock

Lumbar Support Pad for Herman Miller Classic Aeron Chair Office Home Seating - Graphite/Black - Size C

  • Hardware repair kit for office chair gas lift cylinders.
  • Contains: 1 Rubber Bumper, 1 Silver Washer, 2 Black Washers, 1 White Bearing Pack, 1 Retaining Clip.
  • Attachment hardware for lower area of office chair gas lift pneumatic cylinder.
  • These parts fit the large majority of standard gas lift cylinders in office chairs - Most but not all.
  • Note: Gas lift piston in picture is for visual purposes only and is not included. Only the hardware kit is included..
Check Stock

Heavy Duty Replacement Office Chair Swivel Tilt Control Seat Mechanism w/ 6\ x 10.2\ Mounting Holes - S2979-HD

  • Heavy duty replacement office chair tilt mechanism with 10.2" long x 6" wide screw mounting hole pattern.
  • Single lever for gas cylinder height activation - Accepts standard tapered gas lift cylinders.
  • Tilt control - push lever in to lock tilt, pull out to unlock.
  • Twist hand wheel to tighten or loosen (adjust) backward tilt tension.
Check Stock

The Office Oasis Chair Cylinder Replacement with Removal Tool, Standard Size

  • ★ INDUSTRY STANDARD SIZE - This pneumatic piston cylinder will fit almost every office chair on the market including herman miller aeron. If it doesn't fit your specific chair, return it for a full refund and we'll even cover the cost of shipping for you..
  • ★ EXTRA HEAVY DUTY - Our desk chair cylinders are all Class 4, which are known as the most durable, longest lasting, & highest quality hydraulic gas lift cylinders. Cheaper options can start sinking within the first few months of use. Our's don't. They can even support up to 1000 lbs without fail..
  • ★ LIFETIME WARRANTY - Our goal is to provide you with the highest quality office chair parts so you can extend the life of your chair. So if for some reason our cylinder fails, leaks, or starts sinking - email us, and we'll send you a brand new one. Our warranty has no expiration date..
Check Stock

MySit 2.2" Stroke Office Chair Gas Lift Cylinder Replacement, Heavy Duty 450lbs Shortest Gas Spring Rod Chair Part Sinking 1.2 inches Universal Size Black for Short Person, Class 4

  • CLASS 4 LEVEL GAS LIFT CYLINDER -- This heavy duty gas lift cylinder made with high construction industry standard (BIFMA Plus Qaulity) for short person..
  • ADJUSTABLE HEIGHT 2.2 INCH -- Adjustable Height 2.2 Inch, the fully expanded height is 10.7 inch, the fully compressed height is 8.5 inch, which suitable for short person..
  • HEAVY DUTY 450LBs CHAIR PISTON -- MySit office chair gas lift cylinder holds up to 450lbs for most office chair, executive chair, computer chair, gaming chair..
  • REPLACEMENT PARTS FOR MOST OFFICE CHAIR -- Universal size replacement for most of office chair cylinder, executive chairs cylinder, full 360 degree rotation, smooth and without noise move to all directions..
  • EASY TO INSTALL -- You can installed easily without additional screws required, fix your sinking office chair by this standard size replacement chair piston instead of purchasing a new chair..
Check Stock

Heavy Duty Replacement Office Chair Base - 28\ Aluminum - S4164

  • Heavy Duty 28" Polished Aluminum Chair Base.
  • Standard 2" (50mm) center hub hole to receive standard 2" gas lift cylinders.
  • Standard 7/16"x7/8" (11mm x 25mm) sockets to receive standard chair caster stems.
  • HD - Built to hold more weight and withstand more than standard chair bases.
Check Stock

Duramont Office Chair Gas Lift Cylinder Replacement - Universal Size Fit All - Heavy Duty - Includes Removal Tool, Instructions & Gloves

  • INDUSTRY STANDARD SIZE – This pneumatic piston cylinder will fit almost every office chair on the market. If it doesn’t fit your specific chair, return it for a full refund and we’ll even cover the cost of shipping for you.
  • EXTRA HEAVY DUTY & THE BEST ON THE MARKET – Our desk chair cylinders are all Class 4, which are known as the most durable, longest lasting, & highest quality gas lift cylinders. Cheaper options can start sinking within the first few months of use. Our’s don’t. They can even support up to 1000 lbs without fail.
  • 6 YEAR HASSLE-FREE WARRANTY – Our goal is to provide you with the highest quality office chair parts so you can extend the life of your chair. So if for some reason our cylinder fails, leaks, or starts sinking – email us, and we’ll send you a brand new one. Our warranty lasts for up to 6 years from your purchase date.
Check Stock

Lumbar Support Pad Replacement for Herman Miller Classic Aeron Chair Office Chair - Graphite/Black - Size B

  • Bundle - With these office chair replacement parts, you'll get everything you need to breathe life into your old chair - step-by-step instructions,....
  • No Sinking - You need a chair that supports you while you're at work, or at home. Our replacement chair cylinder is built to last a lifetime, without....
  • Universal Gas Lift - Our gas lift fits just about any office chair, and is compatible with most popular office chair brands! No need to sweat a lift....
  • Class 4 Cylinder - Our heavy duty pneumatic piston replacement cylinder is a class 4, OEM-standard hydraulic device that won't let you down....
  • Money Saver - Don't sink your money into a whole new chair that, well, sinks. This gas lift cylinder is a cost-effective alternative to making sure....
Check Stock

DAJAVE 2 Pack 5.5 Inch Office Chair Cylinder Replacement, Office Chair Gas Lift Cylinder, Hydraulic Pneumatic Shock Piston Heavy Duty(1000lbs) Universal Size Fits Most Executive Chairs

  • [2Pcs Gas Lift Cylinders] You will get 2 office chair cylinder replacement to fix your sinking office chair by replacing the cylinder instead of spending hundred bucks for a new computer chair.
  • This hydraulic piston is suitable for almost all office chairs (salon chairs, work chairs, executive chairs, rolling stools)..
  • [1000lbs Office Chair Cylinder] The office chair piston maximum weight it supports is 1000Lbs, which is much heavier than an ordinary gas cylinder for office chair..
  • [11.8" to 17.4" Long Adjustable Gas Lift Cylinder] Minimum length: 11.8 inches.
  • maximum length when fully extended: 17.4 inches.
  • adjustable range: 5.5 inches, Load capacity: 1000lbs.
  • Office Chair Cylinder Replacement: Full 360 degree rotation, smooth and noiseless movements to all directions. You can use this chair cylinder replacement for your office chair, gaming chair, desk chair and swivel chair etc..
  • Easy To install: This office chair cylinder is relatively simple to install,and can be installed easily with no additional screws required..
Check Stock

HOSALI Office Chair Cylinder Replacement,Heavy-Duty Gas Lift Cylinder Fits Most Chairs,Highest End Class 4 Hydraulic Pneumatic Piston, Universal Size

  • UNIVERSAL SIZE THAT FITS MOST CHAIRS: This chair cylinder replacement will fit all office chair bases with 50mm(2 inches) standard centre hole. Ideal to replace gas lift cylinder on 99% standard office chairs, task chairs, executive chairs, salon chairs and rolling stools on the market. SAVE MONEY - to fix your sinking office chair by replacing the cylinder instead of spending hundred bucks for a brand new computer chair. ( Please measure dimensions before purchasing ).
  • HEAVY DUTY CLASS 4 PISTON - ANTI-EXPLOSION CYLINDER: Our office chair piston passed the top-level test of BIFMA and TUV certification by lifting up and down 120,000 times without fail, they built with high-quality solid steel that can support maximum weight up to 1000 lbs. The safety decompression structure design will be more secure than other gas lift cylinder you ever use..
  • 5.5’’ PISTON STROKE FOR ADJUSTING CHAIR HEIGHT: This chair piston extends from 285mm to 425mm ( 11.22 - 16.7"), minimum length: 11.22 inches.
  • maximum length when fully extended: 16.7 inches, travel from the highest to the lowest point, replace your office chair gas cylinder and stop worrying about disturbing anyone, 360 degree rotation to all directions, freely lift and rotate your office chair smoot....
Check Stock

MYFULLY Office Chair Cylinder Replacement | Chair Gas Lift Cylinder 5 inch Long Extension Stroke Adjust Universal Size Lift Cylinder Fits Most Executive Chair Swivel Chair

  • Heavy Duty Office Chair Cylinder: The gas lift cylinder holds up to 385lb/175kg on most Swivel chairs. Hydraulic pneumatic shock piston is certified by SGS,high safety and explosion-proof,more durable..
  • 5" Piston Stroke for Adjusting Chair Height: Outer cylinder diameter: 1.9".
  • Smooth Operation & Noiseless: This chair cylinder replacement uses upgrade stainless steel lift rod. Full 360 degree rotation, smooth and noiseless movements to all directions..
  • Universal Chair Cylinder: Our office chair piston will fit most office, executive and computer chairs.(salon chairs, executive chairs, work chairs, rolling stools) on the market..
  • Easy to Install: This office chair cylinder replacement can be installed easily with no additional screws required. Take several minutes to refresh your old office chair and save costs! Package includes: a gas cylinder for office chair.
Check Stock

Office Owl Office Chair Cylinder Replacement Super Bundle (Includes Removal Tool, Gloves an Instructions) Universal Size Heavy Duty Gas Cylinder for Office Chairs. Pneumatic Piston/Hydraulic Piston

  • ✅WHAT’S INSIDE YOUR OFFICE CHAIR CYLINDER SUPER BUNDLE? ! We included literally EVERYTHING you need to replace your office chair gas cylinder easily, quickly and painlessly! Featuring: Printed STEP BY STEP INSTRUCTIONS, premium GLOVES for gripping the cylinder and keeping your hands grease free, and a REMOVAL TOOL for effortless removal of the old cylinder. We included everything you need to revive your ageing office chair!.
  • ✅BREATHE NEW LIFE INTO YOUR OLD CHAIR : If your office chair starts sinking, SAVE MONEY by purchasing our office chair cylinder instead of spending money on a brand new chair! This purchase makes total sense, and comes with everything you need for a painless replacement! Backed by our money back guarantee, there is no reason NOT to make this purchase!.
  • ✅UNIVERSAL SIZE GAS LIFT: Our office chair cylinder replacement will fit just about any office chair including popular brands such as Herman Miller, Hon and Amazon Basics! If for some odd reason it doesn’t fit your specific office chair, return it for a no questions asked refund and we will even pay for the return shipping. You have nothing to lose!.
  • ✅SUPER HEAVY DUTY CLASS 4 CYLINDER! Our pneumatic piston replacement cylinder is class 4 – the highest qu....
Check Stock

18' to 28' Long Adjustable Gas Lift Cylinder Tube for Bar Stool Drafting Chair Replacement Parts,Heavy Duty Hydraulic Pneumatic Cylinder Shock Piston

  • Study & Heavy Duty: Certified by SGS test (USA) & Higher Standard LGA test (GER), use of high quality materials and thickened outer steel, this gas lift cylinder is of really high quality and durability, weight capacity: 450 lbs..
  • Universal size: 10 stroke cylinder piston tube,the lowest height is 17.7", the highest height is 27.7", which means this hydraulic lift has a height range of 10 inches..
  • Longer service life:These high standard office chair cylinder are more reliable and you get a free replacement for any non-human quality problem within 5 years..
  • Chair replacement parts: Suitable for bar stool ,drafting chair,high stool,smooth rise and fall, and supports 360 degrees of rotation..
  • Easy to Install: Usually you will need to use a hammer to remove the old gas lift cylinder from the chair base and replace it with a new one. (We recommend that you search for "gas lift replacement" on YouTube).
Check Stock