Magnetic Helping Hands Third Arm Soldering Work Station | EXtra Large & Heavy Duty Base Plate | 5 Flexible Arms with Precision 360 Degree Alligator Clip
- 【Upgrade Heavy Duty Powder Coated Metal Base】Massive 11.4" x 7.1" Powder Coated Steel Base，over 3.3 pounds，and extremely sturdy to ensure your workstation doesn't tip over or move an inch.The Rubber Feet of the base ensure stability and protect your worktop from scuffs and scratches..
- 【5 Magnetic Based Flexible Metal Arms】5 adjustable metal gooseneck arms with strong magnetic base,can be magnetically repositioned throughout the base to suit any size project.2 arms are 11" long, 3 arms is 4.7".Completely free your hands up and work easier than ever before..
- 【360 Degree Alligator Clamps with Removable Silicone Protectors】The clips are stainless steel and have a strong spring. Can be rotated 360 degrees then "locked" into place with knurled thumb nuts. They are strong to keep a tight grip on your components allowing you position them wherever you like..
- 【Strong Magnets 】with 6 Pillar Holders can be moved at will.Strong earth magnet embeded.Magnetic arms can be positioned anywhere on heavy steel base..
- 【What You Get】1X Heavy Metal Base,6X PCB Board Fixed Clips,5X Universal Joint Pipe,5X Alligator Clips.100% Satisfaction Guarantee.Our worry-free 36-month warranty and friendly customer service..
Check StockLudwig LE-1368 Orchestral Bell Stand
- Versatile, heavy-duty stand features strong, single-braced steel legs, heand-sized grips and large serrated rubber feet.
- The Ludwig LE-1368 orchestral bell stand gives you a heavy-duty tripod base, adjustable height, and rubber tipped folding arms and feet.
Check Stock
Invacare Tracer IV Bariatric Folding Wheelchair for Adults
- This model features a weight capacity of 350 lbs. & 450 lbs. The desk-length arms are fixed height and padded for user comfort. The front casters are 8" semi-pneumatic, and the rear wheels are 24" composite pneumatic tires with flat-free inserts providing a smooth ride..
- Combining a reinforced, heavy-duty carbon steel frame which includes gusseted sides, caster journals and dual cross-braces, the Tracer IV Wheelchair is long-lasting and low-maintenance. Heavy-duty seat liner provides added durability..
- Heavy-duty inner liners keep seat and back from stretching..
- Attractive, silver vein finish. Padded, desk-length arms for added comfort..
- 14-gauge cross-braces add durability and strength. Folds to 13" wide for convenient travel and storage..
- Desk-length arms allow individuals to pull close to a table, desk, or surface. Front riggings, such as T94HEP / T94HAP / T94HCP / T93HAP / T93HCP / T94HEP, leg rests and foot rests, are sold separately..
Check StockGRIND Fitness Chaos 4000 Power Rack Chaos4000 + Flat Bench
- BEEFIEST SQUAT RACK - We decided to pull out all the stops and create the biggest, baddest squat rack we could at a price people could afford. The....
- SAFETY SPOTTER ARMS INCLUDED - Every Chaos4000 comes with safety spotter arms in the box. It's advised to use the spotter arms when bench pressing or....
- HEAVY-DUTY WEIGHT PEGS- You need somewhere to hold your weight plates and on the back of your rack is the ideal spot. It will keep your rack stable....
- COMMERCIAL QUALITY FOR THE HOME GYM - The Chaos4000 is capable of holding heavy loads and often. However, we designed it with features specifically....
Check StockGRIND Fitness Chaos 4000 Power Rack Chaos4000
- BEEFIEST SQUAT RACK - We decided to pull out all the stops and create the biggest, baddest squat rack we could at a price people could afford. The....
- SAFETY SPOTTER ARMS INCLUDED - Every Chaos4000 comes with safety spotter arms in the box. It's advised to use the spotter arms when bench pressing or....
- HEAVY-DUTY WEIGHT PEGS- You need somewhere to hold your weight plates and on the back of your rack is the ideal spot. It will keep your rack stable....
- COMMERCIAL QUALITY FOR THE HOME GYM - The Chaos4000 is capable of holding heavy loads and often. However, we designed it with features specifically....
- GRIND FITNESS - The GRIND Fitness makes durable grym equipment for home at a great price. Build your home gym with all the other workout equipment we....
Check StockStoreYourBoard SUP Rack, 3 Paddleboard Wall Storage
- Heavy duty, all steel construction supports heavy paddleboards.
- Extra thick padding on arms to prevent damage to SUPs.
- Comfortably holds race, touring, surf, and inflatable paddle boards.
- Removable arms save you space when rack is not in use.
- Includes all mounting hardware and installation instructions.
Check Stock
Hawk Sports Arm Blaster for Biceps & Triceps Dumbbells & Barbells Curls Muscle Builder Bicep Isolator for Bodybuilding & Weight Lifting Support for Strength & Muscle Gains (Black)
- ✅CONTOURED DESIGN: 24'' long arm blaster to support & preserve optimal form while doing heavy bicep curls..
- ✅ADJUSTABLE STRAP: The heavy duty steel buckle allows flexibility & fitment to maintain a proper posture according to all individual body types while isolating the arms. #HawkSports to join our growing community of strong people :).
- ✅NEOPRENE & FOAM PADDED: The arms blaster has neoprene padding to rest against the neck to avoid rashes. Also, the aluminium is foam padded to rest the arms with ease..
- ✅HEAVY DUTY HYPERTROPHY: Use our Arm Blaster for Bicep Support and maximum strength building during your upper body workouts to help build bigger biceps, triceps and shoulder muscles faster..
- ✅LIFETIME WARRANTY TO ACCOMPLISH YOUR FITNESS DESIRES: we are working hard to provide you with the best quality products. However, if for any reason you're not completely satisfied with hawk arm blaster for big biceps, please contact us. We will provide the best customer services..
Check Stock
HTM-202 Black Silicone Soldering Mat Heat Resistant Large Magnetic Electronic Repair Work Mat,Expand Work Area for Soldering, Electronics, Computer Repair Etc
- 【Upgrade Heavy Duty Powder Coated Metal Base】Massive 11.4" x 7.1" Powder Coated Steel Base，over 3.3 pounds，and extremely sturdy to ensure your workstation doesn't tip over or move an inch.The Rubber Feet of the base ensure stability and protect your worktop from scuffs and scratches..
- 【4 Magnetic Based Flexible Metal Arms】4 adjustable metal gooseneck arms with strong magnetic base,can be magnetically repositioned throughout the base to suit any size project.2 arms are 11" long, 2 arms is 4.7".Completely free your hands up and work easier than ever before..
- 【360 Degree Rotation Hot Air Gun Frame】 It has a strong magnetic base, which can be fixed on any metal object. It is easy to work. The bracket part can be rotated 360 degrees, and the clamp part can be adjusted in width according to work requirements. It is a good helper for DIY..
- 【Strong Magnets 】with 6 Pillar Holders can be moved at will.Strong earth magnet embeded.Magnetic arms can be positioned anywhere on heavy steel base..
- 【What You Get】100% Satisfaction Guarantee.Our worry-free 36-month warranty and friendly customer service..
Check StockCAP Barbell Safety Catches / Spotter Arms for FM-905Q Color Series Black
- BUILT TOUGH – Made with 10 & 11-gauge steel & welded to a 3-sided face plate, these safety catches offer the security & grip needed when using the....
- HEAVY-DUTY – With a maximum static weight capacity of 500 pounds and 10 & 11-gauge steel construction, these catches safely support heavy loads.....
- ADJUSTABLE – Easily adjust safety catches to preferred height for squats or bench presses. Simply twist & pull spotter arm & insert into desired....
- DEPENDABLE – 16-inch length of these spotter arms provides support needed when going heavy. Welded end caps prevent bar from rolling or slipping off....
Check Stock
VIVO Premium Dual Ultra Wide LCD LED 27 to 38 inch Monitor Desk Mount, Heavy Duty, Adjustable Telescoping Arms, Flush Wall Setup, Fits 2 Screens, Black, STAND-TS38C
- Fits 27” to 38” Monitors - Dual monitor mount fitting two ultrawide and regular screens up to 38” in size and 22 lbs in weight (each) with VESA 75x75mm or 100x100mm mounting holes. Secures to your desk with a heavy-duty C-clamp or optional grommet mount for solid stability. Maximum recommended desktop thickness is 3.25”. --Patent Pending--.
- Premium Telescoping Arms for Flush Setup - Heavy duty arms adjust in length to fit larger, ultra-wide monitors. Unique telescoping design expands arms straight outwards so that nothing extends past the back edge of your desk, creating a flush-to-wall setup. The arms slide into each other for added strength and stability..
- Articulation & Height Adjustment - Adjustable mount offers +90° to -90° tilt, 180° swivel, 360° rotation, and height adjustment along the center pole. Monitors can be placed in portrait or landscape orientation..
- Easy Installation - Mounting your monitors is a simple process with detachable VESA brackets. The stand secures to your desk (up to 3.25” thick) via heavy-duty C-clamp or optional grommet mount for excellent support. Instructions and hard....
Check Stock
180°|Helping Hands| Workbench| Helping Hands Soldering With Four 360° Lockable Stainless Steel Arms| 1KG Weighted Stainless Steel Base With Non-Slip Rubber Feet| Tool For Soldering & Electronic Repair
- 【How Do You Choose the Best Soldering for Helping Hands?】1)Foundation- The best soldering helping hand station should have a heavy and well-protected base to ensure stability and durability 2)Arms-The best helping hand has at least two or more flexible arms 3)Alligator Clips-These clips have grippy metal teeth and silicone or rubber covers. Keep in mind that alligator clips have limited openings. A soldering station with interchangeable clips is the best option for greater versatility..
- 【Amazing Helping “Third Hand”】The 180° Third Hand Helping Arms Tool is the perfect addition to any jeweler, electrician, or hobbyist toolbox. These helping hand features make it ideal for soldering, repairing, jewelry, and other projects that require attention to detail..
- 【Weighted Stainless Steel Base & Non-Slip Rubber Feet】Unique & Heavy Stainless Steel base for greater stability with rubber legs that prevent movement.
- 【Four 360° Lockable Stainless Steel Arms】This tools comes with four flexible gooseneck arms made of industrial grade rubber(4 large tentacles) and four durable stainless steel alligator clamps. These clamps have a magnetic repositioning throughout the base.
- 【WARRANTY and SERVICE】Provides you with 24-hour email contact service & 3....
Check Stock
Helping Hands Soldering, Toolour Magnetic Helping Hand for Soldering, 4 PCB Circuit Board Holder and Flexible Helping Arms, Third Hand Tool with Heavy Duty Base for Electronic Repair Hobby Craft
- Helping Hands Soldering: Circuit Board Holder has 4 pillars, each pillar is magnetic, adjustable magnetic helping hands can be positioned anywhere on the heavy steel base, which can support any shape of the board. Completely free your hands and let you focus on the soldering detail work once start using our excellent third-hand soldering tools..
- Magnetic Helping Hand Tool: 4 flexible metal gooseneck arms with strong magnetic base, which have a powerful attraction to the steel base. We included two 9.8″ arms, two 5.9″ arms helping hand arms, completely free your hands up and work easier than ever before. The 360° rotating alligator clip allows you to be more flexible in welding work..
- Magnetic PCB Holder Pillars: 4 small pillars can hold a PCB board by their multi-layer or tips through the location hole component point. Full metal body is anti-rust and corrosion-resistant, powder-coated promises a longer usage. To make sure the PCB you worked on can be positioning steadily, the pillars’ tips are better to hold boards by 4 location holes..
- Stainless Steel Base: 9″ x 5. 9″ heavy duty base with industrial-grade weighted construction, never tip over, powder-coated iron base. 4 pcs rubber feet prevent the stable soldering station from sliding ....
Check Stock
Helping Hands Soldering, NAKOOS Third Hand Soldering Tool PCB Holder Station with 4 Flexible Metal Arms Solder Iron Stand Heavy Duty Steel Base for Jewelry Crafts Repair Hobby
- 【Upgraded Gooseneck Arms】NAKOOS helping hands is built strong. This soldering helper comes with 4 upgraded gooseneck arms. They are made of stainless steel. Corrosion resistant and stronger than cheap plastic arms. And The arms are heavy duty and move perfectly to where you need them..
- 【Weighted Metal Base】This third hand soldering tool has a heavy duty base. Not easy to move when you are doing soldering work. The bottom rubber pads make the base more stable and anti-slip. It isn't going to slide around on your workbench..
- 【Adjustable Alligator Clips】This helping hands soldering station has been equipped with stainless steel alligator clips on it’s arms. The clips are good and very adjustable. Each clip has 360 degree rotating adjustment extra rubber cover for PCB. Locks in place with knurled thumb nuts..
- 【Detachable Soldering Iron Stand】There is an additional metal soldering iron stand contained in the pack, solving the issue where to place the soldering pen after using. The stand is detachable and easy to install. Suitable for desoldering work..
- 【Widely Use & Service】 This solder station is easy and simple to set up, could be widely used in soldering, desoldering, electronic repair, crafting, modeling. NAKOOS is strict w....
Check Stock
