Reviews Heavy Dual Wall Tubing

10pcs 2/0 Gauge 2/0 AWG x 5/16” Pure Copper Cable Lug Terminal Ring Connectors with Dual Wall Adhesive Lined Red + Black Heat Shrink Tubing – by WNI

  • Includes pure copper cable lugs + black & red heavy duty dual wall adhesive lined heat shrink tubing. Use selection tabs to choose cable lug gauge/stud size and package quantity..
  • Pure copper cable lugs are designed to fit solid or stranded cable. Cable can be crimped or soldered to cable lug..
  • Cable lug utilizes a closed end design to keep moisture and other contaminants from entering and degrading or corroding the copper cable. Flared cable lug entry hole allows for the easy insertion of cable..
  • Dual wall, polyolefin heat shrink tubing contains a heat activated adhesive/glue which creates a seal to prevent water, solvents, and salts from entering into the cable. Package includes 1.5 inches of heat shrink tubing per cable lug (half black and half red).
  • Heat shrink tubing shrink ratio is approximately 3 to 1 (shrinks to 1/3 of its original diameter). Heat shrink tubing ratings: Temperature: -55°C to 105°C Voltage: 600V.
Check Stock

ELECFUN 2in Heat Shrink Tubing 3 1 Large Marine Heat Shrink Tube Dual Wall Adhesive Shrinkable Wire Wrap Tube Fully Insulation 4 Feet Black Tubing and 4 Feet Red Tubing

  • Package: 4 ft long Black 2inch (Diameter) Heat Shrink Tubing 3:1 Dual Wall, and 4 ft long Red 2inch (Diameter) Heat Shrink Tubing 3:1 Dual Wall..
  • 3:1 Shrink Ratio & Fast Shrink: Shrink ratio of our industrial heat shrink tubing is 3:1, which makes a tighter seal. Shrinkage temperature: 80 ~....
  • Adhesive Lined Heat Shrink Tubing: While heating, the adhesive lined comes out and seals the connection, creating waterproof and long-lasting....
  • Dual Wall Tube & Safer: Outer wall provides abrasion resistance. Inner wall creates a waterproof seal and strain relief..
  • Wide Applications: Our waterproof heat shrink tubing can be used for solder point protection, reinforcing earphone and mobile charging cables, LED....
Check Stock

ELECFUN 3/8in Heat Shrink Tubing 3:1 Large Marine Heat Shrink Tube Dual Wall Adhesive Shrinkable Wire Wrap Tube, Fully Insulation (4 Feet Black Tubing, and 4 Feet Red Tubing)

  • Package: 5pcs 0.8ft Black 3/8inch (Diameter) Heat Shrink Tubing 3:1 Dual Wall, and 5pcs 0.8ft Red 3/8inch (Diameter) Heat Shrink Tubing 3:1 Dual Wall..
  • 3:1 Shrink Ratio & Fast Shrink: Shrink ratio of our industrial heat shrink tubing is 3:1, which makes a tighter seal. Shrinkage temperature: 80 ~ 125℃, professional connections made in seconds..
  • Adhesive Lined Heat Shrink Tubing: While heating, the adhesive lined comes out and seals the connection, creating waterproof and long-lasting insulation..
  • Dual Wall Tube & Safer: Outer wall provides abrasion resistance. Inner wall creates a waterproof seal and strain relief..
  • Wide Applications: Our waterproof heat shrink tubing can be used for solder point protection, reinforcing earphone and mobile charging cables, LED filament maintenance, RC aircraft, vehicle maintenance, eyeglass temples, and headband DIY..
Check Stock

Westin 40-2075 Black Sportsman Grille Guard

  • CUSTOM LOOK. This grill guard adds an aggressive, aftermarket look to your vehicle, accenting its existing features and integrating with the design of the front end. It also features pre-drilled light mounting holes for LED lights.
  • STRONG BUILD. This grille guard is constructed with a high-strength, one-piece frame, using welded steel tubing. The tubing is 1.5-inch diameter, heavy-wall tubing for maximum strength and rigidity.
  • CORROSION-RESISTANT. To protect this grill guard from the elements, it features a dual-layer E-coat and black powder coat finish, ensuring maximum resistance to rain, dirt and other corrosive threats.
  • EXTRA PROTECTION. For extra protection on the front end of this grille guard push bar, the vertical risers are covered in rubber stripping. This protects the finish and maintains a clean, consistent look.
  • NO-DRILL. This ARIES grille guard installs with no drilling needed, and it fits select model years of the Ram 1500 and Dodge Ram 1500.
Check Stock

10 pcs 8 AWG 8 Gauge Butt Splice Connector Pure Copper Tin Coated Marine Grade Uninsulated - by WindyNation

  • Includes AWG splice butt connectors (use selection tabs to choose gauge size and quantity desired) + black dual wall adhesive lined heat shrink tubing (2 inches of heat shrink tubing per connector).
  • Butt connectors are made of pure copper with excellent electrical conductivity. Tin plated for corrosion resistance. Perfect for marine environments and outdoor use..
  • Dual wall polyolefin heat shrink tubing contains a heat activated adhesive/glue which creates a seal to prevent water, solvents, and salts from entering into the cable. Package includes 2 inches of heat shrink tubing per connector..
  • Designed to fit solid or stranded wire. Easily connect spliced cables to connectors for a non-insulated seamless connection. Connectors can be crimped or soldered. .
Check Stock

Waterproof Heat Shrink Tubing Kit 350 pcs ELECFUN 3 1 Dual Wall Tube - Adhesive Lined - Marine Heat Shrink Tubing Black 7 Sizes

  • [3:1 Shrink Ratio & Fast Shrink] Shrink ratio of our industrial heat shrink tubing is 3:1, which makes a tighter seal. Shrinkage temperature: 80 ~ 125℃, professional connections made in seconds..
  • [Adhesive Lined Heat Shrink Tubing] While heating, the adhesive lined comes out and seals the connection, creating waterproof and long-lasting insulation..
  • [Dual Wall Tube & Safer] Outer wall provides abrasion resistance. Inner wall creates a waterproof seal and strain relief..
  • [7 Sizes] Heat shrink tubing kit includes 7 most commonly used diameters ranging from 3/32" to 3/4". Heat shrink tubing is precut to 1.77in..
  • [Wide Applications] Our waterproof heat shrink tubing can be used for solder point protection, reinforcing earphone and mobile charging cables, LED filament maintenance, RC aircraft, vehicle maintenance, eyeglass temples, and headband DIY..
Check Stock

ARIES 1052 1-1/2-Inch Black Steel Grille Guard, No-Drill, Select Jeep Grand Cherokee

  • CUSTOM LOOK. This grill guard adds an aggressive, aftermarket look to your vehicle, accenting its existing features and integrating with the design of the front end. It also features pre-drilled light mounting holes for LED lights.
  • STRONG BUILD. This grille guard is constructed with a high-strength, one-piece frame, using welded steel tubing. The tubing is 1.5-inch diameter, heavy-wall tubing for maximum strength and rigidity.
  • CORROSION-RESISTANT. To protect this grill guard from the elements, it features a dual-layer E-coat and black powder coat finish, ensuring maximum resistance to rain, dirt and other corrosive threats.
  • EXTRA PROTECTION. For extra protection on the front end of this grille guard push bar, the vertical risers are covered in rubber stripping. This protects the finish and maintains a clean, consistent look.
  • NO-DRILL. This ARIES grille guard installs with no drilling needed, and it fits select model years of the Jeep Grand Cherokee.
Check Stock

3 Square Tubing Heavy Duty Plastic Plug End Cap Insert 3x3 8-14 Tube Pipe Post 1

  • High quality heavy duty thick wall plastic finishing plug, end cap for 3" steel square tubing..
  • Fits inside tube diameters from 2.65'' to 2.82'' (2 11/16'' to 2 13/16'') Compatible Outside Tube Diameter: 3'' x 3'' Compatible Tubing Wall....
  • Thick heavy wall plastic plugs for square tubing are manufactured to provide a secure fit on multiple tube gauges. These tube plugs are perfect for....
  • If you need more than 1 please change the quantity to the number desired. The more you buy the less each plug will cost..
  • Color: Black Compatible Outside Tube Diameter: 3.000 in Compatible Inside Tube Diameter: 2.65" - 2.82" Compatible Thickness Range: 08-15 gauge....
Check Stock

AIRIC 3/8in Heat Shrink Tubing Roll, 3:1 Heat Shrink Tube Adhesive Lined - Dual Wall Tube - Marine Heat-Shrink Tubing Industrial, Black, 50 Feet Roll

  • What You Get: Industrial black heat shrink tubing roll, Dia 3/8 inch (9.5mm), 50 feet length..
  • Adhesive Lined Black Heat Shrink Tubing: While heating, the adhesive lined comes out and seals the connection, creating waterproof and long-lasting insulation. Industrial grade tubing is resistant to fluids, heat, and mechanical stretch..
  • 3:1 Shrink Ratio & Fast Shrink: Shrink ratio of our industrial heat shrink tubing clear is 3:1, which makes a tighter seal. Shrinkage temperature: 80 ~ 125℃, professional connections made in seconds..
  • Safer Dual Wall Tube: Outer wall provides abrasion resistance. Inner wall creates a waterproof seal and strain relief. Outer wall is flame retardant, but the glue is not flame retardant..
  • Wide Applications: Our clear waterproof heat shrink tubing industrial can be used for solder point protection, reinforcing earphone and mobile charging cables, LED filament maintenance, RC aircraft, vehicle maintenance, eyeglass temples, and headband DIY..
Check Stock

ARIES 4088 1-1/2-Inch Black Steel Grille Guard, No-Drill, Select Chevrolet Colorado, GMC Canyon

  • CUSTOM LOOK. This grill guard adds an aggressive, aftermarket look to your vehicle, accenting its existing features and integrating with the design of the front end. It also features pre-drilled light mounting holes for LED lights.
  • STRONG BUILD. This grille guard is constructed with a high-strength, one-piece frame, using welded steel tubing. The tubing is 1.5-inch diameter, heavy-wall tubing for maximum strength and rigidity.
  • CORROSION-RESISTANT. To protect this grill guard from the elements, it features a dual-layer E-coat and black powder coat finish, ensuring maximum resistance to rain, dirt and other corrosive threats.
  • EXTRA PROTECTION. For extra protection on the front end of this grille guard push bar, the vertical risers are covered in rubber stripping. This protects the finish and maintains a clean, consistent look.
  • NO-DRILL. This ARIES grille guard installs with no drilling needed, and it fits select model years of the Chevy Colorado and GMC Canyon.
Check Stock

FOR Toyota 2001-2004 Tacoma Grille Black Headlight Park Light 5Pcs TO2502136 TO2503136 TO2520163 TO2521163 TO1200250

  • CUSTOM LOOK. This grill guard adds an aggressive, aftermarket look to your vehicle, accenting its existing features and integrating with the design of the front end. It also features pre-drilled light mounting holes for LED lights.
  • STRONG BUILD. This grille guard is constructed with a high-strength, one-piece frame, using welded steel tubing. The tubing is 1.5-inch diameter, heavy-wall tubing for maximum strength and rigidity.
  • CORROSION-RESISTANT. To protect this grill guard from the elements, it features a dual-layer E-coat and black powder coat finish, ensuring maximum resistance to rain, dirt and other corrosive threats.
  • EXTRA PROTECTION. For extra protection on the front end of this grille guard push bar, the vertical risers are covered in rubber stripping. This protects the finish and maintains a clean, consistent look.
  • NO-DRILL. This ARIES grille guard installs with no drilling needed, and it fits select model years of the Toyota Tacoma.
Check Stock

Wirefy Heat Shrink Tubing Kit - 3 1 Ratio Adhesive Lined Marine Grade Shrink Wrap - Automotive Industrial Heat-Shrink Tubing - Black Red 200 PCS

  • 3:1 SHRINK RATIO - Recovers to 1/3 of its original diameter, and makes a tight seal. Eliminates the problem of 2:1 tubing not shrinking tight enough..
  • GLUE INSIDE - When heat is applied, adhesive comes out and seals the connection, creating waterproof and long-lasting insulation..
  • VARIETY OF SIZES - We have included larger diameter heat shrink tubing ranging from 1/8" to 1". Shrink tubing is precut to 1.75 inches..
  • EASY TO USE - Simply slide heat shrink tube over your connection point and apply heat. Professional connections made in seconds..
  • DUAL WALL TUBING - Outer wall provides abrasion resistance. Inner wall creates waterproof seal and strain relief..
Check Stock

ARIES 3067 1-1/2-Inch Black Steel Grille Guard, No-Drill, Select Ford F-250, F-350 Super Duty

  • CUSTOM LOOK. This grill guard adds an aggressive, aftermarket look to your vehicle, accenting its existing features and integrating with the design of the front end. It also features pre-drilled light mounting holes for LED lights.
  • STRONG BUILD. This grille guard is constructed with a high-strength, one-piece frame, using welded steel tubing. The tubing is 1.5-inch diameter, heavy-wall tubing for maximum strength and rigidity.
  • CORROSION-RESISTANT. To protect this grill guard from the elements, it features a dual-layer E-coat and black powder coat finish, ensuring maximum resistance to rain, dirt and other corrosive threats.
  • EXTRA PROTECTION. For extra protection on the front end of this grille guard push bar, the vertical risers are covered in rubber stripping. This protects the finish and maintains a clean, consistent look.
  • NO-DRILL. This ARIES grille guard installs with no drilling needed, and it fits select model years of the Ford F250 Super Duty and F350 Super Duty.
Check Stock